Lahara Tissue Holder Venetian Bronze For Baths

Lahara tissue holder Venetian Bronze is a bath hardware piece from the Lahara collection designed to hold a toilet paper roll in a bathroom installation. The Venetian Bronze finish provides a specific dark, warm look that coordinates with matching Lahara bath hardware in the same finish. The holder length of 8-3/4 inches gives the bar enough span to support a standard toilet paper roll while leaving working room around the fixture during cleaning or replacement. A projection of 3-3/4 inches positions the roll away from the wall face, which helps the paper rotate freely without rubbing the surface behind it. The 2 inch base diameter on each side creates a defined mounting footprint on the wall surface, which helps the escutcheons visually cover the mounting area. The tissue holder is made from zinc die cast material, which provides a rigid body for daily bathroom use.

Key Lahara Toilet Paper Holder Details

• The 6-1/4 inch center to center dimension between mounting points establishes the spacing needed when laying out mounting locations, which helps installers mark and drill consistently across multiple bathrooms.
• The overall 8-3/4 inch length offers extra bar extension beyond the 6-1/4 inch centers, which helps the holder span the mounts cleanly and present a balanced look on the wall surface.
• The 3-3/4 inch projection defines how far the bar sits out into the room, which helps installers plan clearances relative to nearby cabinetry, trim, or other bath hardware.
• The 2 inch base diameter at each end creates a round contact area against the wall, which helps cover typical drill margins around the mounting points for a clean finished appearance.
• The zinc die cast construction forms a solid one-piece bath hardware body, which helps the holder maintain its shape under normal use in a residential or light commercial bathroom.

Mounting And Layout Details For Installers

The 6-1/4 inch center to center mounting measurement is the critical layout detail when positioning this Lahara tissue holder on a bathroom wall. This dimension defines the distance between the two attachment points, which helps installers transfer consistent measurements from drawings or templates directly onto finished wall surfaces. The 3-3/4 inch projection describes how far the holder extends out from the wall, which helps with planning relative to trim, vanity sides, or adjacent fixtures in tight bath layouts. Each mounting base at 2 inches in diameter covers the immediate area around the fastener locations, which supports a finished look after drilling into materials such as drywall or tile. The overall length of 8-3/4 inches ties these measurements together, which helps installers visualize the final footprint of the holder during layout.

Using This Lahara Holder In Bath Projects

Where This Lahara Tissue Holder Works Best

This Lahara tissue holder belongs to the Lahara collection, which positions it for bathrooms where the other Lahara pieces in Venetian Bronze are specified. The Venetian Bronze finish provides a coordinated appearance when the tissue holder is installed near matching bath hardware such as towel bars or robe hooks from the same collection. As a bath hardware item in the Builders Hardware and Bath Hardware categories, it fits typical residential or light commercial bathroom projects where a fixed wall-mounted toilet paper location is planned. The 3-3/4 inch projection out from the wall supports use next to toilets installed close to sidewalls, because the bar extends the roll into easier reach while keeping it off the wall surface. The 8-3/4 inch length and 6-1/4 inch center spacing also suit standard toilet spaces where a conventional horizontal tissue bar is desired.

Why The Dimensions Support Repeatable Results

The specific 6-1/4 inch center to center spacing on this Lahara toilet paper holder 73850-RB gives installers a repeatable measurement that can be used across multiple units in a project, which helps maintain uniform placement heights and offsets along a wall line. The 2 inch base diameter on each side provides defined coverage around the mounting points, which helps conceal slight variations in drill placement when working across different wall substrates. The 3-3/4 inch projection is a fixed dimension from the wall face to the bar, which helps designers and installers coordinate clearances to toilet tanks, grab bars, or casework edges without field guessing. The overall 8-3/4 inch length also serves as a visual guide during layout, which helps align the holder proportionally with nearby bath hardware on the same wall. Because the holder is made from zinc die cast material, it keeps these dimensions stable over time, which supports consistent alignment with adjacent fixtures after installation.

Common Questions About Lahara Tissue Holder Use

Selecting This Lahara Holder For Your Project

The Lahara tissue holder Venetian Bronze pairs a defined 6-1/4 inch center spacing with an 8-3/4 inch overall length, which suits standard toilet locations needing a horizontal roll mount. The 3-3/4 inch projection and 2 inch base diameters give clear layout dimensions, which support straightforward installation in bath projects planned around the Lahara collection in Venetian Bronze. For jobs specifying Liberty Hardware Lahara bath hardware in this finish, this tissue holder aligns with the collection details and dimensions so the toilet paper location matches the rest of the bathroom hardware layout.