Plywood Hardwood Veneer Core, Domestic Maple, White, Plain Sliced, Unfinished 3/4" Thickness, 48.5 x 120, Grade A-1

3/4 Inch Maple Plywood For Cabinet Projects

3/4 inch maple plywood from States Industries is a hardwood veneer core plywood panel designed for woodworking where a maple face is required. The A-1 grade white maple face provides a clean, furniture-grade appearance, which supports visible cabinet and fixture work where a consistent look matters. The panel measures 48.5 x 120 inches, so it spans long cabinet runs or tall panels with fewer seams in the layout. The veneer core construction creates a plywood structure intended for woodworking applications classified under plywood hardwoods. The plain sliced maple veneer face presents the characteristic cathedral and straight grain typical of this cut, giving design flexibility for matching across doors and panels. The unfinished surface allows finishing systems to be selected and applied according to the shop standard, which supports consistent color and sheen across an entire job.

Key Maple Plywood Details For Wood Shops

• The 3/4 inch thickness suits cabinet carcasses, shelving, and partitions where a standard plywood build is used, helping keep material choices consistent across multiple projects.
• The 48.5 x 120 inch panel size covers large casework sides, tall closet panels, or wide runs with fewer joints, which can simplify layout and reduce seam alignment work.
• The A-1 grade white maple face is intended for primary visible surfaces, supporting applications where a clean, high-appearance face is required on doors, ends, and frames.
• The hardwood veneer core construction places this panel in the plywood hardwoods category, aligning it with typical machining, boring, and edge-treating workflows in cabinet shops.
• The plain sliced maple face presents the grain pattern expected of this cut, allowing designers and builders to plan grain direction and panel orientation for consistent visual results.
• The unfinished maple surface accepts shop-applied coatings, so finish systems can be matched with other components in the project for uniform appearance.

Maple Plywood Format And Shop Handling

This States Industries maple plywood panel uses a veneer core plywood construction within the plywood hardwoods, domestic and import category, which fits common cabinet and millwork processes. The 3/4 inch thickness aligns with standard shelf and cabinet case dimensions, so cutting diagrams can follow familiar patterns. The 48.5 x 120 inch size gives slightly more width than a nominal 4-foot sheet, offering some margin for trimming to final dimension while maintaining full-size components. The A-1 grade white maple face is oriented for use where appearance is important, while the panel remains unfinished so sanding, edging, and finishing steps can be integrated into established shop sequences. The manufacturer part number 5870/702836 and SAP description WHITE MAPLE,PS,A1,3/4X48X120,VC NAUF clearly identify this specific configuration for repeat orders.

Using This Veneer Core Maple Plywood In Work

Where This Domestic Maple Plywood Fits Best

This plywood hardwood veneer core, domestic maple, white and plain sliced, is positioned for interior woodworking where a maple face is desired. The A-1 grade face is suited to exposed cabinet ends, door panels, and drawer fronts where a consistent surface quality is important in the finished installation. Because it is unfinished, the panel can be integrated into jobs that require custom stain or clear finishes on maple, allowing the same sheet to serve in both casework and matching front components. The 48.5 x 120 inch format supports tall pantry cabinets, wardrobe sides, or other oversized pieces that benefit from a single continuous sheet, which can help maintain uninterrupted grain flow from top to bottom.

Details That Support Repeatable Maple Panel Results

The veneer core construction of this States Industries panel places it within standard plywood machining expectations, so cutting, routing, and boring operations can be planned alongside other hardwood plywoods in the shop. The plain sliced maple face provides predictable grain orientation, which helps when laying out doors or panels that need balanced appearance across a bank of cabinets. The A-1 grade designation on the white maple face signals a high-face standard that supports repeatable visual quality from sheet to sheet on a project. With its 3/4 inch thickness, the panel matches common cabinet engineering, so hardware locations and interior clearances can stay aligned with existing jigs. The clearly defined product identity, from the 5870/702836 part number to the WHITE MAPLE,PS,A1,3/4X48X120,VC NAUF description, helps shops reorder the same sheet for future jobs that must match earlier work.

Common Questions About A1 White Maple Plywood

Select This Maple Plywood For Matching Jobs

This States Industries 3/4 inch A-1 white maple plywood with hardwood veneer core provides a defined, repeatable panel choice for cabinet and millwork projects. The 48.5 x 120 inch unfinished plain sliced maple face supports both casework and visible surfaces under a single specification. The documented identity, from the domestic maple description to the 5870/702836 number, gives shops a clear reference point when aligning multiple jobs to the same material standard. For work that relies on a consistent white maple face across cabinets, fixtures, or built-ins, this panel offers a specific, traceable option.