Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune draw latch STF-80 uses a spring loaded latch to pull mating parts together and hold them in position, which helps keep doors or panels closed under load. The stainless steel material provides a corrosion-resistant body, which supports use in demanding shop or jobsite environments. The satin finish on this steel latch creates a smooth, low-glare surface, which helps it blend into visible hardware layouts. With a 1-5/16 inch width, this latch offers a compact footprint across the mounting surface, which helps when space on the frame or panel edge is limited. The 13/16 inch length concentrates the latch body in a short run, which suits tight mounting zones near corners or narrow rails. A 3-3/16 inch height gives the latch a defined profile off the surface, which provides room for hand operation and engagement while staying compact overall.
This spring loaded draw latch uses a recommended screw size of M4, which gives installers a clear fastener diameter to match common shop hardware assortments. Using an M4 size across the mounting points keeps hole preparation consistent, which simplifies layout when placing multiple STF-80 latches on a run of doors or panels. The compact 1-5/16 inch width defines the lateral space required for mounting, which supports planning on narrow frames, rails, or equipment flanges. With a 13/16 inch length, the latch body occupies limited edge distance, which allows it to sit close to corners or other fittings while still providing full spring action. The 3-3/16 inch overall height describes the working envelope from the mounting surface, which aids in assessing clearance with adjacent panels or handles.
The Sugatsune draw latch STF-80, built from stainless steel, suits installations where corrosion resistance matters, such as cabinets or enclosures that see moisture or regular cleaning. Its spring loaded latch design maintains closing pressure on mating parts, which helps doors, hatches, or access panels stay pulled tight against their stops. With a 1-5/16 inch width, the latch fits on modest face-frame or panel edges, which works well on smaller compartments or equipment doors. The short 13/16 inch length helps it nest into compact areas, which is useful on narrow rails, mullions, or machine housings with limited surface real estate. A 3-3/16 inch height offers enough profile to grasp and operate, which supports use on panels that are opened and closed frequently through the workday.
The spring loaded design of this stainless steel draw latch keeps tension on the engagement point, which helps reduce rattle and movement when cabinets or equipment experience vibration. That spring action also maintains a consistent pull between mating parts, which supports repeatable panel alignment over time. The 1-5/16 inch width sets mounting hole spacing within a compact band, which simplifies marking and drilling on narrow stiles. Because the latch length is only 13/16 inch, more of the surrounding edge remains free, which leaves room for hinges, locks, or other hardware on the same line. The 3-3/16 inch height provides a predictable stand-off from the surface, which helps when checking for clear swing of nearby doors or covers. The recommended M4 screw size ties directly into common metric fastening setups, which streamlines hardware selection and helps keep installations consistent across multiple latches.
Sugatsune draw latch STF-80 uses a spring loaded latch mechanism, which maintains tension on the catch so panels stay pulled together under normal vibration.
The STF-80 latch uses stainless steel material, which offers corrosion resistance and supports use on cabinets or equipment exposed to moisture or cleaning.
The Sugatsune draw latch STF-80 has a 1-5/16 inch width, a 13/16 inch length, and a 3-3/16 inch height, which defines the mounting footprint and operating clearance.
The spring loaded latch on the STF-80 maintains constant pulling force, which helps keep doors or panels closed when equipment or cabinetry experiences vibration.
The Sugatsune draw latch STF-80 uses a recommended screw size of M4, which aligns with common metric fasteners for consistent mounting.
The STF-80 latch has a satin finish on its steel material, which provides a smooth, low-glare appearance that coordinates with other satin hardware.
The Sugatsune draw latch STF-80 combines a spring loaded latch mechanism with stainless steel construction, which suits cabinets or enclosures that see vibration and potential moisture. Its 1-5/16 inch width, 13/16 inch length, and 3-3/16 inch height define a compact but workable footprint, which fits tight mounting areas on doors, panels, or equipment housings. With a recommended M4 screw size, the latch matches common metric fastening setups, which supports consistent installations across multiple units. For projects needing a satin finish on visible hardware, this draw latch offers a subdued appearance while providing the spring tension needed to keep panels pulled together.
