Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM pullout mounts at the top of the carriage and rides on full-extension, soft-close slides, putting a covered silver trash bin behind a base cabinet door in a face-frame kitchen.
Top-mount waste pullouts make the most sense in a base cabinet where the drawer stack above is shallow or where sink plumbing leaves the lower cabinet interior mostly open. Because the carriage hangs the bin from the top rather than sitting it on the floor, there is usable clearance below for plumbing lines or cleaning supplies. This SKU is designed specifically for face-frame cabinets and needs a minimum opening width of 14-1/2 inches, a minimum opening height of 19-3/4 inches, and a minimum opening depth of 21-3/4 inches. Those three numbers are what to measure before ordering.
The carriage is built from maple, a hardwood that takes paint and stain cleanly and holds up to the daily cycle of the pullout better than particleboard alternatives. The 35 quart silver bin lifts out of the carriage for emptying. Soft-close, full-extension slides support a 150 pound load rating across the unit and handle both directions: the bin extends fully so nothing is buried at the back, and the close is damped so the door does not bang shut on a loaded bin. The door-mount bracket connects the bin's travel to the cabinet door, so opening the door brings the bin forward in one motion.
Cabinet shops specifying a clean single-bin waste solution for a 15-inch base cabinet will find this the right fit, both for the opening dimensions and for the maple finish that pairs with a painted or stained interior. Designers working on a kitchen remodel where the trash location is a narrow cabinet next to the range or sink will appreciate that the top-mount geometry keeps the floor clear. Homeowners replacing an older wire pullout will find the soft-close slides a meaningful upgrade in daily use. For a two-bin trash and recycling setup in a wider cabinet, the double-bin variants in this series are the better starting point.
No. This unit is designed for face-frame cabinet construction. If your cabinet is frameless, look for a Rev-A-Shelf variant specifying frameless compatibility.
The source data does not confirm a lid ships with this unit. Check the product detail for included components, or contact us to confirm before ordering if a lid is required.
Door-mount means the bin carriage connects to the cabinet door so both move together when you open the door. The door-mount bracket is part of this unit's configuration; confirm from the included hardware list whether additional hardware is needed for your door style.
The unit is rated to 150 pounds, which covers a fully loaded 35 quart bin and then some.
This top-mount pullout keeps a 35 quart trash bin out of sight in a 15-inch face-frame cabinet, with soft-close slides and a maple carriage built to handle daily use in a working kitchen.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RS4WCTM-RM-1850DM1 Mfr# 4WCTM-RM-1850DM-1 | Rev-A-Shelf 4WCTM 15-1/4" Maple 1-50 Quart Top-Mount Waste Pullout with Silver Bin and Soft-Close Slides, 4WCTM-RM-1850DM-1 |
