Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Paint Veneer Core from States Industries is a domestic maple plywood panel designed as a board panel product for woodworking use. The veneer core plywood construction provides a wood-based panel structure that works as a stable substrate in cabinet and casework projects. The panel is built with a white whole piece face, so the maple surface presents as a single, continuous face sheet rather than smaller pieces. That whole piece face layout supports a more uniform appearance across the field of the panel on visible cabinet sides or large door faces. The panel is manufactured in a C-3 grade, pairing a cabinet-grade face with a utility-grade back for situations where one side is more visible in the finished installation. As a plywood hardwood panel, it fits typical shop workflows for cutting, edge-banding, and assembly.
The 3/4 inch thickness of this States Industries plywood keeps cabinet and furniture components on a widely used standard, which helps maintain consistent joinery depths and shelf pin drilling programs across multiple jobs. The 48.5 x 96.5 sheet size gives a bit of extra material beyond nominal four-by-eight, so operators can cut past minor edge damage while still pulling full-length gables or tall cabinet sides. The veneer core panel structure keeps the product firmly in the plywood hardwood category, so it drops into typical rack storage and handling patterns with other sheet goods of similar thickness. As a domestic maple, white-faced panel, it aligns visually with maple-based projects where part sizing and face orientation need to be repeatable job to job.
This domestic maple plywood panel is designed as a board panel product in the plywood hardwoods category, so it fits woodworking environments that rely on sheet goods for cabinet and furniture components. The white whole piece face offers a continuous maple surface that suits applications where the face of the panel stays visible, such as end panels, door panels, or exposed cabinet interiors. Because the panel uses a veneer core and 3/4 inch thickness, it can be laid out for cabinet boxes, shelving, and partitions using standard construction methods that match other hardwood plywood in the same thickness range. The maple species and white color tone allow this sheet to coordinate with other maple-based elements in a room, helping projects maintain a consistent appearance across multiple components drawn from the same type of plywood.
The C-3 grade rating pairs a better face with a more utilitarian back, which helps installers orient the higher-grade side toward the primary viewing direction while still drawing structural value from the back side in concealed spaces. That grade combination supports efficient use of the panel, directing the best surface to doors, drawer fronts, or interior cabinet faces where appearance is more critical. The 48.5 x 96.5 dimensions create layout flexibility, allowing cut lists to nest tall parts or multiple cabinet components on a single sheet while trimming edges to square without sacrificing finished size. The 3/4 inch thickness ties directly into common hinge cup boring depths, groove sizing, and dado proportions that shops already use with hardwood plywood, streamlining setup from job to job. As a States Industries product identified by part number 5017/701282 and SAP description WHT MPL,C/3,19.4mmX4X8,PF1S,VC, it can be referenced precisely in ordering and shop drawings so the specified maple plywood matches what is pulled for production.
The panel is 3/4 inch thick, so cabinet and shelving parts can align with standard 3/4 inch construction methods and tooling used for hardwood plywood.
The sheet measures 48.5 x 96.5, providing a slightly oversized panel that supports trimming while still yielding full-size cabinet and furniture components.
The C-3 grade pairs a better face with a more utility back, allowing the higher-grade side to be oriented toward visible cabinet or furniture surfaces.
The white whole piece face describes a face veneer laid up as a single continuous piece, which supports a more uniform appearance across visible surfaces.
PF1S in the SAP description indicates a panel with one primary finished face, guiding installers to orient the finished side toward the viewing direction.
The veneer core construction keeps this product in the plywood hardwood class, matching established handling, cutting, and joinery processes for similar panels.
This States Industries domestic maple plywood combines a 3/4 inch veneer core construction with a white whole piece face and C-3 grade balance, giving cabinet shops a clearly defined hardwood panel for face-critical work. The 48.5 x 96.5 dimensions support efficient layout of tall parts and multiple components on each sheet while preserving trim allowances. With its documented identity as WHT MPL,C/3,19.4mmX4X8,PF1S,VC, this panel can be specified confidently for projects that call for a maple-faced plywood in the plywood hardwoods category. For cabinet, furniture, or interior woodworking jobs that depend on consistent sheet dimensions and face quality, this product offers a defined set of characteristics to build into design, ordering, and cutting plans.
Sold In: 1 Sheet
