Schaub Siena knob describes a zinc die cast cabinet knob from Schaub and Company that uses the Siena collection design and a Vibra Nickel finish, so it gives a coordinated look wherever that specific style is needed. The 3/4 inch width creates a compact oval grip that stays within tight rail and stile layouts on doors or drawers. The 1-3/8 inch length defines the overall footprint on the front of the panel, helping lay out consistent centerlines across a run. A 1-1/8 inch projection sets how far the knob stands off the face, which affects hand clearance while controlling how much the hardware protrudes into walkways. The 8-32 x 1 inch screw size matches a common cabinet thread standard, so it fits typical drilled and tapped installations in cabinet shops. The Schaub and Company brand and specific 252-VN part number tie this knob to the broader Siena collection for repeatable ordering.
The 1-1/8 inch projection of this knob establishes how deep the handhold is from the cabinet face, so it affects how easily fingers can wrap behind the grip on thicker drawer fronts. The 3/4 inch width defines the transverse dimension, which influences how close you can position the knob to door edges or neighboring hardware without visual overlap. With a 1-3/8 inch length, the oval shape spans enough area for a secure pull while still fitting modest drawer faces. The 8-32 x 1 inch screw size means the mounting point is suited to cabinet-grade drilling patterns that commonly rely on 8-32 machine threads. The zinc die cast material provides a consistent body for threading this screw interface, supporting repeatable tightening across multiple units on a project.
The Schaub Siena Series Vibra Nickel 3/4 inch diameter knob is positioned for cabinets that need an oval pull sized by a 3/4 inch width and 1-3/8 inch length, so it fits doors or drawers where that footprint is planned. Its Vibra Nickel finish ties this knob to other Vibra Nickel decorative hardware, which supports a unified appearance on runs of casework or a full room of cabinets. The 1-1/8 inch projection sets the stand-off from the face, so it suits installations where that depth balances user grip and clearance around adjacent doors or appliances. As a knob built from zinc die cast material, it presents a solid, uniform shape that can be repeated across banks of drawers or tall pantry doors. The 252-VN manufacturer part number and Siena collection reference define it within Schaub and Companys line, which anchors the knob as a consistent choice whenever that specific style and finish combination is specified.
The defined 3/4 inch width and 1-3/8 inch length provide fixed dimensions for layout, letting installers reference those numbers when spacing knobs on drawer faces or aligning them vertically on doors. With a 1-1/8 inch projection, the knob positions the gripping surface at a known distance from the cabinet face, so planning clearances around adjacent panels or walls can follow that measure. The 8-32 x 1 inch screw size aligns with a standard cabinet knob thread, which streamlines boring operations that are already set up for that fastener style and thread pitch. Because the knob body is zinc die cast, each part is formed to a consistent profile, helping keep alignment even when multiple knobs are mounted in a straight visual line. The Siena collection naming and Vibra Nickel finish description give designers and installers a clear reference, so they can specify this exact knob when matching existing Schaub Siena Vibra Nickel hardware in a space.
The Schaub Siena Series 252-VN knob has a 3/4 inch width, a 1-3/8 inch length, and a 1-1/8 inch projection, so these measurements guide cabinet boring and layout spacing.
The knob uses zinc die cast construction, providing a solid, consistent body that supports uniform threading and a predictable feel across multiple cabinet fronts.
The knob uses a Vibra Nickel finish, so it visually coordinates with other Vibra Nickel decorative hardware in the same room or project.
The Schaub Siena Series Vibra Nickel knob has a 1-1/8 inch projection, setting how far it extends from the cabinet face for hand clearance planning.
The 252-VN knob uses an 8-32 x 1 inch screw size, matching a common cabinet hardware thread and simplifying integration with standard drilling setups.
The 252-VN knob is part of the Schaub Siena collection, tying it to matching Siena series decorative hardware for coordinated cabinet projects.
The Schaub Siena knob, defined by its 3/4 inch width, 1-3/8 inch length, and 1-1/8 inch projection, gives installers fixed dimensions that streamline layout across doors and drawers. The zinc die cast construction and Vibra Nickel finish identify it as a Siena collection piece from Schaub and Company, so it aligns with projects built around that specific style and finish. With an 8-32 x 1 inch screw size and the 252-VN part number, this knob fits cabinet hardware workflows built on standard threading and precise part references. For cabinet runs that call for Vibra Nickel Siena hardware, this knob provides the defined footprint and thread details needed for straightforward planning and installation.