Sugatsune SN Series tab pull SN-50/M
Description
Sugatsune SN Series Tab Pull For Clean Modern Grips
Sugatsune SN Series tab pull is a compact stainless steel pull that provides a clean gripping point on cabinet or furniture edges using a 1-3/16 inch (30 mm) center to center hole pattern, which helps align with standard narrow drawer or door layouts. The mirror stainless steel finish creates a bright, reflective surface that visually matches other polished stainless components in a run of cabinets. Stainless steel 304 material gives solid metal construction, which supports repeated daily use on frequently opened doors and drawers. The 2 inch length provides a short, discreet profile across the edge, which suits tight fronts or minimal designs while still giving fingers enough purchase. An 11/16 inch projection brings the pull slightly off the surface, which allows a comfortable fingertip grip without standing too far into working space. The SN Series identity ties this pull to a coordinated Sugatsune family, which supports consistent styling across multiple cabinet locations.
Key Stainless Edge Pull Details For Projects
- The 1-3/16 inch (30 mm) center to center dimension sets the mounting hole spacing, which matters when laying out drilling jigs or matching an existing small-footprint pattern on cabinet faces.
- The 2 inch length defines the tab width along the door or drawer edge, which helps plan pull placement on narrow fronts and keeps the hardware visually proportional to smaller panels.
- The 11/16 inch projection measures how far the pull stands off the surface, which affects how easily fingers can grab behind the edge while limiting interference with adjacent doors.
- The mirror stainless steel finish provides a reflective appearance, which lets this pull coordinate with polished stainless appliances or hinges for a unified look.
- The stainless steel 304 material establishes a metal construction, which supports use in busy kitchen or shop cabinetry where pulls see frequent handling.
Edge Pull Installation And Layout Considerations
The 1-3/16 inch (30 mm) center to center spacing sets the exact distance between mounting points, which simplifies marking and drilling through cabinet fronts for consistent pull alignment. The 2 inch overall length defines the footprint along the edge, which helps position the pull so it clears frame reveals and neighboring hardware. An 11/16 inch projection determines stand-off from the surface, which influences clearance when doors swing past adjacent fronts. The stainless steel 304 construction provides a stable base for threaded fasteners using the specified M4 thread size, which helps achieve a snug, repeatable fit when tightening from the back side of the door or drawer.
Using The SN-50/M Tab Pull In Cabinet Work
Where This 30 mm Center Pull Fits Best
The 30 mm center to center measurement on the SN-50/M matches a compact mounting pattern, which suits smaller cabinet doors, drawer fronts, or panel edges where space between hardware is tight. The 2 inch length along the edge supports installation on narrow rails or slim drawer faces, helping place a functional grip without crowding stiles or adjacent pulls. Its mirror stainless steel finish aligns visually with stainless hinges, appliances, or toe-kick details, which is useful when building contemporary kitchens or casework that rely on continuous metal accents. Being part of the SN Series gives this pull a defined style family, which helps keep a uniform look when repeating the same pull across upper cabinets, base cabinets, and utility doors.
Details That Support Consistent Alignment And Grip
The precise 1-3/16 inch (30 mm) center to center dimension on this Sugatsune SN Series tab pull allows installers to rely on fixed-distance drilling templates, which reduces layout time across multiple fronts and helps keep pulls visually in line. The 11/16 inch projection controls how far the pull stands proud of the door, which balances grip comfort with the need to keep hardware from catching on clothing or nearby sliding trays. Its stainless steel 304 material provides a solid metal feel when opening doors, which adds a sense of firmness to the user when pulling heavier drawers or loaded cabinet fronts. The mirror stainless steel finish reflects light along the edge, which can make pull locations easier to spot on plain fronts while tying into other polished stainless components.
Common Questions About The SN-50/M Tab Pull
What is the center to center size on the SN-50/M?
The SN-50/M tab pull has a 1-3/16 inch (30 mm) center to center dimension, which sets the mounting hole spacing for drilling and aligning multiple pulls.
How long is this Sugatsune SN Series tab pull?
The Sugatsune SN Series SN-50/M tab pull is 2 inches long, which keeps the pull compact across the cabinet edge while still providing usable grip area.
What is the projection of the SN-50/M pull?
The SN-50/M pull projects 11/16 inch from the surface, which provides finger clearance for gripping without extending far into walkways or workspace.
What material is the SN-50/M tab pull made from?
The SN-50/M tab pull is made from stainless steel 304, which gives a solid metal body suited to frequent opening and closing of doors and drawers.
What finish does this stainless steel edge pull have?
The edge pull has a mirror stainless steel finish, which delivers a reflective look that coordinates with polished stainless components on cabinets.
What screw thread size is specified for the SN-50/M?
The SN-50/M specifies M4 threads with a 1 inch length, which guides selection of matching machine screws for mounting through cabinet fronts.
Selecting This Mirror Stainless Pull For Your Run
This SN-50/M mirror stainless steel tab pull from the Sugatsune SN Series combines a 1-3/16 inch (30 mm) center to center layout, 2 inch length, and 11/16 inch projection, which together support compact, consistent gripping points across cabinet or furniture projects. Choose this pull when a stainless steel 304 body with a bright mirror finish matches your hinge, appliance, or trim selection and when a short, precise mounting pattern fits your door and drawer design.