Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Knape and Vogt TSC series pullout puts two covered waste bins behind a base cabinet door, sliding out from a top-mount position on soft-close slides for controlled, quiet travel in both directions.
Running separate containers for trash and recycling is common in most kitchens, but managing two freestanding bins takes up floor space and breaks the clean line of a finished kitchen. This pullout solves both problems by housing two full-size 35 quart bins inside a single base cabinet opening. One pull of the door brings both bins forward together, so sorting happens at the counter without hunting for the right can. The top-mount design means the carriage hangs from the cabinet's upper rail, leaving the cabinet floor unobstructed and the bins riding at a height that is easy to access without bending low.
The carriage is finished in Birch, a neutral tone that reads cleanly inside painted or natural wood cabinetry. Both bins are white and are sized at 35 quarts each, large enough for daily household or light commercial use without requiring constant emptying. The soft-close slide mechanism handles the return trip: once the door swings shut, the slides take over and draw the carriage closed with a controlled, dampened motion. At 100 pounds of rated capacity, the system carries two full bins without putting stress on the hardware or causing the unit to drift when stationary.
This unit is sized for a cabinet opening that is 17-1/2 inches wide, at least 18 inches tall, and a minimum of 23-3/8 inches deep. That profile suits a standard 18-inch base cabinet in most kitchen runs, or a wider bay where the cabinet is dedicated to waste management. It is a practical choice for kitchen remodels, new cabinet installations, and cabinet shops building out kitchen packages that specify integrated waste sorting. The door-mount hardware means it can be tied directly to the cabinet door so the bins travel with the door rather than requiring a separate pull. Measure the available opening in all three dimensions against the minimum requirements before specifying.
A top-mount unit suspends the carriage from the cabinet's upper frame rail, keeping the cabinet floor clear. A bottom-mount unit rides on slides fixed to the cabinet floor. Top-mount is often preferred when the cabinet base has plumbing, irregularities, or when access height is a priority.
The unit ships with two 35 quart white bins. Confirm lid inclusion from the product listing; if lids are needed separately, they are available as accessories.
The unit is door-mount ready. Check the product listing to confirm whether the door-mount bracket ships in the box or is a separately ordered component for this configuration.
Yes. The two-bin configuration is well suited to running one bin for general waste and one for recyclables, both accessible in a single pull.
Choose this pullout to replace two freestanding bins with a single, quiet, door-mounted system that keeps trash and recycling sorted and out of sight in a standard base cabinet.
Sold In: 1 Each
