Berenson Skyline Series 8-13/16" (224 mm) Center to Center Brushed Nickel Pull, - 9206-1BPN-P

Berenson Skyline Brushed Nickel Pull For Cabinets

Berenson Skyline brushed nickel pull is a zinc die cast cabinet handle designed for projects that call for an 8-3/16 inch center to center drilling. This size lets you span wider drawer fronts or doors while keeping hole locations consistent across a run of cabinets. The overall 9-1/4 inch length gives the pull enough hand contact for comfortable use on everyday kitchen, bath, or shop cabinets. Its brushed nickel finish provides a muted metallic look that helps hide fingerprints in regular handling areas. The 5/8 inch width offers a slim profile that sits neatly on face frames and slab fronts without crowding adjacent hardware. With a 1-1/16 inch projection, the pull stands off the surface far enough for a solid grip while staying tight to the door to reduce snag points in busy workspaces.

Key Skyline Series Pull Details For Projects

• The Skyline collection identity ties this pull to a coordinated Berenson series, which helps maintain a consistent look when matching other Skyline handles in the same space.
• Zinc die cast construction provides a solid metal body, which supports regular cabinet use on doors and drawers in residential or light commercial settings.
• The brushed nickel finish offers a subdued metallic appearance, helping hardware blend with common appliance and hinge finishes on typical cabinet installations.
• The 8-3/16 inch center to center measurement sets the drilling pattern, supporting accurate layout when boring for multiple pulls along aligned cabinet faces.
• The 9-1/4 inch overall length gives added hand contact area, which is useful on wider drawers or heavier doors that benefit from a full hand grip.
• The 1-1/16 inch projection from the surface creates clearance for fingers behind the pull, helping users grab the handle without rubbing against the cabinet face.
• The 5/8 inch width keeps the pull visually light, which helps it work on narrow rails or modern slab fronts without overpowering the door design.
• Base dimensions of 1-3/16 inch at each end define the footprint on the door, helping installers plan layout around panel profiles or edge details.
• The supplied 8-32 x 1 inch screws thread directly into the pull, supporting standard cabinet door and drawer front thicknesses common in many woodworking projects.

Practical Mounting Dimensions For Cabinet Layout

This Skyline series cabinet pull centers on an 8-3/16 inch center to center measurement, so installers can set up drilling jigs or CNC programs to that fixed spacing for repeatable runs. With a 9-1/4 inch overall length, the pull slightly overhangs the hole spread at each end, which gives some visual presence beyond the fastener locations on wider fronts. Its 1-1/16 inch projection defines how far it stands off the door, guiding clearance planning near adjacent doors, tall panels, or appliance panels. The 5/8 inch width and 1-3/16 inch base dimensions at each end help with positioning on narrow rails or stile-and-rail profiles where flat bearing surface is limited. The 8-32 x 1 inch screw size matches common cabinet hardware drilling, streamlining installation with standard tools and bits.

Using The Skyline Pull In Cabinet Projects

Where This 224mm Skyline Pull Works Best

The Skyline 224mm center to center pull fits applications that call for an 8-3/16 inch drilling pattern on doors or drawers. Its 9-1/4 inch length makes it well suited to medium and larger cabinet fronts where a longer grip looks proportional to the panel size. The brushed nickel finish pairs with typical brushed nickel hinges and faucets, helping maintain a unified appearance across kitchens, baths, or workrooms using that metal tone. Zinc die cast construction supports use on frequently opened doors and drawers, such as base cabinets near work areas or storage units in shops. The 5/8 inch width allows the pull to sit comfortably on narrow rails of framed cabinets while still providing enough surface to grab. With 1-3/16 inch bases, it nests well at stile intersections or on flat slab fronts without interfering with most panel details.

Details That Support Repeatable Mounting Results

The defined 8-3/16 inch center to center dimension lets installers set up templates or marking jigs once and repeat the same pattern across a full bank of cabinets, reducing layout time and variation from door to door. The 9-1/4 inch overall length offers predictable overhang past the screw locations, which helps when aligning multiple pulls to visual reference lines or door edges. A 1-1/16 inch projection establishes consistent stand-off from the cabinet face, supporting smooth door operation near reveals or tight corners because the grip zone is clearly defined. The 5/8 inch width works cleanly with standard 3 inch or wider rails, allowing installers to position the pull without crowding decorative edges. Using the 8-32 x 1 inch screws supplied for this pull keeps threading and head size consistent, which simplifies driving the fasteners with common cabinet hardware drivers.

Common Questions About The Skyline 224mm Pull

Selecting This Skyline Pull For Your Next Run

The Berenson Skyline brushed nickel pull 9206-1BPN-P combines an 8-3/16 inch center to center drilling, 9-1/4 inch overall length, and zinc die cast construction to support consistent cabinet hardware runs. Its brushed nickel finish, 5/8 inch width, and 1-1/16 inch projection give a predictable look and grip across doors and drawers. For projects where a coordinated Skyline collection and defined dimensions matter, this pull offers clear measurements that line up with standard cabinet fabrication practices.