
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf lazy susan bearing is a steel swivel bearing with stop made for lazy susan cabinet applications where controlled rotation and dependable hardware fit matter. This 7 inch lazy susan bearing is sold by Rev-A-Shelf Corporation as manufacturer part 4SBS-7-10 and is described as a banded wood steel swivel bearing in the Lazy Daisy line. Buyers looking for a lazy daisy bearing or a lazy susan replacement bearing often need a clear match on diameter, stop function, and pack quantity before ordering. This product is listed in the kitchen and bath cabinet accessories category and is supplied in a 10-pack box configuration for bulk purchasing. For cabinet lazy susan hardware planning, confirm your tray size, mounting pattern, and installation method before purchase.
Key specs to confirm: This Rev-A-Shelf lazy susan bearing is a steel swivel bearing with stop in a 7 inch diameter format. Before ordering, confirm that your cabinet layout, tray construction, and existing hardware are designed for a 7 inch lazy susan bearing. Buyers should also verify the mounting pattern, overall height, required clearance, and whether the stop function matches the intended direction and range of travel in the application. If you are replacing older cabinet lazy susan hardware, compare the original part number and physical dimensions directly. Load details, compliance information, and any performance ratings are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified product information indicates a 10-pack box quantity of the Rev-A-Shelf steel swivel bearing with stop. Additional fasteners or mounting components are not specified and should be confirmed before ordering.
What to verify before ordering: Check tray size, cabinet opening, mounting hole alignment, needed stop function, replacement part references such as RS4SBS-7-10 or RS4SB-7-10, and whether your project requires only bearings or also separate mounting hardware.
When a cabinet shop, installer, or serious DIY buyer needs a lazy susan replacement bearing, the main goal is usually simple: restore smooth rotation or build a new turntable assembly with the right hardware from the start. A bearing that does not match the tray size or mounting layout can delay the job, especially when the cabinet is already built and access is limited. This Rev-A-Shelf swivel bearing is identified as a steel swivel bearing with stop and a 7 inch lazy susan bearing, which gives buyers two of the most important verified details to check first.
In practical use, this type of hardware is commonly considered for wood lazy susan trays in kitchen and bath cabinetry. The verified web description connects it to banded wood steel swivel bearing use in the Lazy Daisy line, so buyers replacing an existing lazy daisy bearing should compare the old assembly carefully. If your current unit has a stop feature, that detail matters because a standard rotating plate without a stop may not behave the same way in service. If your old hardware has no visible part number, measure the bearing diameter and inspect the tray and base mounting points before ordering.
Bulk packaging also affects the buying decision. This product is sold in a 10-pack box quantity, which can make sense for cabinet production, service crews, or planned multi-unit repairs. For a one-off repair, buyers should confirm that the full-box quantity aligns with the project scope. If you are sourcing cabinet lazy susan hardware for a shop, the verified pack size can help with purchasing consistency across repeated installs.
Because only limited specifications are verified here, buyers should treat several fit points as confirmation steps rather than assumptions. Check the bearing height, hole pattern, and any required fasteners. Confirm whether the stop orientation suits the cabinet design and tray travel. If load capacity or technical installation details are critical to your project, those details should be reviewed in manufacturer documentation before installation. Follow manufacturer installation guidance and local building requirements where applicable.
When comparing a steel swivel bearing with stop to other lazy susan hardware, buyers usually look at four things: material, diameter, stop function, and purchasing format. This Rev-A-Shelf product gives verified clarity on each of those points at a basic level. It is steel, it includes a stop, it is sized at 7 inches in diameter, and it is sold in a 10-pack. Those details help narrow the choice for buyers who already know the application and need a matching part.
Generic rotating hardware can be difficult to compare because product listings often leave out whether the part is intended for cabinet lazy susan use or for another rotating fixture. Here, the product class and category clearly identify this item as lazy susan hardware from Rev-A-Shelf Corporation. That reduces ambiguity for buyers who want a product tied to cabinet accessory use rather than a general rotating plate.
Another useful comparison point is whether the listing supports replacement search behavior. Buyers often search with model-style references such as RS4SBS-7-10 or RS4SB-7-10 when they are trying to match an existing part in inventory or on a service ticket. Keeping those references aligned with the verified manufacturer part number helps avoid ordering the wrong bearing family. In short, this product is best evaluated by matching its verified 7 inch diameter, steel construction, stop function, and bulk pack format to the exact cabinet or tray assembly you are working on.
This lazy susan bearing is not universal. Buyers should confirm the 7 inch diameter, mounting layout, tray design, and stop requirement before ordering.
This Rev-A-Shelf swivel bearing is listed as manufacturer part 4SBS-7-10 and can be evaluated as a replacement by matching size and function.
This steel swivel bearing with stop includes a stop feature according to the verified product name and description.
This lazy susan replacement bearing has a verified 7 inch diameter.
Included fasteners are not specified. Buyers should confirm whether separate mounting hardware is needed for the installation.
This Rev-A-Shelf lazy susan bearing is sold in a 10-pack box quantity.
This banded wood steel swivel bearing is described for Lazy Daisy wood applications, but tray dimensions and mounting details still need verification.
This cabinet lazy susan hardware requires checking bearing diameter, mounting pattern, tray clearance, and whether the stop function matches the application.
Load capacity is not provided in the verified data. Buyers should confirm that detail with the manufacturer or technical documentation.
This lazy susan bearing should be installed using manufacturer installation guidance and local building requirements where applicable.
RS4SBS-7-10 is a useful search reference when you need to match this Rev-A-Shelf lazy susan bearing to an existing repair or cabinet build. Before purchase, confirm the 7 inch diameter, stop function, and whether the 10-pack quantity fits your job. Included accessories beyond the bearing pack are not specified, so verify any needed fasteners or related hardware in advance. Careful fit checks help ensure this steel swivel bearing with stop matches your tray assembly and cabinet layout.
Sold In: 10 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RS4SB-10-1 Mfr# 4SB-10-1 | Steel 10" D Swivel Bearing for Full Circle Lazy Susans No Stop, Rev-A-Shelf, 4SB-10-1 | ||||
Sold in: 10 Each | RS4SB-10-10 Mfr# 4SB-10-10 | Steel 10" D Swivel Bearing for Full Circle Lazy Susans No Stop, Rev-A-Shelf, 4SB-10-10 | ||||
Sold in: 1 Each | RS4SB-7-1 Mfr# 4SB-7-1 | Steel 7" D Swivel Bearing for Full Circle Lazy Susans No Stop, Rev-A-Shelf, 4SB-7-1 | ||||
Sold in: 10 Each | RS4SB-7-10 Mfr# 4SB-7-10 | Steel 7" D Swivel Bearing for Full Circle Lazy Susans No Stop, Rev-A-Shelf, 4SB-7-10 | ||||
Sold in: 1 Each | RS4SBS-10-1 Mfr# 4SBS-10-1 | Steel 10" D Swivel Bearing with Stop, Rev-A-Shelf, 4SBS-10-1 | ||||
Sold in: 1 Each | RS4SBS-7-1 Mfr# 4SBS-7-1 | Steel 7" D Swivel Bearing with Stop, Rev-A-Shelf, 4SBS-7-1 |