toe kick clip screw-on black plate describes this Hardware Concepts plastic screw mount toe kick clip that fastens a cabinet toe kick to its mounting point using a screw-on plate for a secure, repeatable connection. The clip is made of high impact polypropylene, so it resists typical bumps at the base of cabinets and keeps its shape under regular use. The white clip presents a neutral appearance at the toe space, while the black screw-in plate stays largely hidden behind the toe kick for a clean finished look. The clip size of 2-1/8 inch high by 1-1/2 inch wide sets a predictable interface, helping installers align toe kicks evenly across a run of cabinets. This part is identified as Hardware Concepts, Inc. manufacturer number 5696-000, giving shops a consistent reference for repeat jobs and service work.
This Hardware Concepts plastic screw mount toe kick clip relies on a screw-in black plate as its base, so the installer positions and fastens the plate first, then uses the clip to engage the toe kick. The screw mount approach ties the plate directly to cabinet or support material, giving the clip a solid backing for the toe piece. With the clip measuring 2-1/8 inch high and 1-1/2 inch wide, the mounting zone is compact, which helps when working in the limited space near cabinet legs and levelers. The defined size and two-part arrangement also support repeat layouts across multiple cabinets, because installers can place plates at matched heights and then use the clips to carry the toe line through.
This Hardware Concepts toe kick clip sits in the cabinet and furniture levelers category, so it is suited to the lower sections of cabinets and work surfaces where a toe kick is required. As a toe kick component made of high impact polypropylene, it handles the everyday conditions at floor level, such as foot contact and light cleaning, without adding metal at the front edge. The white clip works visually at the toe space, while the screw-on black plate stays tied to structural members behind the toe. With its 2-1/8 inch by 1-1/2 inch format, the clip is sized for use along standard cabinet bases, giving fabricators a repeatable part for runs of units.
The screw-on black plate provides a defined mounting interface, so once an installer locates the plate on the cabinet, each matching clip positions the toe kick in the same relative spot, which supports straight, aligned toe lines. The high impact polypropylene construction helps the clip maintain its geometry under regular cabinet use, reducing the likelihood that toe pieces shift from minor contact. The identified manufacturer part number 5696-000 gives shops a precise reference for ordering the same toe kick clip again, which supports consistent builds across projects. Being part of the leg levellers and toe kicks product class, this clip fits into systems that adjust or finish the cabinet base area, helping maintain the transition between levelers and finished toe fronts.
The Hardware Concepts 5696-000 is a plastic screw mount toe kick clip with a white clip and black screw-in plate, used to secure a toe kick panel at the base of cabinets.
The toe kick clip is made of high impact polypropylene, which provides a rigid, non-metallic contact surface suited to everyday contact at cabinet toe areas.
The plastic screw mount toe kick clip measures 2-1/8 inch high by 1-1/2 inch wide, giving installers a defined footprint to plan spacing along cabinet bases.
The screw mount design uses a black screw-in plate fastened to cabinet structure, providing a firm base for the white clip to hold the toe kick in position.
The white clip faces the toe space where it may be seen, while the black screw-in plate sits behind the toe kick, helping maintain a clean exterior appearance.
This Hardware Concepts toe kick clip belongs to the cabinet and furniture leg levellers and toe kicks class, aligning it with components used at cabinet base areas.
The Hardware Concepts plastic screw mount toe kick clip with white clip and black screw-in plate provides a defined, repeatable way to secure toe kick panels along cabinet bases. Its 2-1/8 inch by 1-1/2 inch size and high impact polypropylene construction support consistent alignment at the toe space. When a project calls for a toe kick clip within the leg levellers and toe kicks category, the clearly identified 5696-000 part offers a specific, cataloged option. Choose this toe kick clip screw-on black plate style when a screw-mounted base and a non-metallic visible clip match your cabinet base construction approach.
Sold In: 1 Each