2-Tier File Drawer System Kit, 14-3/4" x 22-5/8", Chrome
Description
Choose a pull-out file drawer system
2-Tier File Drawer System Kit gives cabinet shops, installers, and organized home offices a practical way to add filing storage inside an 18 inch wide base cabinet. This Rev-A-Shelf file drawer system is a chrome metal frame with two tiers and full extension ball bearing slides. The pull-out file drawer system mounts to a heavy duty frame and uses a telescoping rear bracket to fit cabinet depths from 19-3/4 inches to 24 inches. Buyers comparing a hanging file system for Pendaflex Systems or checking for Pendaflex Rails and Hanging File Rails support should focus first on cabinet opening size, cabinet depth, and whether a separate door mount is needed. Door mount kits using RSRV-DM-FDKIT are available separately.
See how file drawer components help
- Two-tier metal frame system - Gives the cabinet two filing levels in one pull-out assembly for better use of vertical space.
- Designed for 18 inch wide base cabinets - Helps buyers target the correct cabinet application before ordering.
- Full extension ball bearing slides - Allows the file drawer system to pull out fully for easier access to stored folders.
- 100 lb rated slides - Supports a substantial filing load when the system is installed as intended.
- Heavy duty metal frame - Provides a rigid base for file drawer components and repeated cabinet use.
- Telescoping rear bracket - Helps the Rev-A-Shelf file drawer system adapt to cabinet depths from 19-3/4 inches to 24 inches.
- Minimum cabinet opening of 14-1/2 inches wide - Gives a clear fit checkpoint for the cabinet opening before purchase.
- Minimum cabinet opening of 20-1/2 inches tall - Helps confirm vertical clearance for the two-tier hanging file system.
- Optional door mount kit available separately - Lets buyers add a door-mount setup if that cabinet layout requires it.
Confirm hanging file system fit
Key specs to confirm: This file drawer system is designed for installation in 18 inch wide base cabinets and requires a minimum cabinet opening of 14-1/2 inches wide by 20-1/2 inches tall. The frame uses a telescoping rear bracket for cabinet depths from 19-3/4 inches to 24 inches. The listed product size is 14-3/4 inches by 22-5/8 inches, and the finish is chrome. Buyers using this as a hanging file system should also confirm the filing format they plan to use, including whether Pendaflex Systems, Pendaflex Rails, Hanging File Rails, or Hanging File Bars match their folder setup. If any compliance, safety, or additional load details are needed beyond the verified 100 lb slide rating, confirm them with the manufacturer or technical documentation.
What's included: The verified product includes the two-tier metal frame pull-out file drawer system with full extension ball bearing slides mounted to a heavy duty metal frame. Door mount kits are not included and are available separately as RSRV-DM-FDKIT.
What to verify before ordering: Confirm your cabinet is an 18 inch wide base cabinet, the opening is at least 14-1/2 inches wide and 20-1/2 inches tall, and the cabinet depth falls between 19-3/4 inches and 24 inches. Check whether you need a separate door mount kit and verify your preferred hanging file format before purchase.
Use a Rev-A-Shelf file drawer system
Match the hanging file system to work
A two-tier pull-out filing setup is useful when a cabinet needs to store active paperwork without taking up desk space. In a home office, utility room, or work area, buyers often want hanging file storage hidden behind a cabinet front instead of exposed in a freestanding file cabinet. This Rev-A-Shelf file drawer system is built for that kind of application when the cabinet is an 18 inch wide base cabinet and the opening and depth meet the verified requirements.
The two-tier layout helps when one level is not enough. A buyer can separate current files from archived files, or keep household records on one tier and project folders on the other. Full extension ball bearing slides help because the frame pulls forward for access to both levels. The heavy duty metal frame matters in daily use because filing hardware needs to stay aligned when loaded and opened repeatedly.
Fit is the main issue to confirm before ordering. A pull-out file drawer system only works well when the cabinet opening is wide enough, tall enough, and deep enough for the frame and slide travel. This product requires a minimum opening of 14-1/2 inches wide and 20-1/2 inches tall, and the telescoping rear bracket supports cabinet depths from 19-3/4 inches to 24 inches. Buyers planning a door-attached front should note that the door mount kit is separate and should confirm whether RSRV-DM-FDKIT is needed for the installation.
Buyers also commonly ask whether a hanging file system supports their preferred file hardware. The verified data identifies this as a file drawer system kit, but folder rail style and filing format should still be checked before purchase. If your workflow depends on Pendaflex Systems, Pendaflex Rails, Hanging File Rails, or Hanging File Bars, confirm that your folders and support method match the intended setup. That extra check can prevent ordering delays and installation changes at the jobsite.
Compare pull-out file drawer system details
When comparing one file drawer system to another, the useful differences are usually installation range, access, and whether the frame is built for cabinet use. This product gives buyers several verified checkpoints: a two-tier metal frame, full extension ball bearing slides, a 100 lb slide rating, and a telescoping rear bracket that fits a defined cabinet depth range. Those details help a buyer evaluate whether the system matches the cabinet rather than relying on broad marketing language.
A generic filing insert may not provide a clear cabinet depth range or minimum opening requirement. This Rev-A-Shelf file drawer system does. That makes planning easier for cabinet shops and installers because the opening width, opening height, and cabinet depth can be checked before the unit is brought to the site. A heavy duty metal frame also indicates that the pull-out assembly is intended to be secured inside the cabinet rather than improvised from loose file drawer components.
Another practical comparison point is access. Full extension ball bearing slides help the user reach the file area more easily than a partial-extension setup. The optional door mount path is also useful for projects where the cabinet door should move with the pull-out frame, but buyers should remember that the door mount kit is sold separately. In short, this product is a strong fit for buyers who want a defined cabinet application, a chrome two-tier frame, and verified installation dimensions they can check in advance.
Ask fit questions before ordering
Will this file drawer system fit any base cabinet?
This file drawer system is designed for 18 inch wide base cabinets and requires a minimum opening of 14-1/2 inches wide by 20-1/2 inches tall.
What cabinet depth does this pull-out file drawer system need?
This pull-out file drawer system uses a telescoping rear bracket for cabinet depths from 19-3/4 inches to 24 inches.
Does the Rev-A-Shelf file drawer system include a door mount kit?
The Rev-A-Shelf file drawer system does not include the door mount kit. The compatible door mount kit is available separately as RSRV-DM-FDKIT.
What are the product dimensions listed for this kit?
The 2-Tier File Drawer System Kit is listed at 14-3/4 inches by 22-5/8 inches with a chrome finish.
How far do the slides extend?
The file drawer system uses full extension ball bearing slides, which allow the frame to pull out fully for access.
What load rating is verified for this product?
The full extension ball bearing slides on this file drawer system are verified as 100 lb rated.
Can I use this as a hanging file system for Pendaflex folders?
This hanging file system is intended for file storage, but Pendaflex Systems compatibility should be confirmed against your folder and rail setup before ordering.
Are Pendaflex Rails or Hanging File Rails included?
The verified listing describes a two-tier metal frame file drawer system kit. Rail and folder format details should be confirmed before purchase if your filing method depends on them.
What should I check before installation?
This product should be checked for cabinet width, opening size, cabinet depth, and whether a separate door mount kit is needed. Follow manufacturer installation guidance and local building requirements where applicable.
Order the right hanging file system
hanging file system buyers should start by matching the cabinet to the verified fit range for this Rev-A-Shelf kit. Confirm that your base cabinet is 18 inches wide, that the opening meets the minimum 14-1/2 inch by 20-1/2 inch requirement, and that cabinet depth falls between 19-3/4 inches and 24 inches. This chrome two-tier frame includes the pull-out file drawer system on full extension ball bearing slides, while the door mount kit is separate. If your filing method depends on Pendaflex-style hardware, verify that folder support details match your application before purchase.
