Berenson Tempo Series 12-5/8" (320 mm) Center to Center Brushed Nickel Pull, - 0810-2BPN-P
Description
TEMPO PULL 320MM CC BRSH NKL For Cabinet Runs
TEMPO PULL 320MM CC BRSH NKL identifies this Berenson Tempo Series bar pull as a 320 mm center to center handle, so it spans wider cabinet fronts for long drawer and door faces. The 15 inch overall length provides a substantial gripping area, which helps on tall pantry doors or wide pots-and-pans drawers. The pull is part of the LUXE Bar Pulls collection, tying into a coordinated modern hardware look across a project. Its brushed nickel finish softens reflections, which reduces visible fingerprints in everyday use. The pull is made from steel, giving the handle a solid feel when operating heavier fronts. A 1/2 inch width presents a slim bar profile, which maintains a clean line on contemporary cabinets. The 1-1/4 inch projection holds the hand away from the door surface, which supports comfortable, repeatable operation.
Key LUXE Bar Pulls Details For Projects
- The 320 mm center to center dimension sets consistent drilling for wide cabinet layouts, which speeds up jig setup and repeat boring on multiple fronts.
- The 15 inch length or diameter measurement aligns the pull visually with taller doors, which helps maintain proportion across stacked drawer banks and pantry sections.
- The brushed nickel finish provides a muted metallic surface, which pairs well with many appliance and hinge finishes on kitchen or bath installs.
- The steel material construction gives the pull a solid bar feel, which supports daily operation on frequently used doors and drawers.
- The 1-1/4 inch projection creates clearance between the hand and the cabinet face, which helps when users grip from the side on tight installations.
- The 1/2 inch width defines a narrow bar profile, which keeps the hardware visually light on frameless or slab-style fronts.
Installation Layout For This 320 mm Pull
The 320 mm center to center specification sets the exact hole spacing for this Berenson 0810-2BPN-P pull, which lets installers match drilling patterns across multiple cabinets. This spacing works well on wider drawer fronts, so the handle covers more of the face visually. The 1-1/4 inch projection influences how far the pull stands off the door, which matters when planning for door swing near walls or adjacent cabinets. With a 15 inch overall length, the pull often positions near the outer thirds of a wide drawer, which can balance the load when opened. The brushed nickel LUXE Bar Pulls finish ties into other decorative hardware elements, which helps create a unified layout in kitchens, baths, or built-ins.
Using This Berenson Tempo Bar Pull In Work
Where This 320 mm Center Pull Fits Best
The 320 mm center to center Berenson Tempo 320mm pull is suited to wide cabinet drawers and doors, because the long mounting spread supports a broad grip area. On taller pantry or closet doors, the 15 inch length gives users multiple hand positions, which can improve leverage along the door edge. Within the LUXE Bar Pulls collection, this brushed nickel cabinet handle aligns with other sizes and configurations, which simplifies hardware selection on multi-room projects. The brushed nickel finish works with many decorative hardware and appliance finishes, so it can be specified for kitchens, baths, or utility cabinetry without changing the basic pull style. The 1/2 inch width keeps the profile slim, which fits modern frameless or slab-door installations where a minimal look is preferred.
Details That Support Straightforward Alignment Work
The TEMPO PULL 320MM CC BRSH NKL center to center dimension lets installers base drilling jigs on a repeatable 320 mm layout, which is useful when boring a series of wide drawer fronts in a shop or on site. The 15 inch bar length provides clear visual reference at the door edge, which can help align the pull parallel to cabinet reveals during installation. With a 1-1/4 inch projection, the handle stands off the face enough to clear typical door and drawer front thicknesses, which supports a solid hand grip from above or below. The steel material gives the bar a steady feel when tightened against the cabinet face, which helps maintain alignment over time in regular residential use. The brushed nickel surface reduces harsh reflections under task lighting, which can make layout lines and final positioning easier to read during mounting.
Common Questions About This Brushed Nickel Pull
What is the center to center size on this pull?
The Berenson 0810-2BPN-P pull has a 320 mm center to center size, which sets the drilling distance between mounting holes for consistent cabinet layouts.
How long is the Berenson Tempo Series pull overall?
The pull has a 15 inch length, which suits wider drawers and taller doors where a longer bar supports a comfortable, full-hand grip.
What material is this LUXE Bar Pulls handle made from?
The LUXE Bar Pulls 0810-2BPN-P pull is made from steel, giving a solid-feeling handle for everyday door and drawer operation.
What finish does the 0810-2BPN-P pull have?
The 0810-2BPN-P pull has a brushed nickel finish, which offers a muted metallic look that works with many cabinet and appliance styles.
How far does this cabinet pull project from the door?
The pull projects 1-1/4 inches from the cabinet surface, giving hand clearance for gripping from above, below, or the side.
How wide is the bar on this cabinet handle?
The bar on this cabinet handle is 1/2 inch wide, creating a slim profile that suits contemporary cabinet designs.
Select This 320 mm Pull For Coordinated Runs
This Tempo brushed nickel bar pull matches a 320 mm center to center layout, so it fits wide cabinet applications needing a long handle. The 15 inch length, 1-1/4 inch projection, and steel construction give it practical reach and solid feel. The brushed nickel LUXE Bar Pulls finish keeps the look consistent across kitchens, baths, or built-ins. For projects using Berenson decorative hardware, this 0810-2BPN-P model offers a straightforward option when a long 320 mm center pull is required.