Berenson Skyline Series Polished Chrome 1-3/8" (35 mm) L x 3/4" (19 mm) W Knob, - 9210-1026-P

Berenson Skyline Chrome Knob For Cabinets

Berenson Skyline chrome knob is a zinc die cast knob in the Skyline Collection with a polished chrome finish, so it provides a consistent look when matching other Skyline Series cabinet hardware on the same job. The knob length of 1-3/8 inches sets a defined gripping surface that feels substantial on cabinet doors or drawers. A 3/4 inch width keeps the profile compact, which helps when knobs are close to door edges or adjacent fronts. The 1-1/16 inch projection spaces fingers away from the cabinet surface, which reduces rubbing and wear around the drill point over time. A base diameter of 3/8 inch creates a small footprint, which is useful when layout lines and narrow stiles leave limited landing area. The design as a knob in the decorative hardware and moldings category fits standard cabinet layouts where a single pull point is preferred.

Key Skyline Series Knob Details For Projects

• The Skyline Collection identity ties this knob to the same series, which simplifies maintaining a unified visual line on multi-room cabinet runs.
• Zinc die cast material provides a solid, predictable body that accepts the polished chrome finish cleanly for a uniform appearance at each pull point.
• The polished chrome finish delivers a bright, reflective surface that coordinates with common chrome faucets and hinges in kitchen and bath spaces.
• A 1-3/8 inch length defines the main face of the knob, giving enough purchase for fingers while staying proportionate to standard cabinet fronts.
• Width of 3/4 inch balances grip and clearance, which helps when knobs are installed near inside corners or tight overlay reveals.
• Projection of 1-1/16 inches sets the working distance from the door, aiding comfortable pulls without overextending into walkways.
• The 3/8 inch base diameter keeps contact to a small circle, which is helpful when working on narrow rails or where existing holes limit repositioning.
• Screw size 8-32 at 1 inch gives a familiar thread and length reference, aligning with common cabinet drilling practices and knob installation steps.

Cabinet Knob Dimensions That Guide Fit

The specified 1-3/8 inch length on this Berenson Skyline knob defines how much of the knob face will show on the cabinet, which helps with planning consistent sightlines across doors and drawers. Its 3/4 inch width sets the side-to-side footprint, which is important when laying out hardware near panel detailing or adjacent knobs. The projection of 1-1/16 inches controls how far the knob stands off the surface, which affects both reach comfort and how far hardware extends into walking paths or tight galley spaces. With a base diameter of 3/8 inch, the contact point to the wood is compact, which supports clean installs on narrow frame members. The 8-32 screw size note on this knob defines the thread interface, which matters when matching to standard cabinet drilling and typical knob mounting holes.

Using The Berenson Skyline Chrome Knob On Jobs

Where This Skyline Series Knob Fits Best

This Berenson Skyline Series cabinet knob sits in the decorative hardware and moldings category, so it aligns with projects where visual detail and finish coordination matter. The polished chrome finish suits layouts that already use chrome fixtures, because the knob surface mirrors nearby metalwork for a cohesive line. With its 1-3/8 inch length and 3/4 inch width, the knob scales well to typical cabinet doors and drawers, letting installers repeat the same part across uppers, lowers, and islands. The compact 3/8 inch base allows positioning on narrow rails and stiles, helping when frame dimensions leave limited landing real estate. As a Berenson Corporation product with part number 9210-1026-P, it provides a specific reference when matching installed hardware on service calls or future cabinet additions.

Details That Support Consistent Hardware Layout

The 1-1/16 inch projection on the Skyline Series knob creates a consistent hand clearance from the cabinet face, which aids in repeating drill patterns without adjusting for reach from one elevation to another. Length of 1-3/8 inches keeps the visual mass similar across a wide run, which is useful when aligning knobs with existing centerlines or appliance trims. The 3/4 inch width works with the projection to define the overall volume of the knob, helping prevent crowding between neighboring doors in tight banks. Zinc die cast construction gives the knob a defined shape with crisp edges, which supports precise visual alignment when installers set rows by eye against rails and panels. The polished chrome finish also reflects light consistently across the knob face, which helps finished cabinet faces read uniformly under task and ambient lighting.

Common Questions About The Skyline Series Knob

Selecting This Chrome Knob For Cabinet Work

The Berenson Skyline chrome knob combines a defined 1-3/8 inch length, 3/4 inch width, and 1-1/16 inch projection with a polished chrome finish, so it gives cabinets a consistent look and hand feel. Its zinc die cast construction and 3/8 inch base diameter work well across typical cabinet frame sizes. With the Skyline Collection identity and part number 9210-1026-P, it offers a clear choice when a matching polished chrome cabinet knob is needed on new installations or follow-up projects.