Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Red oak plywood 3/4 inch from States Industries is a domestic hardwood veneer core panel designed for projects that call for a red oak face and back with a plywood core. The panel uses a two step layup process in which the inner plies are first laminated onto a blank, so the base structure is built before the face is applied. During this step any surface knots or slips in the inner plies are puttied, which creates a flatter base and reduces telegraphing into the face veneer during finishing. The blank is then sanded and overlaid with face and back veneers, so the red oak surfaces sit on a smooth, even platform. This process ensures smoothness of the surface and consistency of the panel thickness, which supports cleaner machining, better glue-line contact, and more predictable alignment in cabinet and furniture assemblies.
The western fir veneer core in this plywood forms a multi-ply structure, so saws and routers engage alternating grain plies rather than a composite slab. That behavior supports predictable chip-out control and familiar feed rates when cutting cabinet sides, tops, and shelves. Because inner plies are laminated, sanded, and then overlaid with face and back veneers, the panel thickness stays consistent from edge to edge, which matters when setting up dados, grooves, or CNC programs that depend on repeatable material dimensions. The A-1 grading on red oak faces means layout can prioritize the A face toward visible directions while still relying on a serviceable back, which supports straightforward orientation during assembly. With unfinished faces, shop finishing systems can be applied as part of the same workflow used for other red oak components.
This plywood hardwood veneer core, domestic oak, red, rotary, unfinished 3/4 inch thickness panel is suited to jobs that benefit from a real red oak face over a plywood core. The A-1 grade aligns with cabinet, fixture, and furniture work where one face is the primary show surface. The 48.5 x 96.5 inch size supports ripping full-length cabinet sides and tall panels from a single sheet, which helps keep grain direction and color consistent across large runs. Because the core is western fir veneer, the panel feels and responds like traditional plywood when cutting joinery, adding edge banding, or building structural case parts. In shops set up around domestic hardwood plywood, this product fits existing layouts, tooling, and handling routines without special adjustments.
The two step layup process means inner plies are first laminated into a blank and surface knots or slips are puttied before faces are applied, so imperfections in core plies are addressed away from the finished red oak surface. When that blank is sanded and then overlaid with face and back veneers, the result is improved smoothness of the surface, which supports even stain absorption and consistent appearance across wide panels. Consistency of the panel thickness follows from building and sanding the blank first, and that thickness stability improves the fit of dadoes, rabbets, and shelf pins across all parts cut from the sheet. For installers and fabricators, this consistency reduces rework due to tight or loose joints tied to variable panel thickness, helping parts align more reliably within a run of cabinets or fixtures.
The plywood uses a western fir veneer core, so the interior is built from fir plies, giving the panel a traditional plywood structure for machining and fastening in cabinet and woodworking jobs.
The two step layup process putties knots or slips in inner plies, sands the blank, then adds face and back veneers, which ensures surface smoothness useful for uniform finishing results.
The A-1 grade provides a primary A-grade red oak face and a 1-grade back, supporting applications where one side is the main show surface and the opposite side is secondary but workmanlike.
The 48.5 x 96.5 inch size is slightly oversize compared to 4 x 8, allowing trimming edges clean while still yielding full-size cabinet and panel components from one sheet layout.
Consistent thickness, produced by sanding the laminated blank before veneering, supports accurate dado depths, tight joinery, and more predictable fits across multiple cut parts.
The red oak faces are unfinished, so shop-applied stains, clear coats, or paint systems can be used to coordinate this sheet with other red oak components in the same project.
This States Industries red oak, rotary-cut plywood combines a western fir veneer core with an A-1 red oak face and back, giving a cabinet-oriented sheet ready for machining and shop finishing. The two step layup and sanded blank deliver smooth faces and consistent thickness, supporting accurate joinery and dependable part alignment. With its oversize 48.5 x 96.5 inch dimensions and 3/4 inch thickness, this panel fits common cabinet, fixture, and furniture work where a domestic red oak plywood sheet is required. Choose this panel when a hardwood veneer core red oak sheet aligns with your next project run.
Sold In: 1 Sheet
