Siena series ancient bronze knob from Schaub and Company is a large oval cabinet knob that uses zinc die cast construction with an ancient bronze finish, giving cabinet doors or drawers a substantial feel and a visually defined grip point. The knob has a 3 inch length, so the hand contacts more surface area when pulling, which helps when operating heavier cabinet fronts. A base diameter of 3/4 inch concentrates the mounting footprint, so the knob seats solidly on the cabinet face without taking up unnecessary stile space. Projection is 1-1/2 inch, which spaces fingers away from the door or drawer surface, reducing knuckle contact on thicker fronts. Width is 3/4 inch, which keeps the knob visually slim while still presenting enough edge for side-grip operation in tighter layouts. The 2-7/8 inch diameter classification and oval shape work together to present a long pull surface in a compact footprint.
The 3 inch length on this Schaub and Company knob provides a longer gripping surface, so the hand can pull from different angles on wide or tall cabinet fronts. Its 3/4 inch base diameter focuses contact at the mounting point, helping the knob register neatly over the drilled hole without crowding neighboring hardware. With a 1-1/2 inch projection, the knob stands off the surface enough that fingers clear the panel, which is useful on thicker face frames or overlays. The 3/4 inch width keeps the profile narrow, so the knob fits comfortably on slim drawer fronts or narrow rails. An 8-32 screw size interface supports attachment using widely used cabinet knob threading, which helps integrate this part into established shop drilling and tap patterns.
The Schaub and Company Siena series knob is identified as a large oval knob with a 2-7/8 inch diameter classification, which positions it as a statement piece on cabinet doors and drawers where a more substantial pull point is desired. Its 3 inch length creates an elongated contact surface, so the pull behaves almost like a compact handle, giving added leverage at the outer edge of wider doors. A 3/4 inch base diameter keeps the visual footprint tight against the face, which suits applications where the knob is aligned close to panel edges or decorative profiles. The 1-1/2 inch projection helps the hand clear adjacent trim or neighboring fronts, which is useful on installations with clustered door and drawer layouts.
The combination of 3/4 inch base diameter and 3/4 inch width concentrates the mass of the zinc die cast body near the mounting centerline, which supports repeatable alignment when installing multiple knobs along a run of cabinets. The 3 inch length and 1-1/2 inch projection work together so the pull point sits out from the surface with ample gripping area, reducing the effort needed to open heavier drawers. Because the knob uses an 8-32 thread, shops that already drill for standard cabinet knob hardware can keep hole sizing and threading consistent from job to job. The ancient bronze finish identifies the visual character of the knob, so it can be matched across a project where the same finish is required on every knob to maintain a uniform appearance on site.
The Schaub and Company Siena series knob has a 3 inch length, 3/4 inch width, 3/4 inch base diameter, and 1-1/2 inch projection, so the installed pull point offers extended grip with a compact mounting footprint.
The knob projection of 1-1/2 inch spaces the grip off the cabinet surface, allowing fingers to clear door or drawer faces during operation, which supports smoother opening on thicker fronts.
The Schaub and Company large oval knob is zinc die cast, giving the body a dense, uniform form that supports secure threading and a solid feel when pulling doors or drawers.
The 253-ABZ knob has an ancient bronze finish, providing a dark, aged metal look that coordinates with other bronze-toned components in a cabinet project.
The knob uses an 8-32 screw size interface, aligning with common cabinet knob threading so it fits standard drilled and tapped mounting points on doors and drawers.
The 3 inch length extends the gripping area, allowing pulls from various angles on wider cabinet doors or drawers, which improves leverage during everyday use.
The Schaub and Company Siena series ancient bronze large oval knob combines zinc die cast construction, a 3 inch length, and a 1-1/2 inch projection to deliver a defined, comfortable pull point on cabinet doors and drawers. Its 3/4 inch base diameter and 3/4 inch width keep the mounting area compact, so the knob fits neatly on narrow rails or slim drawer fronts while still presenting an elongated grip surface. With an ancient bronze finish and 8-32 screw size interface, this 253-ABZ knob integrates into bronze-focused layouts and standard cabinet drilling patterns on professional or serious DIY projects.