Old English bun foot identifies this hardwood foot as a traditional rounded support that lifts and finishes the base of a cabinet or furniture piece. The 2-5/8 inch wide x 2-5/8 inch high size sets a consistent elevation, which helps align multiple units at the same height along a run. Grand River Wood Products construction ties this foot to the Adjust-A-Trim value line, which provides a machine made profile that repeats from piece to piece for uniform appearance. The hardwood material gives a solid wood base that can be worked with typical woodworking tools, matching common shop processes. Because all items are unfinished wood, the surface can be stained or painted to suit the final project, simplifying color matching. The bun foot design fits decorative hardware and moldings projects where a small, turned-style support is needed at each corner or along a face.
The 5/16 inch diameter hanger bolt integrated into this Old English bun foot provides the primary attachment point, so the installer works with a known thread size when connecting to a cabinet or furniture base. With the bun foot measuring 2-5/8 inches high, the vertical rise from the hanger bolt location to the floor is fixed, which helps when setting toe-kick clearances or aligning several cases. The 2-5/8 inch width defines the bearing area at the floor, which influences layout when placing feet near corners or along a rail. As part of Grand River's Adjust-A-Trim value line, the machine made construction keeps mounting dimensions consistent from foot to foot, supporting predictable drilling and layout jigs across a job.
The Old English bun foot from Grand River Wood Products fits decorative hardware and moldings projects where a compact, turned-style support is required. With its 2-5/8 inch wide footprint, it works on case pieces and cabinets that need a modest stance without spreading too far beyond the cabinet base. The 2-5/8 inch height places the case slightly above the floor, which can establish a visual break between flooring and woodwork and set a consistent reveal line under multiple units. As a hardwood part, it suits interior woodworking applications where solid wood components are standard, and it can be integrated into furniture, vanities, or built-ins that follow a traditional Old English look. The BF2749-H part number identifies this specific size and style within Grand River's bun feet lineup, which helps when selecting matching pieces for a coordinated installation on larger projects.
Grand River's Adjust-A-Trim designation on this bun foot indicates a value line of machine made components, which means each BF2749-H unit follows the same profile and dimensions to support uniform results across a row of cabinets. The unfinished hardwood construction leaves the surface open for your preferred finishing system, allowing stain or paint schedules to be planned around the raw wood rather than a prefinished layer, which helps match existing millwork. The 2-5/8 inch wide x 2-5/8 inch high sizing gives installers a clear reference for layout, so plinth heights, end panels, and adjacent moldings can be designed to meet the bun foot without awkward transitions. With a 5/16 inch diameter hanger bolt built into the design, the mounting method is defined, allowing the receiving component to be bored or fitted with compatible internal threads to streamline installation. Together, these verified details make the bun foot straightforward to integrate into woodworking projects that rely on repeatable dimensions and consistent visual lines.
The BF2749-H Old English bun foot measures 2-5/8 inches wide by 2-5/8 inches high, which sets both its floor footprint and the elevation it provides under a cabinet or furniture piece.
This Old English bun foot is hardwood, giving a solid wood component that can be machined, sanded, stained, or painted to coordinate with surrounding decorative hardware and moldings.
The Grand River bun foot is all unfinished wood, so the surface takes your chosen finish system, which helps match existing cabinetry, trim, or other hardwood components on the job.
The 5/16 inch diameter hanger bolt defines the mounting connection, so the mating cabinet or furniture base can be prepared with a corresponding threaded interface for secure attachment.
Adjust-A-Trim describes Grand River's value line of machine made bun feet, which supports consistent profiles and dimensions across multiple pieces for uniform appearance on larger installations.
The 2-5/8 inch high bun foot fixes the distance from cabinet bottom to floor, helping designers set toe-kick clearances and visual reveals consistently across a run of casework.
The Old English bun foot from Grand River Wood Products combines a 2-5/8 inch wide x 2-5/8 inch high profile with unfinished hardwood and a 5/16 inch diameter hanger bolt, giving you known dimensions and a defined mounting interface. As part of the Adjust-A-Trim value line, the machine made construction supports repeatable results when multiple feet are used on a project. For decorative hardware and moldings work that calls for a compact, traditional support, this BF2749-H bun foot aligns sizing, material, and attachment details into a straightforward choice.