Stick2 Cool White LED Strip Light For Task Areas

Stick2 LED 2.4W Cool White Strip Light defines a compact LED task light that delivers focused cool white illumination for work surfaces and cabinet interiors. The light uses 2.4 watts, so it provides usable task lighting while keeping power demand low on multi-light runs. The 12 inch aluminum housing keeps the strip short enough for tight sections of casework or shelving, while still spanning typical cabinet bays efficiently. Hera Lighting L.P. designs this strip as part of the Stick-LED Series, so it works within a consistent system across similar runs. The LED design offers virtually no maintenance over 50,000 hours of usable life, reducing service trips once installed in finished cabinetry. Very high and even light output gives a uniform wash, which helps avoid bright spots or dark gaps along counters and displays. Cool white color supports clear visibility on tasks where accurate viewing is important.

Key Stick2 LED Details That Support Your Projects

• Hera Lighting L.P. engineered this ultra compact strip with a height of only 3/8 inch, which lets it sit in tight reveals or shallow light valances without projecting into sightlines.
• The 12 inch length provides a practical span for under-cabinet sections and display bays, helping installers line up multiple sticks for continuous coverage without awkward gaps.
• Very high and even light output from the Stick-LED design delivers consistent illumination along its full length, which simplifies layout when aiming for uniform counters or shelving light.
• A 50 degree beam spread focuses light into a controlled area, directing output where the work happens and reducing wasted spill onto adjacent surfaces.
• Low energy consumption from the 2.4 watt load allows several strips to run on appropriately sized drivers, supporting longer daisy-chained installations within a project design.
• Approximately 50,000 hours of usable life means the LED source can stay in service in built-in millwork for long periods, limiting disruption once cabinetry is closed up.

Stick2 LED Installation And Power Interface Details

This Stick2 LED 2.4W Cool White Strip Light relies on Stick LED Connecting Cables as its interface between strips and to the driver, which allows a cleaner wiring path inside cabinets and casework. The integrated connecting system is designed so strips can be daisy chained up to 8 feet, helping you bridge longer runs under continuous countertops or displays using a single powered feed point. 6, 30, or 60 watt drivers must be purchased and installed with the Stick-LED Series lights for the fixture to operate, so load planning can match the total wattage of all connected strips. A 98 inch power cord is specified with the system, giving added reach from the driver location to the first strip in a run. Dimmers and on/off rocker switches are sold separately, allowing control components to be chosen to match the project layout and control preference.

How This Hera Stick2 LED Strip Works In Practice

Using The 12 Inch Stick2 Light In Cabinets

The Stick2 LED 2.4W Cool White Strip Light at 12 inches fits well under typical wall cabinets, where its compact aluminum body can sit near the front edge to throw light across the worktop. The ultra compact 3/8 inch height helps it recess into shallow channels or behind trim, keeping the source discreet while still delivering very high and even light output. In display cases, the 50 degree beam spread allows you to direct light down onto products or materials, concentrating brightness where visibility matters. Cool white output works for task zones where clear contrast is needed, such as workstations or preparation areas. Because the Stick-LED Series is part of Hera Lighting L.P.'s LED task lighting category, using multiple strips across a bank of cabinets keeps both appearance and performance consistent.

Daisy Chaining, Drivers, And Long-Term Operation

The Stick2 LED 2.4W Cool White Strip Light features an integrated connecting system that supports daisy chaining up to 8 feet, letting you link multiple sticks along a continuous cabinet run while maintaining a single electrical path. Stick LED Connecting Cables extend this linking capability between segments, which is useful when you need to navigate obstacles or spacing changes in the casework. Selecting 6, 30, or 60 watt drivers for the Stick-LED Series allows the total connected wattage of 2.4 watt strips to be grouped logically by run length, supporting efficient power distribution for each zone. The specified 98 inch power cords give flexibility in placing drivers in accessible areas while still reaching the first strip, which can streamline routing through cabinets or utility spaces. With low energy consumption and virtually no maintenance over about 50,000 hours of usable life, the Stick2 design supports long-term installations in finished millwork, reducing disruptions once a space is occupied.

Common Stick2 LED Task Lighting Questions

Choose This Stick2 Strip For Focused Cabinet Lighting

The Stick2 LED 2.4W Cool White Strip Light, 12 inch aluminum version, combines ultra compact height, cool white LED output, and 2.4 watt efficiency for task and display applications. With an integrated connecting system supporting up to 8 feet of daisy chained runs, it fits continuous under-cabinet or casework layouts. Very high and even light output, a 50 degree beam spread, and about 50,000 hours of usable life help it perform as a long-term task light within millwork. For projects using Hera Lighting L.P.'s LED task lighting system, this STICK2/12/CW strip aligns with the Stick-LED Series drivers, cables, and controls, so runs can be planned as part of a coordinated lighting approach.