Choose the right ironing board cover
Rev-A-Shelf ironing board cover is a replacement ironing board cover made for CIB and VIB Series applications from Rev-A-Shelf. This VIB ironing board cover is identified as the RAS-VIB-COVER-52 and is described as a replacement cover for VIB-20CR. Buyers replacing a worn ironing surface can use this VIB series cover to restore the board covering without replacing the full ironing board assembly. The verified product data lists this item in Rev-A-Shelf vanity cabinet products and vanity drawer systems, which helps buyers match it to the correct cabinet accessory family. If you are searching for a VIB-20CR cover or a CIB and VIB series cover, this product is sold as an individual replacement cover, while ironing boards are sold separately.
See how this replacement cover helps
- Rev-A-Shelf replacement ironing board cover - Helps buyers replace a worn board cover while keeping the existing ironing board assembly in service.
- Fits CIB and VIB Series applications - Supports buyers who need a replacement cover matched to the verified Rev-A-Shelf series reference.
- Identified for VIB-20CR - Gives installers a direct model reference to check before ordering a VIB-20CR cover.
- Sold as each - Makes it easier to order the exact quantity needed for one replacement job or service call.
- Ironing boards sold separately - Clarifies that this product is a replacement cover only, not a complete ironing board unit.
- Listed in vanity cabinet products - Helps cabinet and bath buyers place the cover within the correct Rev-A-Shelf application category.
- Product dimensions of 11-4/5 inch W x 37-13/16 inch D x 1 inch H - Provides size data buyers can compare with the existing board or cabinet setup before purchase.
- Rev-A-Shelf brand part RAS-VIB-COVER-52 - Gives a specific manufacturer reference for reordering, service work, and fit verification.
Confirm fit and included cover details
Key specs to confirm: This replacement cover is associated with the Rev-A-Shelf VIB Series and is described for VIB-20CR, with product dimensions listed as 11-4/5 inches wide, 37-13/16 inches deep, and 1 inch high. Before ordering, confirm the existing ironing board series, the manufacturer part reference, and whether your application is from the CIB or VIB Series. Buyers should also compare the listed dimensions to the board being serviced and verify that the intended cabinet or vanity setup matches the existing installation. Safety, load, compliance, and any installation hardware details are not provided in the verified data and should be confirmed through manufacturer documentation if needed.
What's included: One replacement ironing board cover, sold as each. Ironing boards are sold separately.
What to verify before ordering: Confirm that your board is a compatible Rev-A-Shelf CIB or VIB Series unit, check whether you need the replacement cover only rather than a full board, match the part number RAS-VIB-COVER-52 to your service requirement, and compare the listed width and depth to the board already installed.
Use this ironing board cover confidently
Match the replacement cover to use
A replacement ironing board cover is typically ordered when the existing ironing surface shows wear, staining, or general age, but the board itself still works correctly. In that situation, a buyer does not always need to replace the full ironing board assembly. This Rev-A-Shelf ironing board cover gives cabinet installers, service technicians, and repair-focused homeowners a way to order a replacement cover only, which can simplify maintenance on an existing setup.
This product is especially relevant for buyers working with a VIB-20CR cover requirement or a known CIB and VIB series cover application. The verified product data states that replacement ironing board covers are available for CIB and VIB Series boards, and that ironing boards are sold separately. That distinction matters during ordering because many buyers search for an ironing board replacement cover while others may actually need the complete board. If the board frame and mounting arrangement remain in usable condition, a replacement cover for ironing board service may be the more direct purchase.
The listed dimensions, 11-4/5 inches wide by 37-13/16 inches deep by 1 inch high, give buyers a practical starting point for confirming fit. For a cabinet accessory like this, exact series match is still important. A buyer should compare the existing board, review any labels or prior order records, and confirm that the application is tied to the Rev-A-Shelf VIB Series or another compatible series named in the verified description. If the current board has been modified, re-covered previously, or installed in a custom vanity layout, the buyer should verify measurements and product references before placing the order.
This item also sits within Rev-A-Shelf vanity cabinet products and vanity drawer systems, which helps trade buyers identify the product family when sourcing replacement parts for bath or cabinet projects. For service work, that category reference can make it easier to keep replacement parts aligned with the original cabinet accessory system.
Compare replacement cover options with care
When buyers compare replacement covers, the main difference is often not appearance but confirmed compatibility. A generic ironing board replacement cover may look similar in photos, yet the safer buying approach is to match the replacement cover to the correct brand, series, and model reference when those details are available. Here, the verified data gives a clear Rev-A-Shelf brand reference, the RAS-VIB-COVER-52 part number, and a direct connection to VIB-20CR and to CIB and VIB Series applications.
That kind of product identification supports more consistent ordering for installers and purchasing teams. Instead of relying on rough size estimates alone, buyers can use the product dimensions together with the series information to narrow the fit check. This is useful in maintenance departments, cabinet shops, and remodel work where replacement parts need to match an existing system already in place.
Another practical point is that this product is sold as each and the ironing board is sold separately. That helps avoid confusion between a replacement cover and a full ironing board assembly. Buyers comparing options should confirm whether they need only the fabric cover component or the complete board setup. They should also confirm whether any attachment method, pad detail, or installation steps are specified in current manufacturer guidance, because those details are not included in the verified product data provided here.
For buyers who value straightforward reordering, the Rev-A-Shelf product identity and the specific manufacturer part number can be more useful than broad category language. Matching the exact replacement cover to the existing board application is the clearest way to reduce ordering errors and service delays.
Check common ironing board cover questions
What does this Rev-A-Shelf ironing board cover replace?
This Rev-A-Shelf ironing board cover is described as a replacement cover for VIB-20CR and for CIB and VIB Series ironing board applications.
Is this a complete ironing board assembly?
This replacement ironing board cover is not a complete ironing board. The verified description states that ironing boards are sold separately.
Will this fit any ironing board in my vanity?
This VIB series cover should be matched to the correct Rev-A-Shelf series and model reference. Confirm your existing board is from the CIB or VIB Series before ordering.
What dimensions should I check before ordering?
This replacement cover is listed at 11-4/5 inches wide, 37-13/16 inches deep, and 1 inch high. Compare those measurements to your existing board setup.
Does the package include mounting hardware?
This product is verified as a replacement cover only. Hardware details are not provided, so confirm included components before ordering if your project depends on them.
How is this product sold?
This Rev-A-Shelf replacement ironing board cover is packed and sold as each.
Can I use this for a CIB Series board?
This replacement cover is described for CIB and VIB Series applications. Confirm the exact board model and dimensions before ordering.
What should I verify for installation?
This ironing board replacement cover should be checked for series match, dimensions, and existing board condition. Follow manufacturer installation guidance and local building requirements where applicable.
Is this part listed under vanity cabinet products?
This Rev-A-Shelf product is listed in vanity cabinet products and vanity drawer systems in the verified product data.
Order the correct replacement cover today
Replacement ironing board cover purchases go more smoothly when the board series, dimensions, and included components are confirmed first. This Rev-A-Shelf part is sold as one replacement cover, not as a complete ironing board, so buyers should match it to the existing CIB or VIB Series application and verify the VIB-20CR reference where applicable. Review the listed 11-4/5 inch width and 37-13/16 inch depth, confirm the manufacturer part number RAS-VIB-COVER-52, and make sure your job calls for the cover only before placing the order.
