Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Hearthstone knob describes a zinc die cast cabinet knob in the Hearthstone collection from Berenson Corporation, so installers get a defined look that matches other Hearthstone decorative hardware on a job. The matte black finish provides a dark, non-reflective surface, which helps create consistent visual contrast on cabinet doors and drawer fronts. The knob length of 1-9/16 inches, or 40 mm, sets a clear gripping span that feels substantial on residential or commercial cabinetry. A projection of 1-1/8 inches positions the hand away from the door surface, helping reduce fingerprints and contact on finished faces during use. The 1-1/8 inch width balances the 1-9/16 inch length, giving the knob a proportion that suits standard cabinet rail and stile dimensions. A 13/16 inch base defines the footprint against the wood, which helps with layout when lining up multiple knobs across doors and drawers.
The knob uses an 8-32 screw size, which aligns with common cabinet drilling and thread patterns in the woodworking industry. This matters when swapping out existing knobs on pre-drilled doors, because the installer can rely on a familiar thread standard. The specified screw length of 1 inch indicates the knob is designed to mount through typical cabinet door or drawer front thicknesses, supporting straightforward installation. With a projection of 1-1/8 inches, the knob stands off the surface enough to clear typical door profiles, which helps hands avoid rubbing molded edges. The 13/16 inch base dimension gives a clear reference for centering on rails or stile widths, aiding accurate layout on face frame or frameless cabinet constructions.
The Berenson Hearthstone knob, classified under decorative hardware and moldings in the knobs category, is oriented to cabinet and furniture applications where a single-hole knob is standard. Its 1-9/16 inch length makes it well suited for both doors and smaller drawers that benefit from a defined gripping surface. The matte black finish ties into designs that call for a modern or transitional look using dark hardware against painted or stained woodwork. Because the projection is 1-1/8 inches, the knob provides enough clearance for fingers on typical kitchen, bath, or office cabinetry. The 13/16 inch base works visually on common rail heights and drawer faces, giving a footprint that looks balanced rather than oversized or undersized in most residential cabinet layouts.
The zinc die cast construction provides a stable metal body, which helps the knob hold its shape under repeated daily pulling loads on frequently used doors. The 1-1/8 inch projection establishes a consistent distance from the cabinet face, which supports even alignment when this knob is repeated across long runs of doors or drawer banks. The 1-9/16 inch overall length and 1-1/8 inch width give the installer predictable coverage over the drilled mounting point, helping conceal slight variances in hole placement during retrofit work. The matte black finish offers a uniform color tone over the knob surface, supporting visual consistency when multiple Hearthstone knobs are specified throughout a project. Using the defined 4086-1055-P part number across a plan keeps every installed knob matching in size, finish, and material, which reduces variation between different areas of the same job.
The Berenson 4086-1055-P knob has a length of 1-9/16 inches, a width of 1-1/8 inches, a projection of 1-1/8 inches, and a base measuring 13/16 inch for cabinet contact.
The 1-1/8 inch projection holds the knob away from the door surface, giving fingers room to pull and helping reduce contact with the cabinet finish during everyday operation.
The Hearthstone matte black knob is zinc die cast, providing a solid metal body that supports repeat pulling loads on cabinet doors and drawers in regular service.
This cabinet knob uses an 8-32 screw size, aligning with common cabinet hardware threads so it fits typical drilled holes on many doors and drawer fronts.
The matte black finish gives a low-sheen dark look, creating defined contrast on lighter cabinets or a uniform tone on dark casework across the installation.
The Hearthstone collection designation means this knob belongs to Berenson's Hearthstone line, helping designers coordinate matching hardware styles within a single project.
The Hearthstone matte black zinc die cast knob from Berenson Corporation combines a 1-9/16 inch length, 1-1/8 inch width, and 1-1/8 inch projection with a 13/16 inch base, giving installers defined dimensions for layout work. The 8-32 screw interface and 1 inch screw length align with common cabinet construction, helping streamline drilling and fastening steps on doors and drawers. With its specific 4086-1055-P part number and Hearthstone collection identity, this knob supports consistent hardware selection across multiple rooms or phases of a project.
Sold In: 1 Each
