Master Keyed Lock Plugs from CompX Timberline Lock are lock plugs designed to work with all Timberline cylinder bodies, so one plug style supports a wide range of cabinet lock locations using the same cylinder platform. The satin nickel finish on this LOCK PLUG, SATIN NICKEL part provides a clean, neutral appearance that fits typical cabinetry hardware finishes in commercial and shop environments. Each lock plug is keyed different, giving every lock location a distinct key number and supporting job layouts where separate access control is required across multiple doors or drawers. All lock plugs are master keyed, so they participate in a master key system that allows individual keys for users while supporting master key access for supervisors or service personnel in the same installation. The key number is coded on the face of the plug, which lets installers match cylinders to their key chart quickly during setup or future changes.
This CompX Timberline Lock plug is specified as a LOCK PLUG, SATIN NICKEL with manufacturer part number LP700KD-151 & UP, so it aligns with Timberline master keyed systems using that numbering range on project schedules. Because all lock plugs shown will work with all Timberline cylinder bodies, a single cylinder body type can be stocked for casework while the correct face finish and key number combination is selected from the lock plug family during assembly. The keyed different design, combined with the master keyed system, supports layouts where installers match specific key numbers to rooms, cabinets, or departments, then document those numbers directly from the coded face. Additional key numbers are available as SPECIAL ORDER, so large or expanding key control schemes can add new, distinct key changes while still staying within the Timberline master keyed system.
As lock plugs in the Lock Accessories category, these Master Keyed Lock Plugs integrate into Timberline cylinder bodies used in cabinet and casework lock applications, letting the same core cylinder bodies support multiple finish and key schemes in one facility or across several jobs. The manufacturer designation LP700KD-151 & UP identifies this group of lock plugs within the Timberline system, which helps project planners specify a keyed different, master keyed range that can be mapped to door, drawer, or panel locations. Because all lock plugs shown will work with all Timberline cylinder bodies, hardware planners can design around a single cylinder footprint while assigning specific lock plugs where satin nickel faces and defined key numbers are required at visible fronts.
The fact that all lock plugs are master keyed means every keyed different position can still be opened by the master key, which simplifies building-wide access for facility managers or service staff while leaving day-to-day keys limited to their own lock. With key numbers coded on the face and keys, installers can label, record, and service lock locations using the visible code, reducing confusion when matching spare keys or when rekeying portions of a project that share the same numbering scheme. Choosing lock plugs based on finish and key numbers your job requires lets specifiers coordinate both appearance and key control, so satin nickel lock faces can be tied to a defined code range such as LP700KD-151 & UP on their keying schedule. Because additional key numbers are available as SPECIAL ORDER, a growing project can extend its keyed different count within the same master key structure, which supports long-term expansion of controlled access points without changing the underlying Timberline cylinder bodies.
These lock plugs work with all Timberline cylinder bodies, so one cylinder platform can be paired with many plugs, supporting varied key numbers and finishes across a project.
These lock plugs are keyed different, so each plug has its own key number, supporting separate access for individual cabinets or areas in a master keyed layout.
All lock plugs are master keyed, allowing one master key to operate multiple keyed different plugs, which simplifies access for supervisors or service personnel.
The key number is coded on the face so installers and facility staff can read and record key codes directly at the cabinet, streamlining key control and service work.
LP700KD-151 & UP identifies the manufacturers part number and key number range, helping specifiers align these keyed different plugs with their keying schedules.
Additional key numbers are available as SPECIAL ORDER, allowing expanded keyed different counts within the same master keyed Timberline system for growing installations.
Choose this CompX Timberline Master Keyed Lock Plug in satin nickel when a LOCK PLUG, SATIN NICKEL is specified and keyed different control within a master keyed system is required on cabinets or casework. Using lock plugs that work with all Timberline cylinder bodies keeps cylinder inventories straightforward while allowing you to match face finish and key numbers to each opening on your key chart. Select the LP700KD-151 & UP range when that numbering block appears on your project documents, and apply key numbers coded on the face to keep records aligned across installation, future changes, and service visits.
Sold In: 1 Each
