Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Air-Pro 06E SUS is a professional-grade ventilator power pack with an exterior blower, designed to clear smoke, steam, and cooking odors from high-BTU cooktops when installed inside a compatible wood range hood.
Most residential ventilators top out well below 1,000 CFM, which is enough for a standard four-burner range. A professional-style cooktop running multiple high-BTU burners simultaneously generates far more heat, smoke, and vapor than a standard unit can handle. The 06E SUS moves up to 1,400 CFM and is rated for cooktops up to 150,000 BTU/h, so it keeps pace with the cooking load rather than falling behind it. The exterior blower placement routes the motor outside the kitchen, which reduces the mechanical noise that a powerful in-line blower would generate directly overhead. This matters most in open-plan kitchens and great rooms where a loud overhead motor at full speed would carry across the space.
The Stainless Steel finish on this unit suits kitchens where the appliances are already stainless and the design language is clean and professional. Because the power pack installs inside the wood hood shell, only the liner face and control surface are visible to the room. The stainless finish coordinates with the visible hardware rather than fighting it. The dishwasher-safe filter handles the routine grease load that accumulates with frequent high-heat cooking, and the halogen light is built into the unit so the cooking surface stays well lit without a separate fixture.
This power pack suits a kitchen where a custom wood range hood is already specified or built, and where the cooktop demands ventilation well above what a standard residential insert can deliver. It is the right choice for a designer or contractor pairing a wood hood shell with a professional-style range, or for a cabinet shop building a custom hood that needs to house serious ventilation hardware. The unit dimensions are 26-5/8 inches wide by 16-5/8 inches deep by 10-1/2 inches tall, with a hole size of 25 by 15-3/4 inches; confirm the shell and liner dimensions against these figures before ordering. The ventilator is the air-moving component. The decorative wood hood shell and any required liner are separate products.
An exterior blower mounts the motor outside the kitchen, typically in an attic, wall cavity, or exterior wall, so the mechanical noise from the blower stays out of the living space. At 1,400 CFM, that noise reduction matters more than it would at lower airflow ratings.
No. This is the ventilator power pack only. The decorative wood hood shell and any required liner are separate products. Confirm compatibility between the shell, liner, and this unit before ordering.
This is a ducted ventilator. It moves air out of the kitchen through ductwork connected to an exterior blower. It is not a recirculating unit.
It is rated for cooktops up to 150,000 BTU/h, which covers professional-style residential ranges and higher-output commercial-grade cooktops. For a standard residential range in the 40,000 to 60,000 BTU range, a lower-CFM unit will typically suffice.
When the cooktop is built for serious output, the ventilation needs to match it. The 06E SUS in Stainless Steel delivers the airflow capacity and exterior blower design to handle a high-BTU kitchen without compromise.