
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Oak Park cabinet knob identifies this piece as part of Berenson Corporations Oak Park Series, so installers get a consistent style match across that collection. The knob is made from zinc, which provides a solid metal body that stands up to regular cabinet use. Its Vintage Nickel finish gives a muted metallic look that works in both traditional and transitional projects. The knob length is 1-1/8 inches, so it suits standard cabinet doors or small drawers where a compact grip is preferred. The knob width is also 1-1/8 inches, creating a balanced square footprint that looks proportional on face frames. A base diameter of 9/16 inch keeps the contact point tight to the surface, helping the knob sit cleanly on doors and drawer fronts. Projection is 1-1/4 inches, giving fingers enough clearance to pull comfortably without crowding neighboring hardware.
This Oak Park Series knob uses a screw size of 8-32 by 1 inch, giving installers a standard machine-screw thread commonly used in cabinet hardware. With a length or diameter listed as 1-1/8 inch, the knob presents a compact front face that works well on face-frame cabinetry or frameless doors where space is at a premium. The 9/16 inch base diameter concentrates load around the drilled hole, which helps the knob sit flush when tightened. Projection of 1-1/4 inches creates a comfortable hand clearance from the cabinet surface, supporting smooth operation on doors and drawers set close together. The matching 1-1/8 inch width further defines the visible footprint, so layout planning for multiple knobs stays predictable across a run of cabinets.
The Oak Park Series designation signals that this knob belongs to Berenson Corporations coordinated decorative hardware line, making it suitable where a unified look is needed on cabinet doors and drawers. As a knob categorized under Decorative Hardware & Moldings and Knobs, it fits typical kitchen, bath, and built-in cabinet applications. Its 1-1/8 inch length and width mean it suits doors and drawers that benefit from a compact square-style pull point, especially on narrower fronts. The Vintage Nickel finish lets the knob pair with other nickel-toned components, so it can be used in spaces where a softer, aged nickel appearance is desired. The 9/16 inch base diameter creates a modest footprint around the mounting hole, which can be helpful when working near panel edges or decorative profiles.
The 1-1/8 inch by 1-1/8 inch size gives installers a known front face to work with, allowing consistent centerline spacing when laying out multiple knobs across a cabinet bank. A projection of 1-1/4 inches establishes a repeatable stand-off from the door or drawer, so clearances between facing cabinets remain uniform. The 8-32 by 1 inch screw size uses a familiar thread and length that aligns with standard cabinet door thicknesses, helping installations follow predictable drilling and fastening routines. The 9/16 inch base diameter focuses bearing around the screw hole, which can support an even compression of the knob against the surface once tightened. Taken together, the zinc construction, Vintage Nickel finish, and defined measurements give hardware installers and serious DIY users a predictable component that fits into typical decorative cabinet hardware layouts.
The knob length is 1-1/8 inches, width is 1-1/8 inches, base diameter is 9/16 inch, and projection is 1-1/4 inches, which together define its compact, easy-to-grip profile on cabinet fronts.
The knob is made from zinc with a Vintage Nickel finish, combining a metal body with a muted nickel appearance suited to decorative cabinet applications.
This product is part of the Oak Park Series from Berenson Corporation, which helps match it with other Oak Park decorative hardware pieces on the same project.
The knob uses an 8-32 by 1 inch screw size, matching a common cabinet hardware thread and length for mounting through standard door and drawer fronts.
Projection is 1-1/4 inches from the cabinet surface, giving enough room for fingers to grip and pull doors or drawers in everyday use.
The manufacturer part number is 9219-1VTN-P, which identifies this exact Oak Park Series Vintage Nickel 1-1/8 inch knob from Berenson Corporation.
The Berenson Oak Park cabinet knob in Vintage Nickel combines zinc construction with defined measurements, giving installers a known part that fits standard cabinet doors and drawers. With its 1-1/8 inch by 1-1/8 inch face, 9/16 inch base diameter, and 1-1/4 inch projection, it delivers a compact, practical grip point on fronts. The 8-32 by 1 inch screw specification supports straightforward mounting into typical cabinet layouts. For projects built around Berenson Corporations Oak Park Series and a Vintage Nickel finish, this knob offers a consistent, cataloged option ready to use on decorative hardware runs.