
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Hearthstone brushed nickel knob is a zinc die cast cabinet knob designed for decorative hardware projects where size and feel must match existing layouts. The knob length of 1-9/16 inches creates a substantial pull point, which helps users get a secure grip on doors or drawers. A width of 1-1/8 inches balances that length, so the hand contacts a consistent surface when pulling from different angles. The projection of 1-1/8 inches spaces the hand away from the cabinet face, which reduces knuckle contact on face frames or doors during regular use. The 13/16-inch base concentrates load at a defined footprint, which helps distribute pulling forces into the cabinet front. The brushed nickel finish provides a muted metallic appearance, which supports projects targeting a contemporary but not highly reflective look across multiple openings.
The Hearthstone cabinet knob length of 1-9/16 inches sets the primary horizontal dimension, which guides layout when centering knobs on rails or drawer fronts. The 1-1/8 inch width defines the vertical footprint, which matters when placing knobs near decorative edges or narrow stiles. A projection of 1-1/8 inches controls stand-off from the cabinet face, which affects both finger clearance and how far the knob extends into adjacent clearances. The 13/16-inch base dimension identifies the area that sits flush to the surface, which helps when working around raised panel profiles. The 8-32 x 1 inch screw specification sets the threaded connection, which aligns with common cabinet drilling practices and supports a predictable mounting depth into doors and drawer fronts.
This Hearthstone Series brushed nickel knob from Berenson Corporation is positioned for use on cabinet doors and drawers where a coordinated decorative hardware look is required. The zinc die cast construction supports installation on standard residential and light commercial cabinetry where a cast knob feel is preferred. The 1-9/16 inch length is suitable for medium-width drawer fronts and typical door rails, allowing the knob to sit centered without crowding nearby details. The 1-1/8 inch width lets the knob fit comfortably on framed and frameless cabinet doors while staying clear of edge profiles. With a projection of 1-1/8 inches, the knob stands off the surface enough for fingers to wrap around the profile, which benefits users opening heavier drawers or tall pantry doors. The 13/16-inch base aligns well with flat panel faces and simple profiles, supporting consistent contact during repeated pulls.
The defined length of 1-9/16 inches allows installers to repeat a standard centerline offset from door and drawer edges, which helps maintain visual alignment across long cabinet runs. The 1-1/8 inch width pairs with that length to form a balanced rectangle, which keeps the knob looking proportional whether mounted vertically or at slight variations dictated by door style. The projection of 1-1/8 inches is long enough to clear typical door thicknesses relative to adjacent fronts, which reduces interference when doors and drawers operate side by side. The 13/16-inch base provides a clear circular footprint that can be used as a visual reference when aligning to routered details or shaker-style frames. The 8-32 x 1 inch screw specification provides a predictable engagement length into the knob, which helps installers drive the fastener to a firm seat without over-adjusting depth. Together, these details support repeatable placement, a consistent hand feel, and streamlined installation across multiple cabinets using the same Hearthstone Series design.
The Hearthstone knob has a length of 1-9/16 inches, width of 1-1/8 inches, projection of 1-1/8 inches, and a 13/16-inch base, which together define its footprint and stand-off on cabinet fronts.
The Berenson Hearthstone knob is made from zinc die cast, which provides a solid cast body that supports a firm feel when mounted on cabinet doors or drawers.
This Hearthstone Series knob has a brushed nickel finish, which offers a muted metallic surface that supports contemporary cabinet designs and helps soften reflected light.
The knob uses an 8-32 x 1 inch screw, giving a common machine thread and length that aligns with standard cabinet drilling and mounting thicknesses.
The 1-1/8 inch projection sets how far the knob stands off the surface, providing finger clearance and helping reduce hand contact with the cabinet face during pulls.
The 4083-1BPN-P manufacturer part number identifies this specific Hearthstone Series zinc die cast knob in brushed nickel, supporting consistent reordering for matching installations.
This Berenson Hearthstone Series brushed nickel knob combines defined dimensions with a zinc die cast body, which supports consistent installation across doors and drawers. The stated length, width, projection, base size, and 8-32 x 1 inch screw specification give clear mounting and layout parameters. For projects needing a coordinated decorative hardware look in brushed nickel, this knob provides a repeatable solution that ties multiple cabinet openings together. Use these verified measurements and finish details to align this Hearthstone knob with your cabinet fronts and overall hardware plan.
Sold In: 1 Each