Amerock Forgings Series Satin Nickel 1-1/4 in (32 mm) Diameter Knob, - BP4425G10

Amerock Forgings Satin Nickel Knob For Cabinets

Amerock Forgings satin nickel knob is a 1-1/4 inch (32 mm) diameter cabinet knob designed for kitchen or bath projects that call for a bold, rugged look. The knob is part of the Forgings Collection, so it brings an artisan-style appearance that suits decorative cabinet and furniture work where hardware needs to stand out visually. The knob uses a zinc die-cast construction, which creates a solid-feeling part that holds its detailed Forgings design consistently from piece to piece in multi-opening runs. The satin nickel finish gives a muted metallic surface that helps the knob coordinate with other satin nickel decorative hardware on doors and drawers without drawing glare. With a projection of 1-1/8 inch, the knob extends far enough off the front to give fingers good access on typical cabinet faces while keeping the profile compact for close spaces.

Key Amerock Forgings Cabinet Knob Details

• The 1-1/4 inch (32 mm) diameter head gives a comfortable grip area, which helps users pull heavier cabinet or vanity drawers without slipping off the edge of the knob during everyday use.
• The satin nickel finish on this knob provides a soft metallic look, which supports visual continuity when matching other satin nickel decorative hardware in the same kitchen, bath, or built-in installation.
• The zinc die-cast material creates a dense knob body, which helps the piece feel substantial in hand and maintains the Forgings Collection design details when used across multiple cabinet fronts.
• The knob belongs to the Amerock Forgings Collection, which gives cabinets and vanities a bold, rugged style that suits designs where the hardware is intended to read as a visible design element.
• The Amerock BP4425G10 manufacturer part number precisely identifies this 1-1/4 inch diameter satin nickel Forgings knob, which simplifies reordering the same style for future cabinet additions or replacements.

Amerock Cabinet Knob Fit And Mounting Use

This Amerock Corporation knob uses a single center mounting point sized for a standard cabinet knob screw with 8-32 threading, matching the 8-32 x 1 inch screw size specified for this model. That threading pattern pairs with common cabinet door and drawer front construction, so the knob interfaces cleanly with typical shop drilling setups for decorative hardware. The 1-1/4 inch head diameter and 1-1/8 inch projection balance grip and clearance, which works well on standard face frame and frameless cabinet fronts where users want reliable finger clearance without a long reach. A base diameter of 7/16 inch concentrates the load at the mounting point, which helps the knob sit cleanly over the drilled hole while keeping the footprint modest on narrower rail and stile profiles.

Using The Amerock Forgings Knob In Projects

Where This Satin Nickel Forgings Knob Works

This Amerock Forgings satin nickel knob is categorized under decorative hardware and moldings, knobs, so it fits cabinet and furniture projects where hardware functions as a visible design component. The bold, rugged styling of the Forgings Collection pairs well with kitchens and baths that use pronounced wood grain or textured finishes, because the knob design holds its own visually against those surfaces. With a 1-1/4 inch (32 mm) diameter, the knob suits standard cabinet doors and medium-width drawer fronts that benefit from a grip large enough for repeated daily use. The satin nickel finish coordinates with other satin nickel elements in the space, such as faucets or hinges in the same tone, which helps produce a unified hardware look across doors and drawers. The piece is classified as an Amerock knob, aligning it with other Amerock Corporation decorative hardware in layouts that standardize on a single brand across a job.

Details That Support Repeatable Cabinet Results

The specified diameter of 1-1/4 inch and projection of 1-1/8 inch give predictable dimensions that installers can use when laying out knob locations relative to door and drawer edges, supporting consistent hand clearance across all openings. The 7/16 inch base diameter defines the contact ring on the surface, which helps installers visualize how the knob will sit over the hole and how much flat area is needed on narrow rails to avoid overhang. Because the screw size is called out as 8-32 x 1 inch, shop drawings and drilling operations can be aligned with that hardware size for efficient production runs on multiple fronts. The Amerock BP4425G10 part number ties directly to this satin nickel Forgings knob geometry and finish, which allows project documentation to point to a single, repeatable spec when cabinets are built in phases or matched later.

Common Questions About BP4425G10 Cabinet Use

Selecting This Amerock Knob For Your Project

The Amerock Forgings satin nickel knob, identified as BP4425G10, combines a 1-1/4 inch diameter head, 1-1/8 inch projection, and zinc die-cast construction to support everyday cabinet use. The satin nickel finish and Forgings Collection styling give you a defined visual statement that lines up with other satin nickel hardware on the job. For projects that standardize around Amerock Corporation decorative hardware, this knob provides a clearly defined spec that can be repeated across current and future cabinet runs.