Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Maple White Veneer Core defines this sheet as a hardwood plywood panel in a maple, white face, so it serves well where a maple appearance is desired on a structural panel. The 1/2 inch thickness establishes it as a midweight sheet that balances rigidity with manageable weight during handling and machining. The 48.5 x 96.5 panel size gives slightly oversize dimensions relative to a 4 x 8 layout, allowing trimming to final size while still covering standard cabinet and casework spans. The veneer core construction means the interior is built from wood veneers rather than composite, giving a familiar feel when cutting and fastening. The domestic designation ties the product to States Industries production, which supports buyers needing domestically sourced plywood for shop standards or project requirements. The product class of plywood and the maple hardwood category position this sheet for use in woodworking environments that call for a hardwood-veneered panel.
The 1/2 inch thickness on this States Industries plywood sets expectations for weight and stiffness during single-person or team handling in the shop and on site. The 48.5 inch width allows ripping into common cabinet side and shelf sizes while leaving trim margins for squaring cuts, which supports efficient yield from each panel. The 96.5 inch length covers tall cabinet or panel runs and still offers room to trim for clean, square ends after rough cutting. The veneer core build behaves like traditional plywood when clamped or fastened in assemblies, giving installers and fabricators a familiar response when building carcasses, partitions, or other structural components where maple surfaces are needed.
This plywood is identified as Plywood Hardwood Maple, White, placing it among panels aimed at projects needing a maple appearance on both faces. The Grade C-1 designation signals a graded relationship between the two sides, which lets fabricators assign the better face to outward or high-visibility areas and use the reverse where it will be less seen. The plain sliced maple description indicates a slicing method that produces traditional maple face patterns, which matters when aligning grain direction across doors, ends, or large panel fields. The 2-sided satin gloss detail shows that both sides receive a satin gloss level, giving each face a consistent sheen suitable for installations where interior and exterior faces are both exposed. The domestic label and States Industries branding position this veneer core maple panel for work where domestic manufacturing origin is a requirement or preference.
The veneer core construction gives this panel the working characteristics of layered wood veneers, providing predictable screw-holding and machining response compared with many composite cores during repetitive shop operations. The 1/2 inch thickness provides a defined target when setting up dados, rabbets, or edge treatments, so jigs and tooling can be tuned once and run across multiple sheets. The 48.5 x 96.5 dimensions allow layout strategies that take advantage of the oversize format, enabling full parts to be cut with cleanup allowance at edges. The ULEF notation, identifying an ultra low emitting formaldehyde panel, supports specification-driven projects that call out emission-conscious engineered wood products in documentation. The manufacturer part number 5092 and the SAP description WHITE MAPLE,C/C,1/2X4X8,PF2S,VC give precise identifiers that help shops repeat orders for matching material when expanding runs or servicing future work built from the same sheet.
This plywood hardwood maple panel has a 1/2 inch thickness, which sets a consistent build for planning joinery depths, edge profiles, and cabinet layouts across a project run.
The States Industries sheet measures 48.5 x 96.5, giving slightly oversize coverage compared to nominal 4 x 8 panels for trimming to final, square dimensions during fabrication.
This panel uses a veneer core, meaning the interior is built from wood veneers, which supports familiar cutting and fastening behavior in woodworking and cabinet shop workflows.
The Grade C-1 classification defines a graded face and back relationship, helping fabricators choose which side faces outward and which can serve less-visible interior locations.
This plywood is described as 2-sided satin gloss, so both faces present a satin gloss surface level suited to applications where each side remains visible after installation.
The ULEF label identifies this panel as ultra low emitting formaldehyde, which is relevant for projects that reference emission-conscious wood products in their material selections.
This States Industries plywood hardwood maple, white, veneer core sheet brings a 1/2 inch thickness, 48.5 x 96.5 oversize dimensions, and 2-sided satin gloss faces to cabinet and woodworking projects. The Grade C-1 maple faces, domestic origin, and ULEF designation support work where appearance, emission characteristics, and traceable identifiers matter. Using the manufacturer part number 5092 and the SAP description WHITE MAPLE,C/C,1/2X4X8,PF2S,VC helps align future orders to the same material, so ongoing or repeat jobs can be matched to this maple veneer core panel.
Sold In: 1 Sheet
