Berenson Oasis Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 9252-1BPN-P

Berenson Oasis Brushed Nickel Pull For Cabinets

Berenson Oasis brushed nickel pull is a zinc die cast cabinet handle designed for projects that need a 6-5/16 inch (160 mm) center to center drill layout. This fixed center dimension sets precise hole spacing, which supports predictable drilling on cabinet doors and drawer fronts. The overall 7-5/16 inch length gives the pull visual presence across wider drawer faces, helping tie multiple fronts together in a straight line. A 1-1/16 inch projection sets the gripping space off the cabinet surface, providing hand clearance while keeping the handle close enough to the face for a compact profile. The 13/16 inch width provides a stable gripping surface, which helps when opening loaded drawers. Brushed nickel finish tones down reflection, which supports a consistent look across banks of cabinets under varied lighting. Matching base dimensions at 11/16 inch help the feet sit cleanly on cabinet faces for an even, finished appearance.

Key Details That Shape Daily Cabinet Use

• The 6-5/16 inch center to center measurement defines fixed hole spacing, which simplifies layout when repeating the same pull across multiple doors and drawers on a run of cabinets.
• The 7-5/16 inch overall length extends beyond the drilled holes, which visually balances wider drawer fronts and creates a more substantial gripping area for everyday opening and closing.
• The 1-1/16 inch projection sets how far the pull stands off the face, creating finger clearance while helping drawers and doors stay close to their fronts for a tight, modern appearance.
• The 13/16 inch width gives the pull a comfortable face to grab, which supports a steady grip when pulling heavier cabinet drawers or tall pantry doors.
• The 11/16 inch base dimensions at each end define the footprint against the cabinet surface, which aids in covering minor imperfections around drilled holes and keeping the pull seated neatly.
• The zinc die cast material provides a solid metal construction, which supports a consistent feel across a full kitchen or shop install when many pulls are used side by side.

Installation Layout And Fit For Oasis Pull

The Oasis 160mm center to center pull is built around a 6-5/16 inch drilling pattern that guides cabinet preparation. This defined spacing lets installers set up jigs or drilling templates once and repeat the pattern across an entire job, improving consistency. With a 7-5/16 inch overall length, the ends extend slightly beyond the hole centers, which can help align the pull by eye relative to door and drawer edges. The 1-1/16 inch projection controls how far hands sit from the cabinet face, helping users get fingers behind the pull without excessive stand-off. The 11/16 inch base dimensions locate the pull feet precisely on the surface, which helps align multiple pulls in straight horizontal or vertical runs on banks of cabinetry.

Using The Oasis 160mm Pull In Cabinet Projects

Where This Berenson Oasis Pull Fits Best

This Berenson Oasis Series 6-5/16 inch center to center brushed nickel pull fits cabinet layouts that are planned around a 160 mm drilling spread. That fixed measurement works well on kitchen, bath, or shop cabinets where repeated spacing is important over long runs of doors and drawers. The 7-5/16 inch overall length suits medium and wider drawer fronts, giving enough bar length for a centered hand grip even on broader faces. With a 13/16 inch width and 1-1/16 inch projection, the pull offers a defined gripping profile that works on wall cabinets, base cabinets, and tall units using the same handle style. The brushed nickel finish aligns with projects calling for a muted metal tone that coordinates with other brushed nickel cabinet hardware in the same space.

Details That Support Consistent Results And Layout

The defined 6-5/16 inch (160 mm) center to center spacing on the 9252-1BPN-P cabinet pull supports repeatable drilling, so installers can rely on a single jig for all matching fronts. Zinc die cast construction keeps each pull within consistent size and shape tolerances, which helps doors and drawers line up visually when installed in grids or stacked banks. The 11/16 inch base dimensions create a predictable footprint on the cabinet face, aiding in aligning the pull relative to stile or rail edges for clean sight lines. A 1-1/16 inch projection standardizes hand clearance across all cabinets in the run, which helps users experience the same feel whether opening a small wall cabinet door or a heavy base drawer. The 13/16 inch width remains constant from pull to pull, supporting a uniform appearance in both residential and commercial woodworking applications supplied through Wurth Baer Supply.

Common Questions About This Oasis Cabinet Pull

Select This Oasis Pull For 160mm Layouts

The Berenson Oasis brushed nickel pull with 6-5/16 inch (160 mm) center to center spacing suits cabinet runs designed around metric or 160 mm drilling patterns. Its 7-5/16 inch overall length, 1-1/16 inch projection, and 13/16 inch width work together to deliver a comfortable, consistent grip across drawers and doors. Zinc die cast construction and defined 11/16 inch base dimensions support uniform alignment where multiple pulls are installed. For projects sourced through Wurth Baer Supply, this pull provides a clear, measured option when a brushed nickel finish and 160 mm layout are specified.