Berenson Oak Park Series Verona Bronze 1-1/8" (29 mm) L x 1-1/8" (29 mm) W Knob, - 9218-10VB-P

Berenson Oak Park Knob For Cabinet Projects

Berenson Oak Park knob identifies this knob as part of the Oak Park collection from Berenson Corporation, so it matches other Oak Park decorative hardware when keeping a job visually consistent. The knob measures 1-1/8 inch in length and 1-1/8 inch in width, giving a balanced, square-style footprint that fits comfortably on typical cabinet doors or drawers. A base diameter of 9/16 inch concentrates the contact area, which helps the knob sit neatly on the cabinet surface without overhanging face frames. The projection of 1-1/4 inch provides finger clearance from the door face, which matters when users are gripping doors regularly in kitchens, baths, or shop cabinetry. The knob is produced from zinc material, providing a solid metal construction that supports everyday cabinet use. A Verona Bronze finish defines the color tone, aligning this knob with Verona Bronze hinges or pulls when coordinating hardware on the same installation.

Key Verona Bronze Cabinet Knob Details

• The knob belongs to the Oak Park collection, which helps installers match this piece with other Oak Park parts on the same cabinetry run for a unified appearance.
• The Verona Bronze finish sets a specific bronze color, allowing this knob to align with existing Verona Bronze decorative hardware on cabinets for consistent visual results.
• The 1-1/8 inch length and width give the knob a compact, square-like size that fits standard cabinet stiles and rails without crowding adjacent hardware or trim.
• The 9/16 inch base diameter limits the footprint at the mounting point, which helps the knob seat cleanly on narrow rails or smaller drawer fronts while still covering the drilled hole.
• The 1-1/4 inch projection positions the gripping surface away from the door face, improving everyday hand clearance and reducing contact with finished cabinet surfaces during use.
• The knob is made from zinc, providing a metal construction that supports repeated pulling forces on cabinet doors and drawers in residential or light commercial settings.
• The manufacturer part number 9218-10VB-P identifies this exact size and finish, which matters when reordering or matching existing Berenson Oak Park Verona Bronze installations.

Cabinet Knob Fit, Dimensions, And Mounting Use

This Verona Bronze cabinet knob uses a standard screw interface, and the specified 8-32 x 1 inch screw size points to a common cabinet mounting thread used on many doors and drawers. With a 1-1/8 inch length and width, the knob is sized for typical cabinet layouts, positioning the gripping point near the center of narrow drawer fronts or door rails. The 9/16 inch base diameter aligns well with standard drilled knob holes, so the knob covers the bore while avoiding interference with adjacent edges. Its 1-1/4 inch projection moves the gripping area out from the door surface, supporting fingers when pulling heavier drawers or fully loaded cabinet doors. Together, these dimensions define how the knob will sit and function on finished cabinetry, which matters when planning hole locations and overall hardware spacing on a project.

Using This 1-1/8 Inch Verona Bronze Knob

Where This 1-1/8 Inch Cabinet Knob Fits

This 1-1/8 inch cabinet knob is categorized under decorative hardware and moldings in the knobs class, so it is suited to cabinet doors and drawers where a finished decorative pull point is required. The square-like 1-1/8 inch by 1-1/8 inch profile works on standard kitchen, bath, or built-in cabinets where hardware needs to stay within typical stile and rail dimensions. With a 9/16 inch base diameter, the knob can sit on narrower drawer faces without overlapping panel details, supporting use on smaller fronts as well as full-size doors. The 1-1/4 inch projection creates a defined gripping depth off the face, which supports daily operation of cabinets in functional work areas such as kitchens or shop storage. As part of the Berenson Oak Park collection, this knob fits projects where the Oak Park style is already in use or specified.

How Design And Finish Support Consistent Results

The Oak Park Series designation ties this knob to a broader family of Berenson hardware, so installers can select matching pulls or other Oak Park pieces for cohesive visual results across a room. The Verona Bronze finish provides a defined bronze tone, which supports projects where Verona Bronze is called out in plans or used on existing hinges and other decorative parts. Zinc construction gives the knob a metal body that supports repeated gripping, helping the hardware maintain its function under regular opening and closing cycles. The 1-1/8 inch length and width help position the knob comfortably at common install heights, which can reduce awkward reach points on tall or base cabinets. Its 1-1/4 inch projection separates fingers from the door face during pulls, which can reduce contact with finished surfaces and support finish longevity in busy environments.

Common Questions About Berenson Oak Park Knob Use

Selecting This Verona Bronze Knob For Your Job

This Verona Bronze cabinet knob from the Berenson Oak Park Series combines a 1-1/8 inch square-style profile, 9/16 inch base, and 1-1/4 inch projection to support practical gripping on cabinet doors and drawers. Zinc construction with a Verona Bronze finish aligns this knob with projects calling for metal decorative hardware in that specific tone. With a standard 8-32 x 1 inch screw size interface and clearly defined dimensions, this knob is suited to cabinet installations where matching Oak Park style and Verona Bronze color are key selection factors.