Schaub Traditional Series antique brass knob is a 1-1/4 inch diameter solid brass knob that provides a compact gripping point for doors or drawers, which suits cabinet layouts needing a smaller pull footprint. The 32 mm diameter dimension supports metric-based layouts on projects that follow European spacing, helping layouts stay consistent across a run. The antique brass finish creates a muted brass tone that works well where a traditional appearance is desired, aligning hardware with classic cabinet styles. The 1 inch projection sets how far the knob stands off the surface, giving fingers clearance without pushing the hardware excessively into the room. A 3/4 inch base diameter defines the contact area against the wood, which helps installers understand how much flat surface is needed for solid seating on the cabinet face. Manufacturer part number 706-AB identifies this exact combination of size, material, and finish.
The 1-1/4 inch diameter on the Schaub 706-AB cabinet knob sets the outer size that installers use to check spacing between adjacent knobs, allowing consistent visual gaps on multi-door runs. The 3/4 inch base diameter shows how much flat material is needed around the mounting hole so the base seats flush on the cabinet surface. The 1 inch projection tells how far the knob will stand off the front, which helps plan clearances near appliance panels or adjacent walls. The 8-32 x 1 inch screw specification defines the thread engagement and reach through typical cabinet door or drawer front thicknesses, which supports straightforward drilling and mounting in common cabinet construction.
The 1-1/4 inch (32 mm) diameter makes this Schaub and Company brass knob well sized for standard cabinet doors and smaller to mid-size drawers where a single knob is specified. The antique brass finish positions it within traditional decorative hardware schemes, which suits classic kitchens, built-ins, and furniture-style vanities needing a warmer metal tone. As part of the Traditional Series collection, the knob aligns visually with other pieces from the same family, which helps installers maintain a consistent design language across doors, drawers, and panels. The 3/4 inch base diameter allows the knob to sit comfortably on standard stile and rail widths, so it can be used on upper and lower cabinets without overwhelming narrow frames. The 1 inch projection supports everyday gripping motions while keeping the profile tight to the face, which is useful on cabinets near passages where a low-profile feel is desired.
The specified 1-1/4 inch diameter gives installers a reliable reference when laying out knob positions, so jigs or templates can be set once and repeated across the job. The 32 mm measurement provides a direct metric value that aids shops working from metric-based shop drawings, aligning field hardware choices with design documents. Solid brass construction keeps the knob within a single material category, which streamlines finish matching to other brass decorative hardware in the same space. The defined 3/4 inch base diameter helps confirm that the bearing surface covers the drilled hole perimeter, avoiding exposed material around the mounting point. The 1 inch projection dimension lets installers coordinate with door overhangs or trim details, limiting interference with nearby edges. The 8-32 x 1 inch screw specification standardizes the mounting interface, which simplifies ordering matching fasteners for additional doors or for future changes that follow the same thread pattern.
The Schaub 706-AB knob has a 1-1/4 inch (32 mm) diameter, a 3/4 inch base diameter, and a 1 inch projection, giving installers clear sizing for layout and clearance planning.
The knob is made from solid brass, providing a metal construction that coordinates with other brass decorative hardware in cabinet and furniture projects.
The knob has an antique brass finish, giving it a traditional brass appearance suitable for classic-style cabinets and matching antique brass hardware.
The knob projects 1 inch from the cabinet surface, which provides finger clearance while maintaining a relatively compact profile on doors and drawers.
The Schaub 706-AB knob uses an 8-32 x 1 inch screw, giving installers a standard cabinet hardware thread and length reference for mounting.
This knob is part of the Traditional Series collection from Schaub and Company, aligning it with other traditional-style decorative hardware pieces.
The Schaub 706-AB cabinet knob combines a 1-1/4 inch diameter, 3/4 inch base, and 1 inch projection in solid brass with an antique brass finish, which helps projects align size, material, and appearance in one part. Using these defined dimensions, installers can plan drilling locations and clearances that match typical cabinet layouts. For work that calls for traditional styling in brass, this knob provides a clearly specified option that fits standard doors and drawers while maintaining consistent visual proportions across the installation.