adjustable plastic cabinet leveler from Hardware Concepts Big Foot Series provides a simple way to set cabinet or furniture height using an integrated screw-adjustable foot, so installers can dial in final elevation without reworking the case, saving time on site. The leveler adjusts from 3-5/8 inches to 5-1/2 inches in height, which gives enough range to handle typical toe-kick spaces and minor floor variations in kitchen, bath, or shop runs. Its 1-1/4 inch diameter foot spreads the load over a wider area, helping reduce point pressure where the cabinet meets the floor, which supports smoother height changes. The component is made of ABS plastic, so the housing and foot stay lightweight yet consistent to work with during layout and adjustment. A black finish lets the leveler blend into dark toe-kick cavities, keeping the hardware visually discreet in standard cabinet installations.
The Big Foot Series cabinet leveler component is described as adjustable from 3-5/8 inches to 5-1/2 inches, so the installer can work within that range when setting toe-kick height or matching existing runs. Because the leveler is a plastic cabinet and furniture leveling component, it is suited to sit under cabinet bases or work surfaces where fine height control is needed. The 1-1/4 inch diameter foot gives a defined target point to rest on the floor, which simplifies checking contact across several levelers along a run. With the body made of ABS plastic in a black finish, the part remains easy to handle and position against cabinet material while staying visually low profile in the finished base area.
This plastic cabinet leveler sits in the Work Surface & Tables and Cabinet/Furniture Levelers category, so it is intended for use under cabinets, furniture bases, and work surfaces that require adjustable support. As part of the Leg Levellers and Toe kicks product class, it is well suited to installations where a continuous toe space or plinth height must be maintained along a run of cabinets. The adjustable range of 3-5/8 inches to 5-1/2 inches allows use in many standard base cabinet situations, such as kitchen lines or shop storage, where that distance from floor to cabinet bottom sets the visual and functional toe-kick. The 1-1/4 inch diameter foot provides a defined contact area that works under cases, shelves, or frame members, helping support weight at key points while still permitting height changes.
The 3-5/8 to 5-1/2 inch adjustment span gives fabricators a known working envelope, so toe-kick designs and cut lists can be based on this range and repeated across projects without re-dimensioning every base. Using a Big Foot Series cabinet leveler component standardizes the leveling method, which simplifies setup patterns when multiple cabinets share the same floor and must align at a common reference height. The ABS plastic body helps each leveler maintain consistent dimensions, so drilling locations, clearances, and base layouts translate predictably from one cabinet to the next. The black finish supports a clean appearance in darker recesses, so installers can focus on structural alignment rather than visual distraction at the base. With a 1-1/4 inch diameter foot carrying the load, the support point is clearly defined, which helps installers read just how much turn on the adjustment is changing elevation as they bring several units into plane along a wall.
The adjustable height plastic leveler 5910-000 ranges from 3-5/8 inches to 5-1/2 inches, which lets installers match common toe-kick heights and compensate for moderate floor variation across a run.
The cabinet and furniture leveler foot is 1-1/4 inches in diameter, spreading load over a wider area so small adjustments translate smoothly without concentrated pressure at a tiny point.
The Hardware Concepts Big Foot cabinet leveler is made of ABS plastic, which keeps the component lightweight and dimensionally consistent for repeated cabinet fabrication layouts.
This plastic cabinet leveler sits in Work Surface & Tables and Cabinet/Furniture Levelers categories, so it is used under cabinets, furniture bases, and work surfaces that need adjustable height.
The black finish cabinet leveler blends into dark toe-kick or base cavities, keeping the support hardware less noticeable in finished cabinet installations.
The Big Foot Series cabinet leveler designation indicates it is a dedicated cabinet leveler component with a defined 1-1/4 inch diameter foot intended for adjustable support at the base.
The adjustable height plastic leveler 5910-000 from Hardware Concepts, part of the Big Foot Series cabinet leveler components, combines an ABS plastic body, black finish, 3-5/8 to 5-1/2 inch range, and 1-1/4 inch diameter foot to support predictable cabinet and furniture leveling. For cabinetmakers and installers working with Work Surface & Tables or base runs that rely on leg levellers and toe kicks, these specifics turn into straightforward planning dimensions and clear support points. Choosing this cabinet and furniture leveler foot for your next run lets you build around known heights and a consistent adjustment method across the project.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  PL5920-000 Mfr# 5920-000 | Plastic Cabinet Leveler Components Screw In Sockets | ||||
Sold in: 1 Each |  PL5899-000 Mfr# 5899-000 | 2 Finger Double Side Adhesive Toe Kick Clip, Black | ||||
Sold in: 1 Each | PL5980-000 Mfr# 5980-000 | Plastic Cabinet Leveler Components Sturdy Foot | ||||
Sold in: 1 Each |  PL5975-000 Mfr# 5975-000 | Plastic Cabinet Leveler Components Leveler Extensions |