Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schaub Corinthian Series Ancient Bronze knob is a 1-3/8 inch diameter solid brass knob designed for decorative cabinet and furniture applications, so it gives doors and drawers a defined handhold with a consistent feel across the run. The ancient bronze finish on the knob establishes a dark, traditional appearance that supports coordinated hardware layouts in classic kitchens, baths, or built-ins. The knob is built from solid brass, which gives each pull point a dense, substantial construction that stays stable when fastened to cabinet doors or drawer fronts. A 1 inch base diameter provides a broad footprint on the mounting surface, spreading load over more area so the knob seats firmly against wood or panel material. The 1-1/4 inch projection spaces the gripping point off the face of the cabinet, creating room for fingers while keeping the knob close enough to avoid catching on passing traffic in tight runs.
This Schaub and Company Corinthian Series knob uses an 8-32 x 1 inch screw size, so the threaded insert is ready to pair with standard cabinet knob screw hardware in that thread pattern. The 1 inch long 8-32 screw specification helps match typical cabinet door and drawer front thickness, allowing the installer to engage the knob threads while leaving sufficient thread depth for a secure connection. With a 1 inch base diameter, the knob covers a modest area around the bore, helping conceal the drilled hole edges while keeping the footprint small enough for narrow rails or stile sections. The 1-3/8 inch head diameter and 1-1/4 inch projection work together to give enough space for fingertip pull access on doors and drawers without pushing the knob excessively into walkways or passage clearances.
This Schaub Corinthian Series Ancient Bronze 1-3/8 inch diameter knob suits cabinet and furniture locations where a decorative yet practical pull point is required on doors and drawers. The solid brass construction supports use on frequently operated cabinet doors, as the metal body handles repeated gripping at the same location without deforming under normal hand forces. With a 1 inch base diameter, the knob sits comfortably on face-frame cabinets or frameless fronts, giving enough coverage around the bore while allowing tight placement near stile edges. The ancient bronze finish supports projects that rely on a darker metal tone to coordinate with hinges, latches, or other decorative hardware in similar finishes. The knob diameter of 1-3/8 inch balances visual presence and ergonomics, so a run of several knobs across upper cabinets, base cabinets, or built-in furniture reads consistently without overpowering smaller fronts.
The specified 8-32 x 1 inch screw size gives installers a known thread and length target, simplifying layout when boring through standard cabinet doors and drawer fronts for this knob. Because the knob body is solid brass, tightening against the 1 inch base diameter distributes clamping pressure across a metal surface that resists crushing at the mounting point. The 1-1/4 inch projection provides repeatable stand-off from the surface, so a bank of drawers fitted with this knob lines up visually with consistent spacing from the faces. The combination of 1-3/8 inch head diameter and 1 inch base diameter creates a perimeter that helps mask slight tear-out or chipping at the drilled hole, supporting a clean finished appearance on site. With the ancient bronze finish covering the visible surfaces, each installed knob presents a unified color that ties together door and drawer fronts for a coordinated decorative hardware layout.
The Schaub Corinthian Series Ancient Bronze knob has a 1-3/8 inch diameter head, a 1 inch base diameter, and a 1-1/4 inch projection, giving clear size expectations for cabinet layout and drilling.
The 870-ABZ Corinthian knob is made from solid brass, providing a dense metal body that supports repeated use on cabinet doors and drawers.
This Schaub Corinthian Series knob uses an ancient bronze finish, giving the hardware a darker, aged appearance that coordinates with traditional design schemes.
This cabinet knob is specified with an 8-32 x 1 inch screw size, defining the thread and approximate length needed when fastening through typical cabinet fronts.
The 1-1/4 inch projection spaces the knob off the cabinet surface, creating finger clearance for gripping while keeping the pull point close to the face.
The 1 inch base diameter spreads contact over more area around the bore, helping the knob sit flush and visually cover the drilled hole edges.
The Schaub Corinthian Series Ancient Bronze 1-3/8 inch diameter knob, model 870-ABZ, combines a solid brass body, 1 inch base diameter, and 1-1/4 inch projection to support dependable cabinet and furniture pulls. With its ancient bronze finish and defined 8-32 x 1 inch screw size, this knob aligns well with decorative cabinet runs that call for a traditional metal tone and consistent mounting details. For projects where matching hardware dimensions and finish are important, this Corinthian Series knob from Wurth Baer Supply offers a clearly specified option ready for planned cabinet layouts.