Amerock Traditional Classics Clear/Satin Nickel 1-1/16" (27 mm) Diameter Knob, BP55266CG10

Amerock Traditional Classics Knob For Cabinets

Amerock Traditional Classics knob in the BP55266CG10 model gives cabinets a clear glass top with a satin nickel base, so the knob visually bridges glass fronts and metal hinges on the same run of doors. The 1-1/16 inch (27 mm) diameter head matches common cabinet knob sizing, which helps keep sightlines consistent when you are tying into existing layouts. A 3/4 inch projection sets the grip off the door face enough for fingers to pull comfortably while keeping the profile compact around adjacent doors. The zinc die-cast construction under the finish supports the glass top with a solid metal structure, which matters when knobs see regular daily use. The 11/16 inch base diameter steps the knob down at the point of contact, which helps it sit neatly on standard cabinet rail widths without visually overpowering narrower frames.

Key Details Of This Decorative Cabinet Knob

• The Traditional Classics collection design gives this knob a clear glass top and shaped details, so it can read as old world, art deco, or retro when matched to door styles in those themes.
• The combination of clear glass and satin nickel finish lets the knob coordinate with satin nickel hinges or pulls while keeping the grip visually lighter on darker cabinet finishes.
• The 1-1/16 inch diameter and 3/4 inch projection work together to offer comfortable fingertip access on doors and drawers while keeping hardware spacing under control in tight banks.
• The zinc die-cast material gives the knob a metal core that supports the glass detail, which is important when the knob is used repeatedly on busy kitchen or shop cabinets.
• The 11/16 inch base diameter keeps the footprint smaller than the head, so the knob settles cleanly on common frame widths and center-panel stiles without crowding decorative edges.

Installation Details For Amerock BP55266CG10 Knob

The Amerock BP55266CG10 knob uses an 8-32 x 1 inch screw size, so it matches a standard cabinet hardware thread that many drill jigs and boring patterns already anticipate. The 1-1/16 inch diameter head pairs well with a typical single-hole installation on doors and drawers, which helps align this knob with existing layouts when you are refreshing fronts. A 3/4 inch projection from the door face keeps the pull point close, so doors in tight reveals can swing without the knob colliding as readily with adjacent cabinets. The 11/16 inch base diameter gives a clear visual reference for centering on narrow rails, which is useful when working quickly across a large run of uppers and bases.

Using This Clear Glass Satin Nickel Knob On Projects

Where This Traditional Classics Knob Fits Best

The Traditional Classics collection design, with its clear glass detail and satin nickel base, suits cabinet runs where a single knob style must complement both framed and slab fronts. The 1-1/16 inch diameter is sized for standard cabinet doors and drawers, so the same knob can move from kitchen uppers to bath vanities without looking mismatched. The clear glass top reflects surrounding finishes while the satin nickel base ties into common hinge and slide finishes, which helps unify mixed-metal environments. With a 3/4 inch projection, the knob sits close enough to shallow drawers that it does not dominate smaller fronts, keeping the focus on door profiles and moldings. The zinc die-cast construction under the finish supports the glass visually and structurally, which matters when knobs are installed on high-traffic cabinets in residential or light commercial spaces.

Details That Support Consistent Layout And Replacement

The Amerock BP55266CG10 part number identifies this specific Traditional Classics knob with a clear glass top and satin nickel base, which helps maintain consistency when repeating the knob across multiple rooms or phases of a project. The 1-1/16 inch (27 mm) diameter aligns with many existing cabinet layouts, so replacing older knobs with this model generally keeps centerlines and edge distances visually similar to the original installation. The 11/16 inch base diameter creates a stepped profile between the head and the door face, which gives a clear edge for painters and finishers to work to when finishing or refinishing around installed hardware. The 3/4 inch projection keeps the knob from reaching too far into walkways, which is useful on island cabinets or tight hallway built-ins. The zinc die-cast material takes the satin nickel finish uniformly, so multiple knobs from the same series will present a consistent appearance when lined up across long banks of cabinets.

Practical Questions About Amerock BP55266CG10 Knob

Selecting This Knob For Cabinets And Drawers

The Amerock Traditional Classics knob BP55266CG10 combines a 1-1/16 inch clear glass head, 3/4 inch projection, and satin nickel zinc die-cast base to support consistent cabinet layouts. With an 8-32 x 1 inch screw size and 11/16 inch base diameter, it fits standard single-hole door and drawer installations while visually coordinating with satin nickel hardware runs.