Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Oasis knob 1-1/4 inch brushed nickel identifies this Berenson Corporation knob as a 1-1/4 inch diameter pull in a brushed nickel finish, which gives cabinet doors or drawers a consistent, contemporary look across a run of cabinets. The Oasis collection designation ties this round knob to Berenson's Oasis Series, helping match it visually with other pieces from the same family on a project. The zinc material construction provides a solid-feeling knob body that supports repeated daily operation on residential or light commercial cabinetry. A 1-1/4 inch overall width combined with a 5/8 inch base diameter creates a compact footprint that fits comfortably on standard cabinet face frames or drawer fronts. The 1-1/16 inch projection brings the gripping surface away from the door or drawer face, allowing fingers to get behind the knob without rubbing the surface during normal use.
The Oasis knob uses a width, or diameter, of 1-1/4 inch, which lets installers center it on standard cabinet rails without overlapping raised panel details. The 5/8 inch base diameter focuses the bearing surface into a small circle, which seats firmly over standard drilling holes on cabinet faces. The knob's 1-1/16 inch projection sets the gripping point away from the cabinet, which provides clearance for fingers even on thicker drawer fronts. The stated screw size of 8-32 x 1 inch defines the thread and length, which aligns with common cabinet knob installation practices using 8-32 machine threads through the door or drawer front. This combination of diameter, base size, projection, and screw thread supports straightforward layout, drilling, and tightening on new builds or replacements.
The 1-1/4 inch, or 32 mm, diameter of the Berenson Oasis knob suits standard cabinet doors and drawers where a single round pull is specified, keeping the scale appropriate for kitchen, bath, or utility cabinetry. The brushed nickel finish pairs with other brushed nickel decorative hardware, aligning the knob visually with hinges or drawer pulls in the same color family across a room. The zinc material body supports repeated grasping on frequently opened doors, making the knob suitable for upper and lower cabinets that see daily cycles. The compact 5/8 inch base diameter lets the knob sit comfortably on narrow face-frame rails near panel transitions, which helps when hardware locations are close to decorative profiles or door edges.
The Oasis knob's 1-1/4 inch width and matching length or diameter give installers a clear centerline to work from, which simplifies measuring and drilling consistent hole locations across multiple cabinet fronts. The 1-1/16 inch projection defines how far the knob extends from the surface, which helps plan clearances where doors open near walls, adjacent cabinets, or appliances. The 5/8 inch base diameter keeps the knob footprint modest, which reduces interference with raised panel edges or molded profiles while still covering the drilled hole cleanly. The specified 8-32 x 1 inch screw size sets an expected screw engagement depth, which helps standardize drilling through typical cabinet door or drawer thicknesses when using this knob throughout a job. Together, these dimensions support repeatable layouts that keep sightlines straight and hardware alignment consistent from cabinet to cabinet.
The Berenson Oasis knob has a 1-1/4 inch (32 mm) diameter and 1-1/4 inch width, which fits standard cabinet doors and drawers without overpowering narrow rails.
The Oasis knob projects 1-1/16 inch from the cabinet surface, which provides finger clearance behind the knob while keeping hardware tight to the door or drawer front.
The Oasis 9255-1BPN-P knob is made from zinc material, which creates a solid metal body suitable for regular cabinet door and drawer use.
The Berenson Oasis cabinet knob uses a brushed nickel finish, which delivers a subdued metallic look that coordinates with other brushed nickel decorative hardware.
The Oasis knob is specified with an 8-32 x 1 inch screw size, which matches common cabinet knob mounting threads and length for typical door and drawer thicknesses.
The Oasis brushed nickel knob has a 5/8 inch base diameter, which provides a compact contact area that sits cleanly on standard cabinet face frames.
The Berenson Oasis Series brushed nickel knob with a 1-1/4 inch diameter, 5/8 inch base, and 1-1/16 inch projection offers a balanced size for typical cabinet doors and drawers. The zinc construction and brushed nickel finish align with many modern cabinet hardware schemes. The defined 8-32 x 1 inch screw specification, combined with the stated dimensions, supports predictable layout and installation on new cabinetry or when updating existing fronts. For cabinet runs that call for a compact, round brushed nickel knob from an established brand, this Oasis model provides a consistent option across multiple openings.
Sold In: 1 Each
