Berenson Hearthstone Series 3-3/4" (96 mm) Center to Center Weathered Verona Bronze Pull, - 4073-1WVB-P

Hearthstone Pull 96mm Center To Center For Cabinets

Hearthstone pull 96mm center to center identifies this Berenson Corporation Hearthstone Series cabinet pull as a 3 inch center to center handle, so it matches standard drill patterns on many cabinet doors and drawers. The zinc die cast material provides a solid metal construction, which supports dependable daily gripping on frequently used fronts. The Verona Bronze finish creates a weathered bronze look, which helps match existing Verona Bronze cabinet hardware in the same space. The 4-13/16 inch length establishes the visual span across the front, helping installers balance proportion on doors and wider drawer fronts. A 1-3/8 inch projection sets the stand-off from the surface, which gives fingers room to grab while keeping the handle close to the face of the cabinet. The 3/8 inch width at the grip keeps the profile slim, which can help maintain a cleaner line on narrow rails and stiles.

Key Hearthstone Pull Details For Cabinet Projects

• The 3 inch center to center mounting dimension aligns the pull with many common 3 inch boring layouts, which simplifies layout when replacing older handles on cabinet doors and drawers.
• The Verona Bronze finish matches the Verona Bronze notation in the description, helping installers coordinate this pull with other Verona Bronze parts on the same job for a consistent appearance.
• The 4-13/16 inch overall length gives this Berenson Hearthstone pull a bit more coverage than the bore span, which can help cover minor surface marks near the mounting holes.
• The 1-3/8 inch projection from the cabinet face provides finger clearance for gripping, which can support comfortable use on both doors and drawer fronts.
• The 3/8 inch width at the grip offers a narrow front profile, which can be useful where a slimmer look is desired on smaller cabinet faces.
• The 13/16 inch base dimension creates a defined footprint at each end, which helps the pull visually anchor against the cabinet surface.

Installation Dimensions And Pull Fit Details

The 3 inch center to center measurement defines the distance between the mounting points, so drill locations can be set or confirmed before running a row of cabinets. With a 4-13/16 inch overall length, the pull extends past the hole centers, which gives a clear reference for aligning the handle parallel to door or drawer edges. The 1-3/8 inch projection establishes the working depth off the face, which affects how far the pull stands out when planning clearances near adjacent doors or appliances. A 3/8 inch width affects how the hand engages the grip, which can matter on tight drawer stacks. The 13/16 inch base dimension at each end defines how much flat surface is required around each hole, helping installers understand how it will sit on narrow rails.

Using The Berenson Hearthstone Pull On Cabinet Jobs

Where This Hearthstone Pull Fits Cabinet Designs

This Berenson Hearthstone Series pull is categorized under Handles and Pulls, Berenson, which positions it as decorative hardware for cabinet doors and drawers. The 3 inch center to center dimension suits layouts built around 3 inch boring, so it fits many traditional cabinet drilling patterns. With an overall length of 4-13/16 inches, the pull visually suits small to mid-size fronts, where a compact handle is appropriate. The Verona Bronze finish ties directly to Verona Bronze cabinet hardware schemes, which matters when trim, hinges, and other visible parts follow the same finish family. Because the pull uses a zinc die cast construction, it provides a metal handle body that supports typical kitchen, bath, and casework use where metal decorative hardware is preferred.

Why Dimensions And Material Support Repeatable Results

The 3 inch center to center spacing gives installers a fixed drilling reference, which simplifies jig setup and helps keep multiple doors and drawers aligned across a run. The 4-13/16 inch length supplies enough bar beyond the hole centers to see edge alignment clearly, which can reduce adjustment time during mounting. A 1-3/8 inch projection defines the stand-off, so cabinet runs planned with this pull maintain consistent clearance where doors meet walls or tall panels. The 3/8 inch grip width and 13/16 inch base size help installers predict how the pull will look on different stile and rail widths, which supports consistent visual balance from cabinet to cabinet. The zinc die cast material gives the pull a uniform, cast-metal structure, which supports repeated fastening across a project where identical hardware is used on many fronts.

Common Questions About The Hearthstone Verona Bronze Pull

Selecting This Hearthstone Pull For Your Next Run

This Berenson Hearthstone Series 3 inch center to center pull in Verona Bronze provides a zinc die cast cabinet handle sized at 4-13/16 inches long with a 1-3/8 inch projection. These defined dimensions and finish details help align hardware selection with your planned cabinet drilling, visual balance, and Verona Bronze hardware scheme across a project.