Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica 2044-99 hammered pewter aluminum metal laminate is a DecoMetal metal laminate sheet in a hammered aluminum finish with a phenolic back. The laminate provides a metal face bonded to a thermoset phenolic backing, so the sheet handles like laminate while presenting a real hammered aluminum surface for design-driven vertical work. The sheet is specified at 48 inches by 96 inches, giving coverage suitable for larger wall or panel sections in a single piece. The phenolic back is engineered to prevent creasing during handling and fabrication, so the panel stays flat through cutting and bonding. That same backing is designed to improve adhesion to typical laminating substrates, so fabricators can rely on a consistent bond line across the full 4-foot by 8-foot field.
This DecoMetal metal laminate is engineered for vertical interior applications, so it is oriented toward wall panels, casework faces, reception fronts, and similar installations rather than horizontal work. The hammered aluminum face presents as a metal sheet, while the phenolic back allows the product to act like laminate during fabrication and bonding. Because the phenolic back prevents creasing, fabricators can transport and stage panels while maintaining a flatter profile through cutting, routing, and layup. The improved adhesion characteristic of the phenolic backing supports uniform bonding to common laminate substrates, helping maintain surface contact across the full 48 by 96 area during installation.
This Formica Corporation DecoMetal metal laminate is defined as a metal laminate with a hammered aluminum or copper sheet and a phenolic back, and it is engineered for vertical interior applications. In practice, that means the hammered pewter aluminum face can be used where a decorative metal look is desired on interior vertical surfaces such as wall accents or casework fronts. The full 48 inch by 96 inch panel size allows designers and fabricators to span typical wall bay widths or cabinet runs with fewer joints. Because the laminate uses a phenolic back to support the metal sheet, it behaves differently from raw metal, resisting creasing during normal shop handling and layout work.
The DecoMetal metal laminate uses a metal sheet with a phenolic back, and this phenolic layer is specifically described as preventing creasing and allowing for improved adhesion to substrates. That combination gives fabricators a rigid yet workable panel, so the hammered aluminum face can be bonded like other laminate while benefiting from the stability of a thermoset backing. The product is noted as p grade 86 at 0.050 inches, or 1.3 mm thickness, which provides a substantial metal-faced laminate suitable for decorative vertical use without the thinness of foil stock. In shop workflow, that thickness and backing support precise cutting and routing while maintaining panel integrity during pressing and installation.
The Formica 2044-99 hammered pewter aluminum metal laminate is specified as a 48 inch by 96 inch sheet, providing a standard 4-foot by 8-foot panel for vertical interior decorative use.
This DecoMetal metal laminate uses a hammered aluminum or copper sheet bonded to a thermoset phenolic back, so it combines a real metal face with a laminate-style backing for fabrication.
The phenolic back on this laminate is designed to prevent creasing and to allow for improved adhesion to substrates, which supports stable fabrication and consistent bonding across the panel.
This metal laminate is engineered for vertical interior applications, so it is oriented toward interior wall panels, casework faces, and other non-horizontal decorative surfaces.
The 0.050 inch, or 1.3 mm, thickness identifies this as a p grade 86 DecoMetal laminate, giving a substantial metal-faced sheet for decorative vertical interior use.
The 2044-99 hammered pewter aluminum metal, 48 inch by 96 inch metal finish laminate is manufactured by Formica Corporation as part of its DecoMetal metal laminate line.
This Formica 2044-99 hammered pewter aluminum metal, 48 inch by 96 inch metal finish laminate from Formica Corporation combines a hammered aluminum face with a phenolic back that prevents creasing and supports improved adhesion to substrates. The p grade 86, 0.050 inch (1.3 mm) construction is engineered specifically for vertical interior applications, aligning it with decorative wall and casework projects. For projects calling for a hammered pewter metal look on interior vertical surfaces, this DecoMetal metal laminate delivers a metal sheet aesthetic in a laminate-based format ready for fabrication and bonding.
Sold In: 1 Sheet