Rev-A-Shelf 4WCTM 18" Maple 2-35 Quart Top-Mount Waste Pullout with White Bins and Standard Slides, 4WCTM-21DM2

An 18-Inch Maple Top-Mount Waste Pullout for a Full-Width Face-Frame Base Cabinet

This Rev-A-Shelf 4WCTM pullout brings two 35 quart white waste bins out of a base cabinet through a top-mount carriage designed for face-frame construction, keeping trash and recycling tucked behind a door and off the kitchen floor.

Key Features

• Two 35 quart white bins included give a combined 70 quarts of capacity for separating trash and recycling in one cabinet.
• Top-mount maple carriage mounts above the bins for a clean open-top access when the door swings.
• Full-extension slides roll the carriage completely out so both bins are fully accessible, not just the front one.
• Door-mount compatible so both bins travel with the cabinet door on a single pull.
• Face-frame cabinet fit with a minimum opening of 18 inches wide, 22-3/4 inches deep, and 18-11/32 inches tall.
• 150 pound weight capacity across the carriage handles two loaded bins without strain on the slides.

Trash and Recycling, Together in One Pull

Separating waste and recycling usually means two bins competing for floor or under-sink space. This double-bin pullout consolidates both into a single base cabinet bay. Pull the door and the whole carriage extends, putting both bins within reach at once. The full-extension slides bring the rear bin forward so it is just as reachable as the front one, which is the practical difference between a single-pull that works and one that only works halfway.

The top-mount design keeps the bin openings unobstructed, so loading is straightforward: drop waste in without navigating a side rail or partial cover. Each bin lifts out independently for emptying and for cleaning the carriage underneath.

Maple Carriage, White Bins, Standard Slides

The carriage is maple, a natural wood finish that reads cleanly inside the cabinet and holds up to the daily handling a waste pullout gets. The two bins are white, a neutral that shows lining changes clearly and coordinates with most cabinet interiors. The slides are standard full-extension, sized to the 150 pound capacity of the loaded double-bin configuration. For cabinetry where soft-close damping matters, sibling SKUs in the 4WCTM line carry that upgrade; this unit is the standard-slide option in the maple finish.

Where This Pullout Fits

This is the right choice for an 18-inch face-frame base cabinet earmarked for waste duty in a kitchen remodel or new build. It suits cabinet shops specifying a hardworking, no-frills double-bin unit for production kitchens, homeowners consolidating a trash and recycling setup that has been living on the floor, and contractors finishing a kitchen where the owner wants waste hidden behind a door. The 22-3/4 inch depth requirement means it is sized for a standard base cabinet, not a shallow run, so confirm available depth before ordering. This unit is designed for face-frame cabinets; for frameless construction, check the 4WCTM frameless-compatible variants.

Common Questions

Two Bins, One Cabinet, One Pull

This maple top-mount pullout handles trash and recycling in a single 18-inch face-frame bay, with full-extension slides and a 150 pound capacity that keeps the system working through a kitchen's daily routine.