Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs from Camar in the Slim Series give a table-height solution that supports up to 220 lbs per leg, so a work surface or table can be built for tools, materials, or daily use with confidence in each support point. The 1-3/8 inch diameter steel construction concentrates strength into a compact footprint, which helps when laying out legs under tighter tops or narrower counters without sacrificing load capacity where the leg meets the floor. A fixed length of 27-3/4 inch establishes a standard table height, while the full extension height adjustment to 28-3/4 inch lets the installer fine-tune for floor variations or to match existing surfaces. The welded bracket at the top of each leg creates a solid, non-loose mounting interface to the table, helping the finished assembly feel rigid. The gloss black finish provides a uniform, finished look that matches dark components and hides minor scuffs in typical shop and office environments.
The Camar Slim Series table leg ships with a welded bracket at the top of the leg, so attachment to the table structure uses a fixed, factory-aligned interface that keeps the leg centered under its mounting footprint. This welded connection means the installer only aligns the bracket to the underside of the table, simplifying layout because there is no separate joint between bracket and tube to manage. The built in 1 inch adjustable feet provide a threaded-style vertical adjustment at floor level, letting the installer dial in final table height within the 27-3/4 to 28-3/4 inch range and eliminate rocking caused by minor floor irregularities. By combining a set table leg length with this integrated adjustment, the leg supports both precise height matching between multiple tables and quick corrections when a surface is out of level across its span.
The Slim Series steel table legs are categorized under work surface and tables, which positions them for use under desks, benches, and general-purpose tables where a standard sitting-height surface is needed. Their 27-3/4 inch table height dimension matches common table and desk builds, supporting projects ranging from office layouts to shop assembly benches. Because each leg has a load bearing capacity of 220 lbs, a four-leg table can support substantial distributed loads across the top, which benefits applications that see equipment, stacked materials, or heavier components on a regular basis. The 1-3/8 inch diameter helps when aesthetics call for a slimmer profile leg that still reads as solid, especially under lighter tops or modern designs where visible supports are part of the look.
The welded bracket at the top of each Camar Slim Series leg acts as a fixed reference surface, so installers can repeat hole layouts from table to table and expect the leg to land in the same position every time. With the steel tube permanently welded to this bracket, perpendicularity between the leg and the underside of the top is controlled by the factory, which helps reduce onsite adjustment time and alignment issues. The built in 1 inch adjustable feet provide a defined adjustment range, allowing installers to target the 27-3/4 to 28-3/4 inch full extension height band and keep multiple tables within that same working height. Using the gloss black finish as part of a standard palette lets projects maintain visual consistency across different rooms or phases, since later additions can match the original legs by specifying the same finish. The combination of known load capacity, controlled leg diameter, and fixed length with integrated adjustment supports repeatable, spec-driven builds where tables are expected to perform the same across an installation.
The Camar Slim Series steel table legs have a fixed length for a 27-3/4 inch table height and built in 1 inch adjustable feet, giving a full extension height adjustment range from 27-3/4 to 28-3/4 inches.
Each Slim Series steel table leg has a load bearing capacity of 220 lbs per leg, allowing tables to be designed for substantial distributed weight across the work surface.
The Camar Slim Series table leg is made of steel and has a 1-3/8 inch diameter, providing strength in a relatively slim profile that works well under modern table designs.
The Slim Series leg has a welded bracket at the top, so the leg and bracket form one rigid unit, making alignment to the underside of the table straightforward and helping maintain squareness over time.
The 380-7S-02 Slim Series steel table leg is offered in a gloss black finish, providing a consistent dark appearance that coordinates with many tops and environments.
These legs are part of the work surface and tables category, combining 27-3/4 inch table height, 1 inch adjustment, and 220 lbs per leg capacity to support standard desks, benches, and utility tables.
The Camar Slim Series steel table leg with 1-3/8 inch diameter, welded top bracket, and built in 1 inch adjustable feet offers a defined 27-3/4 to 28-3/4 inch table height range for standard work surfaces. The 220 lbs per leg load bearing capacity supports demanding shop, office, or utility applications where a stable table is important. The gloss black finish and Slim Series profile suit projects that call for both a clean look and documented performance. For projects specifying steel table legs in this size and capacity range, this 380-7S-02 model from Wurth Baer Supply aligns well with work surface and table builds that need controlled height and repeatable installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  CM380-70-02 Mfr# 380-70-02 | Steel Table Legs, 1" Adjustment, 1-3/8" Diameter, Table Height 27-3/4" to 28-3/4" Full Extension Height Adjustment, Gloss Black |