Aluminum Piano Hinge 1-1/2 x 72 1519E04AL

Aluminum Piano Hinge 1-1/2 x 72 For Continuous Runs

Aluminum piano hinge 1-1/2 x 72 describes a continuous Larsen and Shaw piano hinge made from aluminum with a 1-1/2 inch open width and 72 inch length, giving you a long, uniform pivot line for lids, doors, or panels that need full-length support. The hinge is part of the piano hinges category, so it is intended as a continuous hinge solution rather than short, segmented hardware, which helps distribute load more evenly along the edge. The aluminum construction is stated at 0.040 gauge, so the leaf thickness suits lighter-duty applications where a slimmer profile and easier cutting are useful on site. The web description notes that aluminum versions use #5 flathead screws, aligning the countersunk holes with a common screw size for cabinet and light woodworking layouts. This hinge is identified by manufacturer part 1519E04AL, which ties directly to specification matching across drawings or reorders.

Key Piano Hinge Details That Support Workflow

• The hinge is made from aluminum, so it offers a lighter weight option that can be easier to handle during long runs and simpler to cut to size when fitting custom openings.
• The open hinge width is specified as 1-1/2 inches, giving a predictable leaf spread that simplifies layout to edge distances and helps maintain consistent reveal and alignment along the entire length.
• The hinge length is 72 inches, so one piece can span many cabinet doors, lids, or panels in a single run, reducing joint points where play or misalignment could otherwise develop over time.
• The aluminum piano hinge is 0.040 gauge, providing a relatively slim profile that sits closer to the mounting surface, which can be useful when clearances around adjoining parts are tight.
• The web description states that aluminum hinges require #5 flathead screws, so the countersunk holes are formed to seat that head style properly, giving a flush mount that helps parts close without interference.
• All cut lengths of the hinge have countersunk screw holes spaced 2 inches on center, which creates a regular fastening pattern that spreads load consistently and simplifies marking during repetitive installs.

Mounting And Fastening Details For This Hinge

This Larsen and Shaw piano hinge uses countersunk screw holes formed along the leaves, and the web description specifies that the aluminum version is intended for #5 flathead screws, so the fastener head nests into the countersink to keep the surface low profile. All cut lengths are described as having these holes spaced 2 inches apart on center, which sets a regular fastening rhythm that helps installers plan hole locations along cabinet sides or lids without custom spacing. The open hinge width of 1-1/2 inches defines how far the leaves extend across the substrate, influencing where you drill and how much bearing surface you get on each side of the joint. With a 72 inch length and 0.040 gauge aluminum construction, the hinge supports long, continuous runs while remaining workable with common cutting tools when a shorter section is needed.

Using This 1519E04AL Hinge In Real Projects

Where This Aluminum Piano Hinge Fits Best

This product is identified as a piano hinge in the hinges category, so it is intended for continuous-edge applications such as lids, long cabinet doors, or access panels that benefit from full-length support. The 72 inch length allows one hinge strip to cover a substantial span, which reduces hinge breaks and helps maintain a consistent pivot line across the entire edge. The 1-1/2 inch open hinge width means each leaf covers a modest surface area, giving a balance between bearing surface and clearance that matches many cabinet and woodworking layouts. The aluminum 0.040 gauge thickness keeps the hinge profile relatively thin, which works well where surrounding clearances are tight or where a more discreet hinge line is desired. Because the aluminum version is specified to use #5 flathead screws in the countersunk holes, it aligns with lighter cabinetry or panel projects that already rely on smaller fastener sizes.

Details That Help Achieve Repeatable Alignment

The open hinge width of 1-1/2 inches gives a consistent reference when setting back from door or lid edges, which supports repeatable hinge placement across multiple identical units or batch work. All cut lengths of the hinge have countersunk screw holes spaced 2 inches on center, so once the first hole is aligned, the rest follow a predictable pattern, reducing layout time and helping the leaf pull down evenly along its full length. The aluminum material in 0.040 gauge keeps the leaves more manageable during handling, which is especially useful on a 72 inch strip when working alone or in tight shop spaces. The defined requirement for #5 flathead screws on aluminum hinges means the countersinks are shaped for that head profile, helping the screw seat flush and reducing the chance of proud heads interfering with door or lid movement. With manufacturer part number 1519E04AL tied to these characteristics, matching replacements or adding additional hinges to an existing run remains straightforward across projects.

Common Questions About This Aluminum Piano Hinge

Select This 1-1/2 x 72 Hinge For Continuous Runs

The Larsen and Shaw aluminum 1-1/2 x 72 piano hinge with 0.040 gauge construction and countersunk holes every 2 inches on center provides a defined format for long, continuous runs. The specified use of #5 flathead screws for aluminum versions ties fastener choice directly to the hinge design, helping the leaves sit flush along cabinet or panel edges. With its 1-1/2 inch open width and 72 inch length, this 1519E04AL hinge from Wurth Baer Supply supports projects that need full-length support and consistent alignment from one edge to the other.