Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Camar 822-01-SX suspension bracket is a medium duty, 290 lb rated closet bracket designed as part of a wall hanging rail system, so it carries substantial closet loads in a controlled way for typical storage runs. This suspension bracket is built as a 10mm dowel mount left hand part, so it presses into matching 10mm holes on the cabinet or panel and establishes a repeatable fixed position for the rail system side. The bracket belongs to a closet bracket and rail system category, so it serves as a structural hanger between the rail and the wall or cabinet structure in closet, shelf, or garage organization layouts. The handed design means this 822-01-SX version is for the left side of the assembly, which helps installers keep layout orientation clear when planning multiple support points along a hanging rail.
This suspension bracket offers precision vertical and horizontal adjustment, allowing installers to fine-tune the final rail position relative to cabinets, walls, or closet panels once the dowelled bracket is in place. The bracket is a handed 10mm dowel mount in white, so the left hand configuration locates off 10mm holes and establishes a consistent datum that can still be shifted slightly using the available adjustments. Because the bracket belongs to a closet bracket and rail system, its vertical and horizontal adjustability helps align multiple brackets along a wall hanging rail so doors, shelves, or closet components line up cleanly after installation.
The Camar 822-01-SX suspension bracket is specified as part of a shelf, closet, and garage organization category, so it fits projects where a wall hanging rail system supports cabinets, shelves, or closet components in these storage areas. As a wall hanging rail system component, it works where installers want rails mounted to structural surfaces and then use suspension brackets as the link between the rail and the casework or panels carrying the stored load. The handed 10mm dowel mount in white makes this particular bracket suitable for layouts that use pre-bored 10mm dowel holes on the left side of a cabinet or panel, aligning the bracket consistently with system drilling patterns. Its medium duty 290 lb rating ties it to typical residential or light commercial closet and rail runs where a defined capacity gives installers a clear performance reference.
The all steel interior of the suspension bracket carries the working load within a metal structure, so the stresses from loaded rails are handled by a material suited to repeated support of hanging components. Around that, the solid plastic outer casting provides the exterior shape, giving the bracket a finished appearance while the steel core manages strength, which helps keep the visible portion of the installation presentable in closets or storage areas. The product description states that cover caps are not required, so the visible bracket body functions as both the structural element and the finished surface, reducing installation steps after mounting and adjustment. Precision vertical and horizontal adjustment built into the suspension bracket lets installers dial in rail height and projection, which is especially useful when aligning several brackets across a run so the wall hanging rail sits level and square to adjacent cabinets or panels. Because this specific model is a left hand handed 10mm dowel mount in white, it supports repeatable drilling and orientation during layout, with the dowel location establishing a fixed reference while the adjustment range allows final tuning for smooth, aligned closet or garage organization systems.
The Camar 822-01-SX is a medium duty, 290 lb rated suspension bracket for closet bracket and rail systems, so it serves as a structural connector in wall hanging rail installations.
The 10mm dowel mount design lets the bracket locate in pre-bored 10mm holes, giving a repeatable mounting point that speeds layout in system-based closet or cabinet construction.
The left hand description means this bracket is intended for the left side of the assembly, helping installers orient components consistently in a wall hanging rail run.
The all steel interior carries the structural load from the rail system, so the working forces transfer through metal rather than the outer casting during everyday closet use.
The precision vertical and horizontal adjustments allow fine tuning of rail height and projection, which helps align multiple brackets so rails and connected cabinets sit level.
The solid plastic outer casting surrounds the steel interior, providing a finished exterior surface while the steel core manages strength within closet or garage organization systems.
This wall hanging rail suspension bracket from Camar is described as medium duty and 290 lb rated, so it aligns with closet, shelf, and garage organization projects that need defined load handling. The handed 10mm dowel mount left hand configuration in white supports system drilling layouts where a consistent left side reference is valuable. With an all steel interior, solid plastic outer casting, and precision vertical and horizontal adjustment, the 822-01-SX offers a combination of strength, finished appearance, and fine tuning that fits closet bracket and rail system installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CM822-01-DX Mfr# 822-01-DX | Camar 822-01-DX suspension bracket, right hand white |