Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SN-95/M is a rectangular tab pull from the SN series, designed for cabinet doors and drawer fronts where a low-profile grip in a refined stainless finish is the right fit.
The 2-9/16 inch center-to-center puts this pull in a practical middle range. It is larger than the compact 30 mm and 46 mm sizes in the SN series, which suit very narrow fronts and minimal edge-grip applications, and smaller than the 90 mm and 114 mm versions built for wider drawer banks. At this spacing, the pull works comfortably on mid-width drawers, small door fronts, and upper cabinet doors where the grip should feel substantial without dominating the front. Because it mounts on two holes set 65 mm apart, it also drops onto a number of existing hole patterns drilled for that spacing, which makes it a straightforward hardware refresh on a cabinet run already at this center-to-center.
The pull is fabricated from 304 stainless steel, a grade widely used in architectural and kitchen hardware for its resistance to surface corrosion in normal indoor environments. The Mirror Stainless Steel finish is a high-polish surface that reflects evenly across the rectangular face, giving the pull a bright, precise look distinct from the softer appearance of a brushed or satin stainless. On light cabinetry it reads as a highlight; on dark fronts it provides clean contrast. The finish stays consistent across the SN series, so pulls of different sizes in this family share the same reflective character.
This pull fits naturally into contemporary kitchens, baths, and built-in programs where the hardware should be flat, geometric, and finished in a neutral metal. Kitchen designers specifying a uniform stainless program across mixed drawer widths will find the SN series step sizes useful: this 65 mm version handles the mid-range fronts while the other sizes in the series cover the rest of the run. For cabinet shops building contemporary flat-front work, the low 11/16 inch projection keeps the pull close to the face and avoids projecting into adjacent workspace. The Mirror Stainless finish also coordinates naturally with stainless appliances and fixtures already present in most modern kitchens.
The SN series is offered at several center-to-center spacings. This one at 2-9/16 inches (65 mm) is the mid-range option, larger than the compact 30 mm and 46 mm sizes and smaller than the 90 mm and 114 mm versions, so it suits fronts that fall between those extremes.
No. Mirror Stainless Steel is a high-polish surface with a bright, reflective appearance. Brushed and satin finishes have a directional grain that reduces reflectivity and shows a softer sheen.
304 stainless steel performs well in dry indoor environments including kitchens. It is not rated for marine or coastal exterior applications in this product's source data, so keep it to interior use.
The projection is 11/16 inch (17 mm), so the grip stands just under three-quarters of an inch off the face of the front.
The SN-95/M delivers a mirror-polished stainless tab pull at a center-to-center spacing that fits the mid-width drawers and doors most cabinetry programs include in quantity.
