Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The MuV+ Metal Rear Mounting Bracket is the required rear support for Knape & Vogt MuV+ undermount drawer slides sized 14 inches and up, enabling installation in face-frame cabinets where the slide's back end needs a fixed anchor point at the cabinet rear.
Undermount slides in frameless cabinets screw directly to the flat interior side panel from front to back. In a face-frame cabinet, the side panel is set back behind the frame, leaving the back end of the slide without a solid mounting surface unless a rear bracket is added. This bracket closes that gap: it fastens to the rear wall or panel of the cabinet and gives the slide's back end the support it needs to carry the drawer reliably through its full travel. Skipping the rear bracket in a face-frame install is the most common reason MuV+ undermount slides underperform or fail to seat correctly.
The bracket is metal construction — the same material class as the MuV+ slide members themselves — which keeps the rear mount rigid under the drawer's dynamic load rather than flexing as a plastic bracket might over time. Screw-on attachment means no special tooling or press equipment is needed at installation, and the fastener points are accessible from inside the cabinet during a standard fit-out. The non-handed geometry means you stock one bracket part number and use it on both sides of the opening.
Cabinet shops and installers working with face-frame construction and MuV+ undermount slides will need this bracket for every drawer opening on slides 14 inches and longer. It is also the right pick for retrofit installations where an existing face-frame cabinet is being upgraded to undermount hardware. Frameless cabinet builds typically do not require a rear bracket, since the slide mounts directly to the full-depth side panel. If you are unsure whether your cabinet calls for rear support, the presence of a solid wood face frame on the cabinet front is the indicator.
Because this bracket is non-handed, you need two brackets per drawer opening — one to support the left slide and one to support the right. The bracket works on either side, so you order two of the same part number.
This bracket is designed for the MuV+ series specifically. Rear mounting brackets are engineered per series and are not interchangeable across Knape & Vogt undermount lines or with other brands.
Yes. This bracket is for MuV+ slides 14 inches and longer. Shorter slides in the MuV+ program may use a different rear support or none at all; match the bracket to the slide length you are installing.
Confirm included fasteners at the time of order. The bracket's screw-on mount type means standard wood screws are the attachment method, but verify what ships with the bracket before your install day.
Getting the rear of a MuV+ undermount slide anchored properly in a face-frame cabinet is the step that separates a drawer that runs true from one that binds or loosens over time — and this bracket is the part that makes it happen.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 8 Each |  KVMUV-RBP Mfr# MUV-RBP | KV MuV+ 8-Pack 2" Rear Mounting Bracket, Left Hand/Right Hand, Blue, MUV-RBP |
Sold In: 12 Each
