Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National rosette cap is a solid maple filler and cap trim piece in a fluted profile without a cove edge, used to finish the top or base of a column, pilaster, or decorative post where it meets a cabinet face, valance, or ceiling line.
A rosette cap is the terminating piece at the top or base of a decorative column or pilaster, the element that visually closes the run and separates the vertical shaft from the horizontal surface it meets. Without it, a column profile ends abruptly at the cabinet or ceiling line; with it, the transition reads as intentional and complete. The fluted profile on this cap carries the vertical reed detail of the column shaft into the cap itself, so the two pieces read as one continuous element rather than two separate parts. The absence of a cove edge gives the cap a crisp, squared-off termination rather than a curved return, which suits cabinetry with a more architectural character.
Maple is a tight, closed-grain hardwood that machines cleanly and holds a sharp profile edge, which is why it is a common choice for fluted and reeded millwork details where the groove edges need to stay crisp through finishing. Supplied unfinished, this cap is ready for the stain, paint, or clear topcoat that matches the rest of the cabinet run. If the surrounding cabinetry is already finished, note that new maple and aged or previously finished maple may start at different points under the same stain, so a sample finish on scrap from the same lot is worth doing before committing the run.
Cabinet shops building traditional or transitional face-frame programs with decorative columns, pilasters, or corner posts will find this cap at the point where a column shaft needs a finished head or base. Designers specifying a period kitchen or library wall with pilaster details use a rosette cap to bring the vertical elements to a resolved termination. Contractors installing pre-built cabinetry with column accents use it to close the gap between the column top and the soffit or valance above. In all of these, the rosette cap is the last piece that makes the column read as a column rather than a board.
Omega National mills this piece from maple. The product attributes confirm the wood species as maple; carry it as solid maple unless your shop's received stock indicates otherwise.
It means the terminating edge of the cap is flat or squared rather than finished with a concave cove return. The result is a more architectural, crisp edge at the transition point.
Unfinished. Apply your stain, paint, or clear coat on site to match the surrounding cabinetry.
Maple from the same production lot under the same stain will be close, but grain pattern, milling date, and stain absorption all affect the result. A test piece on stock from the same order is the reliable way to confirm the match before finishing the run.
Order this fluted maple rosette cap to bring a column or pilaster run to a clean, finished termination where it meets the cabinet line above or below.
Sold In: 1 Each