Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
High Temperature Contact Canister Adhesive gives installers a portable contact adhesive system designed for permanent bonding when immediate strength and good heat resistance are required. The canister format provides application control, so adhesive can be directed where needed on the job. The adhesive is non-flammable while using a flammable propellant, which supports site compliance where adhesive flammability is restricted but spray application is still required. Fast drying performance means the adhesive reaches handling strength quickly, helping keep fabrication or installation sequences moving. With 38% solids, the adhesive lays down a substantial bonding film, which supports secure bonds on properly prepared surfaces. This contact adhesive is green in color, making coverage easier to see during spraying, which helps reduce voids and rework in critical bond areas.
This Formica Adhesives contact adhesive is configured as a spray-applied system in a canister, so adhesive is atomized onto surfaces for even coverage across panels or parts. The stated dry time of about 3 minutes, based on conditions, means solvent flash-off happens quickly before mating surfaces, which supports efficient sequencing of multiple parts. With an open time of 30 minutes, the adhesive film remains bondable for a practical working window, allowing layout, positioning, and alignment before bringing the surfaces together. Once the two adhesive-coated faces contact within this window, the product is intended for permanent bonding where immediate bond strength matters. The good heat resistance described for this adhesive supports use in assemblies expected to see elevated temperatures during normal service.
This product is a Formica Adhesives contact adhesive in the canister contact adhesives category, so it is suited to applications that rely on contact bonding rather than clamping. The adhesive is specified for permanent bonding of materials where immediate bond strength and good heat resistance are required, so it fits jobs where parts must hold their position as soon as they touch. Because it is a high temperature contact canister adhesive with good heat resistance, it suits installations or fabrications that may encounter warmer environments in normal use. The web description notes that it is not recommended for use with plasticized vinyl, flexible plastics, or expanded polystyrene, so it is directed toward other compatible substrates in typical woodworking or fabrication work. The portable system with application control makes it practical on jobs where the workpiece cannot be moved easily to fixed spray equipment.
The fast drying behavior described for this adhesive means working surfaces can be coated, flashed off in roughly 3 minutes based on conditions, and then brought together without long idle periods, which helps maintain a consistent workflow across multiple panels. The 30 minute open time provides a defined window for bringing adhesive-coated surfaces into contact, helping installers plan steps such as fitting, trimming, and alignment while the film remains active. With 38% solids, the adhesive forms a substantive film on each surface, so when both sides are coated properly and pressed together they develop a permanent bond intended for long-term service. The non-flammable adhesive paired with a flammable propellant allows spray application while keeping the adhesive itself categorized as non-flammable, which can be important in environments with restrictions on adhesive flammability. The green color of the adhesive helps visually verify spray patterns and film build, supporting more repeatable coverage on critical bonding areas.
The Formica F-200G-177 unit is a high temperature contact canister adhesive in the canister contact adhesives category, so it is used where contact bonding with a portable spray system is preferred.
This contact adhesive has a dry time of about 3 minutes, based on conditions, so surfaces can be coated, flashed off, and then brought together without extended waiting periods.
The adhesive has an open time of 30 minutes, giving a working window between spraying and bringing the parts together, which supports alignment and layout steps before final contact.
This contact adhesive contains 38% solids, which builds a substantial adhesive film on each surface, supporting a strong permanent bond when the coated faces are pressed together.
The product is not recommended for use with plasticized vinyl, flexible plastics, or expanded polystyrene, directing it to other substrate types common in fabrication work.
The adhesive is described as fast drying with good heat resistance, so it is intended for permanent bonding in assemblies expected to experience elevated temperatures in normal use.
This Formica Adhesives high temperature contact canister adhesive combines a portable spray system, fast drying behavior, a 30 minute open time, and 38% solids to support permanent bonding when immediate strength and good heat resistance are required. The non-flammable adhesive with flammable propellant, green color for coverage visibility, and contact bonding action align with professional workflows that depend on efficient spraying and reliable film build. For projects using suitable substrates where contact bonding is the preferred method, this canister contact adhesive offers the performance characteristics described for demanding installation and fabrication work.
