Berenson Tempo Series 10-1/16" (256 mm) Center to Center Verona Bronze Pull, - 0809-20VB-P
Description
Berenson Tempo Pull 256mm Center To Center Use
Berenson Tempo pull 256mm center to center gives cabinets a straight bar grip that works well on doors and drawers where a consistent handhold helps daily use. The Tempo Series identity ties this pull to a coordinated line, so matching other areas of a project is straightforward when using the same collection. The LUXE Bar Pulls collection designation signals a bar-style profile that suits modern and transitional layouts. Steel construction provides a solid-feeling handle during opening and closing, which supports repeated use in active kitchens or work areas. The Verona Bronze finish with highlights adds visual depth on the bar and posts, so the pull reads clearly against many door and drawer finishes. The 10-1/16 inch stated center to center equals the 256 mm drilling distance, which matters when laying out or replacing long pulls across multiple fronts.
Tempo Bar Pull Details That Support Projects
- The steel material creates a rigid bar pull that resists flex during pulling, helping doors and drawers track on their hardware without twisting the front.
- The bronze finish with highlights provides contrast and visual break points along the pull, helping installers align the handle visually with door rails and drawer fronts.
- The 256 mm center to center dimension sets the exact hole spacing, simplifying jig setup and repeat drilling across banks of fronts for consistent alignment.
- The 12-7/16 inch overall length gives extra bar beyond the mounting points, giving users a wider grip area and making tall or wide fronts easier to operate from different positions.
- The 1-3/8 inch projection brings the bar out from the door or drawer face, creating finger clearance between the hand and the surface during pulls.
- The 1/2 inch width keeps the bar slim while still offering a full contact area, which helps balance a clean line with a comfortable pinch or wrap grip.
Cabinet Pull Mounting And Size Planning
This Tempo Series pull uses a 256 mm center to center layout, so hole placement follows that fixed spread when marking cabinet fronts. The 10-1/16 inch drilling dimension relates directly to the metric spacing, which supports planning across mixed measuring systems on a job. A 12-7/16 inch overall length means the bar extends past the mounting posts on each side, which affects how close the pull can sit to adjacent doors, panels, or wall edges. With a 1-3/8 inch projection, the pull stands off the surface far enough that fingers can wrap behind the bar, which helps on heavier fronts. The 1/2 inch width defines the bar profile installers see from the face, helping coordinate with rail heights and stile widths.
Using This Verona Bronze Tempo Pull On Projects
Where This Berenson Tempo Pull Works Well
This Berenson Tempo bar pull from the LUXE Bar Pulls collection fits projects that call for a straight bar handle in a Verona Bronze tone. The 256 mm center to center dimension makes it suitable for wider drawers or taller doors where a longer pull supports even force during opening. Its 12-7/16 inch overall length helps span larger drawer fronts, giving users multiple hand positions along the same handle. The 1-3/8 inch projection positions the bar away from the door or drawer face, which is helpful on thicker fronts that still need comfortable finger clearance behind the grip. With a 1/2 inch width, the pull appears lean from the front, so it works on both narrow and wide rails without visually overpowering the panel.
Details That Support Repeatable Pull Layouts
The fixed 256 mm center to center spacing lets installers standardize drilling patterns across a run of cabinets, which helps keep reveals and handle lines consistent from unit to unit. Because 10-1/16 inch center to center is also provided, layout can be referenced in inches or millimeters without doing on-site conversions. The overall 12-7/16 inch length defines end clearances when pulls sit near appliance panels or wall returns, which assists in checking that handles do not conflict with adjacent surfaces. The 1-3/8 inch projection defines how far the pull stands off the face, which matters for fronts that open near trim or side panels so that hands have room between components. Steel construction gives the bar a solid feel during installation and tightening, which supports stable alignment when pulls are set across multiple fronts in a row.
Common Questions About This Tempo Series Pull
What are the exact mounting hole centers on this pull?
This pull has a 256 mm center to center measurement, also described as 10-1/16 inch, which sets the exact spacing between the two mounting holes on the cabinet front.
How long is the Berenson 0809-20VB-P bar pull overall?
The Berenson 0809-20VB-P bar pull has an overall length of 12-7/16 inch, so the bar extends beyond the mounting posts to give a wider gripping area on doors and drawers.
What projection does this Verona Bronze Tempo pull provide?
This Verona Bronze Tempo pull has a 1-3/8 inch projection, positioning the bar away from the cabinet face so fingers can comfortably wrap behind it during operation.
What material is used for this LUXE Bar Pulls handle?
This handle is made from steel, which provides a solid, rigid bar that supports repeated pulling on active cabinet doors and drawers in regular use.
How wide is the face of this cabinet pull?
The face of this cabinet pull is 1/2 inch wide, giving a slim visual line while still offering enough surface area for a comfortable grip on doors and drawers.
Which finish does this Tempo Series cabinet pull have?
This Tempo Series cabinet pull has a Bronze with Highlights finish, adding depth and contrast across the bar and posts for a defined look on cabinet fronts.
Selecting This Pull For Cabinet Install Jobs
The Berenson Tempo pull 256mm center to center offers a defined drilling pattern, steel construction, and a Verona Bronze finish with highlights, which together support consistent cabinet layouts. The 12-7/16 inch length and 1-3/8 inch projection give workable proportions for wider drawers and taller doors. Using the 256 mm center to center dimension when planning runs helps line up hardware visually across a project. For jobs needing a straight bar handle from the LUXE Bar Pulls collection, this Tempo Series piece provides the documented sizes and finish to align with design and layout requirements.