Outside Corner Mirror Molding is a metal edge molding from New York Metal designed for outside corners where a 1/16 inch edge needs to be finished, so corner transitions on mirrors or panels present as a continuous surface. The molding is part of the metal edge moldings category, which means it is built to cover and protect exposed edges, helping the corner stand up better in normal shop and jobsite handling. Dimension C of 1/16 inch matches thin mirror or similar material thickness, so the molding seats over the edge rather than sitting proud. Dimensions A at 7/16 inch and B at 5/8 inch define the leg coverage on each side of the corner, giving predictable coverage when laying out cuts or aligning with adjacent trim. The polished finish on the A face only provides a clean show surface on one side, so the visible leg delivers a finished look while the opposite leg focuses on coverage.
The Outside Corner Mirror Molding for 1/16 inch is sized with a C dimension of 1/16 inch, so it is intended to wrap edges that match that thickness and sit tight to them. With A at 7/16 inch and B at 5/8 inch, each leg has a fixed coverage width, which helps when cutting lengths and planning miters around outside corners. The polished finish on the A face only means that during install you orient the molding so the polished leg faces the viewing side, providing a defined metal border. As a metal edge molding, it is suited to edging tasks where you want a rigid corner profile that tracks consistently along the corner line.
The web description states that these mirror moldings are used in the glass industry, so this Outside Corner Mirror Molding fits projects that work with mirror or glass edges at 1/16 inch thickness. Its role in any application where a corner or seam needs to be concealed means it can be applied wherever two surfaces meet at an outside corner and you want a metal profile to cover that joint. Being part of the metal edge moldings class places it alongside other edging solutions, so it serves as the dedicated profile when the corner is exposed to view and needs a shaped metal finish. The standard length of material at 12 ft supports longer runs, which helps when trimming tall mirrors or extended wall sections without many joints along the length.
The Outside Corner Mirror Molding is identified with dimensions A: 7/16 inch, B: 5/8 inch, and C: 1/16 inch, so installers can plan coverage, overhang, and edge engagement before cutting. Having A and B at different dimensions gives a clear orientation, which simplifies deciding which side presents to the room and which side runs along the return surface. The note that it is polished on the A face only specifies that the show surface is limited to one leg, guiding layout so the visible side carries the polished finish. The manufacturer part number 252P and SAP description POLISHED OUTSIDE CORNER-819P provide traceable identifiers, which helps align job specs and reorders to the exact same molding profile for consistent appearance across multiple installations or phases.
The Outside Corner Mirror Molding has a C dimension of 1/16 inch, so it is sized for edges around 1/16 inch thick, providing a more precise wrap at the corner.
The Outside Corner Mirror Molding has an A dimension of 7/16 inch and a B dimension of 5/8 inch, which defines how far each leg extends over the adjoining surfaces at the corner.
The Outside Corner Mirror Molding is polished on the A face only, so the 7/16 inch leg provides the finished show surface when oriented toward the viewing side.
The Outside Corner Mirror Molding has a stated standard length of material at 12 ft, giving extended coverage for tall mirrors or long outside corners in one run.
The Outside Corner Mirror Molding is used in the glass industry and in any application where a corner or seam needs to be concealed, so it suits exposed mirror or panel corners.
The Outside Corner Mirror Molding is listed under metal edge moldings, meaning it functions as a rigid metal profile for protecting and finishing outside edges.
The Outside Corner Mirror Molding for 1/16 inch from New York Metal combines a defined C dimension of 1/16 inch with A and B legs at 7/16 inch and 5/8 inch, so it targets thin-edge corners with known coverage. Its use in the glass industry and in applications where a corner or seam needs to be concealed makes it suited to mirror and panel edges that will remain visible. The polished A face provides a clear show side for the corner line. Order this 12 ft standard length profile when you need a metal edge molding that finishes and hides outside mirror seams around 1/16 inch material.
Sold In: 1 Each