TAPELED/WW LED tape lighting 12 foot flexible strip

TAPELED/WW LED Tape Lighting For Custom Runs

TAPELED/WW LED tape lighting from Hera Lighting L.P. is flexible, cut-to-size, self adhering Tape-LED lighting designed as 12 foot long stripes, so installers can run continuous light along cabinets, displays, or casework in one uniform system. The flexible mounting allows installation in and around most angles, which helps follow corners and contours without breaking the lighting line. Extremely small dimensions with a height of only 1/4 inch let the strip fit into tight reveals, shallow channels, or under-shelf edges where bulkier fixtures will not sit cleanly. Low energy consumption and virtually no maintenance with 30,000 hours of usable life reduce service trips over time. Tape-LEDs feature an integrated connecting system that can be daisy chained up to 16 strips with one power cable, supporting longer runs within a single layout. The 120 degree beam spread throws light broadly from each strip, covering more surface with fewer runs.

Key Tape-LED Details That Support Real Jobs

• Flexible, cut-to-size, self adhering Tape-LED lighting is supplied as 12 foot long stripes, so a single part number covers many layout lengths without separate rigid modules.
• Flexible mounting allows installation in and around most angles, letting runs follow inside corners, outside corners, or curved transitions while maintaining continuous illumination.
• Extremely small dimensions with a height of only 1/4 inch allow discreet placement in tight reveals, shallow channels, or under cabinet lips where larger fixtures would remain visible.
• Low energy consumption and virtually no maintenance with 30,000 hours of usable life support long-term installations where access is limited or teardown would disrupt finished work.
• The integrated connecting system can be daisy chained up to 16 strips with one power cable, simplifying wiring layouts on larger projects that need consistent light from section to section.
• The 120 degree beam spread and white tape with clear flexible lens provide wide, even coverage while keeping the hardware visually minimal against typical light-colored substrates.

Installation And Power Setup For Tape-LED Runs

This 24V DC constant voltage system works with Six, 30 or 60 Watt Drivers and 98 inch Power Cords that must be purchased and installed with the Tape-LED Series Lights in order for the fixture to operate, so power distribution stays matched to the strip design. Quick and easy installation is supported by the self adhering format, which lets the strip bond directly to the mounting surface for straightforward placement. The strip can be shortened to 6 inches for custom installs, allowing final trimming on site to match cabinet widths, niche dimensions, or display segments without reordering new lengths. Tape-LED Connecting Cables, Dimmers and On/Off Rocker Switches are sold separately, giving flexibility in how runs are connected, controlled, and switched for each project layout.

Using Hera Tape-LED Lighting In Real Projects

Where Flexible Cut-To-Size Tape-LED Works Best

The LED Rope Lighting Flexible/Cut-to-Size/Self Adhering Tape-LED Series from Hera Lighting L.P. is part of the LED Tape Lighting category, so it is suited to applications where linear, low-profile lighting is needed along cabinetry or architectural details. The 12 foot flexible, adhesive backed, 0.8W Tape-LED format allows long, continuous lines in kitchens, retail fixtures, or casework using one consistent light type. Because it is flexible and designed for installation in and around most angles, runs can be taken around corners and through transitions without breaking the visual line of light. The white tape with clear flexible lens helps the strip blend against light substrates when the light is off, supporting clean-looking installations. With a 120 degree beam spread, the same run can wash both vertical and horizontal surfaces nearby, giving broad coverage from a single concealed channel.

Details That Support Consistent Results And Layouts

The 24V DC constant voltage system standardizes power across the Tape-LED Series, which supports predictable light behavior along the full 12 foot length and across multiple runs. Being able to daisy chain up to 16 strips with one power cable simplifies planning of multi-section installations, because runs can be organized into longer chains without changing the product type. The ability to shorten strips to 6 inches during a custom install lets the installer fine-tune lengths to exact cabinet or shelf dimensions while staying within the same Hera TAPELED/WW part. Low energy consumption and virtually no maintenance over 30,000 hours of usable life mean once the layout is set, the lighting remains in place for extended periods without frequent service. As a product in the LED Tape Lighting class from a lighting-focused manufacturer, it is designed to serve as a primary linear lighting element rather than a decorative add-on.

Common Questions About TAPELED/WW LED Tape Lighting

Select Hera TAPELED/WW For Flexible Linear Runs

The Hera Lighting L.P. TAPELED/WW flexible, adhesive backed, 0.8W Tape-LED Strip combines 12 foot long stripes, a 24V DC constant voltage system, and the ability to shorten to 6 inches, so one product covers many linear lighting layouts. With flexible mounting that works in and around most angles, an integrated connecting system that supports daisy chaining up to 16 strips, and low energy consumption with 30,000 hours of usable life, it serves well where long, low-profile runs are needed. Choose this LED Tape Lighting when a single, consistent strip solution is needed for cabinets, displays, or similar linear applications.