Anti-Static Hose Connector Sleeve from Festool is designed to connect multiple lengths and sizes of suction hoses, which lets you configure the hose run to match each dust collection task. The connector works at the rotating connector end, so assembled hose sets can pivot with tool movement rather than fighting the operator during sanding, routing, or cutting. By joining different hose diameters, this sleeve helps match airflow to the application, supporting efficient pickup on a range of Festool dust extraction setups that use D 50, D 36, or D 27 hoses. Anti-static construction supports use as part of a complete anti-static dust extraction system, so static charge on the hose run is managed at the system level instead of at one component. Festool part number 493047 provides a repeatable reference when standardizing setups across multiple tools or workstations.
The Festool anti-static connector sleeve is intended for the rotating connector end of Festool hoses, so the joined sections maintain the same pivoting behavior found on the original hose connection. Because it works with D 50, D 36, and D 27 hoses, one connector can serve across common Festool dust extraction hose sizes, which simplifies how installers and shop crews arrange hose runs between tools. Using it within a complete anti-static dust extraction system aligns the hose junction with other anti-static components, so static reduction is handled across the extractor, hoses, sleeves, and couplings instead of at only one point in the path.
This Festool hose connector sleeve fits into dust extraction setups that rely on Festool D 50, D 36, and D 27 hoses, so it becomes a central link when routing suction from an extractor to multiple tools. At the rotating connector end, the sleeve ties hoses together at the same interface typically used at the tool or extractor, keeping the movement and handling characteristics familiar to experienced Festool users. When multiple hose lengths are joined, longer runs can be built to reach stationary machines, mobile carts, or on-site work areas while still working from a single dust extractor. The ability to bridge different hose sizes means the extractor side can stay on a larger diameter while the tool side uses a hose sized to its port, helping align suction with each tool without rebuilding the entire hose path.
The anti-static connector sleeve is specified for use as part of a complete anti-static dust extraction system, which means its materials and design support static dissipation along with anti-static extractors, hoses, sleeves, and couplings. In practice, this allows the junction between Festool D 50, D 36, and D 27 hoses to participate in the same static control strategy as the rest of the system, rather than acting as a break point. Because the connector is identified by Festool part number 493047, shops can standardize on a known component when equipping multiple stations, keeping hose interfaces consistent from bench to bench. Joining different hose diameters with one sleeve reduces the number of dedicated hose sets required, which streamlines storage and changeover when switching between small-port handheld tools and larger-port equipment.
The Anti-Static Hose Connector Sleeve connects multiple lengths and sizes of Festool suction hoses, so dust extraction runs can be tailored to tool location and port size on each job.
The connector sleeve works with Festool D 50, D 36, and D 27 hoses, so these three standard hose diameters can be joined or transitioned within one extraction setup.
The connector sleeve attaches at the rotating connector end of Festool hoses, so the joined sections maintain pivoting movement during tool use.
The anti-static connector sleeve is effective when used within a complete anti-static dust extraction system that also uses anti-static extractors or vacuums, hoses, sleeves, and couplings.
The Festool Anti-Static Hose Connector Sleeve is identified as manufacturer part number 493047, which helps specify the same component for repeat orders.
Joining different Festool hose sizes with this connector sleeve lets one extractor support tools with various port diameters without changing the core hose layout.
The Festool Anti-Static Hose Connector Sleeve 493047 is built to join Festool D 50, D 36, and D 27 suction hoses at the rotating connector end, which supports hose runs that move cleanly with the tool. Its role in a complete anti-static dust extraction system lets the junction participate in static control alongside the extractor, hoses, and couplings. For woodworking and installation crews using Festool dust collection, this connector provides a focused way to combine hose lengths and diameters so extraction can be matched to each application.
Sold In: 1 Each