Festool crown stop with base is a dedicated support setup for the Kapex KS 120 EB, identified by manufacturer part number 494369, so it serves as a controlled reference for repeatable positioning when cutting nested moldings and similar work pieces on that saw. The adjustable stops support nested work pieces at any angle, which lets the operator rest the molding in a consistent nested position instead of holding it by hand during each cut. This same adjustment range supports different crown profiles or other angled stock while keeping the workpiece seated in a predictable orientation. As part of the Saws and Accessories category for woodworking power tools, the crown stop with base works within the normal cutting workflow at the Kapex station and provides an added bearing surface that helps stabilize longer or more awkward pieces during layout and cutting tasks.
The crown stop with base, specified as CROWN STOP W/BASE EXTENSION FOR KS120EB, is intended for use with FJ561287, the Kapex KS 120 EB, so it matches that saws layout and working geometry. Because it is for use with the Kapex KS 120 EB only, the geometry and contact surfaces are set up around that saws fence and table design, which helps the stop align with the saws cutting plane. In practice, the enhanced material support to the left or right works in direct relation to the Kapex KS 120 EB fence line, so once the stop is positioned, the user can bring pieces to the saw and rest them against a predictable support point.
The crown stop with base extension is described as a Saws and Accessories component for woodworking power tools, placing it naturally at the Kapex KS 120 EB miter saw station where moldings and other finish pieces are cut. The adjustable stops support nested work pieces at any angle, so it suits applications where the material is held in a nested orientation, such as when crown molding is positioned between the fence and table at an angle. Because the design provides enhanced material support to the left or right, it supports jobs where material extends beyond the immediate cut zone, such as trim, casings, or similar elongated profiles. By being described as a base extension for KS120EB, it functions directly at the saw base, helping the operator maintain the same relationship between stock, fence, and blade across a series of cuts when processing nested work.
The adjustable stops support nested work pieces at any angle, which means once the installer dials in a specific nested position for a chosen profile, that angle can be used as a consistent mechanical reference for repeated cuts. This consistency reduces the need to re-establish the holding angle on every piece because the stop provides a fixed contact point under the workpiece. The enhanced material support to the left or right translates into more of the workpiece bearing on a stable surface, which helps resist twisting or dipping as the Kapex KS 120 EB blade enters the cut. Being for use with FJ561287, the Kapex KS 120 EB, ties the reference surfaces of the crown stop with base directly to that saws fence and table alignment, so the stop position reflects the same geometry as the saw itself. Over a full run of nested cuts, these details support a more repeatable workflow where the operator brings each workpiece to the same support point, lowers the blade through the cut, and sees similar results piece after piece.
The Festool 494369 crown stop with base is for use with FJ561287, the Kapex KS 120 EB, so its geometry and support surfaces are set up specifically for that saw.
The crown stop adjustable stops support nested work pieces at any angle, providing a repeatable bearing point so angled profiles sit the same way for every cut.
The crown stop with base provides enhanced material support to the left or right, giving longer or angled pieces more surface contact near the cut line.
The CROWN STOP W/BASE EXTENSION FOR KS120EB works as a base extension at the Kapex KS 120 EB, increasing supported area where stock meets the saw table.
The Festool crown stop with base supports nested work pieces, making it useful when cutting crown molding or other angled profiles on the Kapex KS 120 EB.
The crown stop with base is classified under Saws and Accessories for woodworking power tools, positioning it as a dedicated support component for the Kapex KS 120 EB.
The CROWN STOP W/BASE EXTENSION FOR KS120EB, sold as Festool 494369, offers adjustable stops that support nested work pieces at any angle while providing enhanced material support to the left or right. For work centered on the Kapex KS 120 EB, this dedicated Saws and Accessories component adds a base extension that helps position and support angled or nested stock as it is brought to the blade. Wurth Baer Supply lists this product under woodworking tools and equipment, aligning it with professional and serious DIY workflows built around the Kapex KS 120 EB.
Sold In: 1 Each