Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Binks Ergoflex air hose is a 3/8 inch inside diameter air hose assembly designed for spray equipment and spray gun setups, so it carries shop air from your supply to your gun in typical finishing layouts. The 25 ft length gives a defined working reach between the air source and the spray gun location, which suits many bench or booth configurations where mobility inside a fixed work area is important. The hose is described as 40% lighter weight and more flexible than standard air hose, so handling drag along the floor or over edges is reduced during spraying passes. That lighter, more flexible behavior helps reduce operator fatigue during repeated movements around workpieces. The assembly has a maximum working pressure of 200 psi, so it is suited to common compressed air pressures used with spray equipment while providing a clear upper working limit. Each end has a 1/4 inch NPS female connection, so it threads onto compatible male fittings in typical spray equipment air circuits.
This air hose assembly is built as a 3/8 inch inside diameter line, so it fits applications where that internal size aligns with air supply and spray gun requirements. The 25 ft length positions the hose for setups where the compressor, regulator, or manifold is fixed and the operator works within a defined radius in a shop or spray booth. With 1/4 inch NPS female connections at both ends, the hose threads onto male 1/4 inch NPS fittings in the air system, creating a direct path from air supply components to the spray gun or intermediate lines. The 200 psi maximum working pressure rating gives a clear boundary for system pressure, so the hose can be used in spray equipment arrangements that operate within that range. The Ergoflex designation, with 40% lighter weight and more flexibility than standard hose, makes the line easier to route along walls, floors, or overhead runs in spray environments.
This Binks air hose assembly fits spray equipment and spray gun applications where a 3/8 inch inside diameter hose is specified for air delivery. In shops using fixed compressors or regulated air stations, the 25 ft length creates a working zone that typically covers a bench area or a section of a spray booth. The 1/4 inch NPS female connections at each end align with systems using 1/4 inch NPS male fittings on regulators, manifolds, or gun whip hoses, so the hose can sit as a main supply line between these points. With a maximum working pressure of 200 psi, this hose suits spray layouts that run within that pressure range for air tools and spray guns. The lighter weight nature of the Ergoflex design means the hose places less load on the operator during continuous movement, which is useful around cabinets, doors, or other workpieces during finishing passes.
The 3/8 inch inside diameter of this air hose helps maintain airflow to spray guns, so atomization performance can stay stable as the operator moves around the work area. The 25 ft length reduces the need for multiple short sections in some setups, which simplifies the air path and may limit potential leak points at extra junctions. With a maximum working pressure of 200 psi, the hose operates within a defined limit that matches many shop compressors, supporting consistent delivery across typical spray pressures. The Ergoflex construction is described as 40% lighter weight and more flexible than standard air hose, which allows the line to lay more easily on the floor or around fixtures as the user walks around projects. That improved flexibility can help minimize hose memory or stiff spots that might pull against the spray gun, which supports smoother gun travel along cabinet faces and edges. The 1/4 inch NPS female connections at each end simplify integrating the hose into air circuits built around 1/4 inch NPS fitting standards, so installers can create repeatable hose configurations across multiple booths or stations.
The Binks 71-31101 is an Ergoflex air hose assembly described as 40% lighter weight and more flexible than standard air hose, which supports easier handling in spray equipment and spray gun applications.
The Binks Ergoflex air hose has a 3/8 inch inside diameter, which provides an internal air path suited to many spray equipment setups that require this hose size for airflow.
The Binks 71-31101 Ergoflex air hose is 25 ft long, which establishes a working range between the air supply and the spray area in typical booth or bench layouts.
The Ergoflex air hose assembly has a maximum working pressure of 200 psi, so it is suited to spray equipment systems that operate within that air pressure range.
This air hose has 1/4 inch NPS female connections on each end, allowing it to thread onto compatible 1/4 inch NPS male fittings in spray equipment air systems.
The Ergoflex air hose is described as 40% lighter weight and more flexible than standard hose, so it is easier to move around workpieces during regular spraying tasks.
The Binks Ergoflex air hose assembly 71-31101 pairs a 3/8 inch inside diameter with a 25 ft length, so it fits spray equipment layouts needing that airflow and reach. The 200 psi maximum working pressure aligns with many compressed air systems used for spraying. With 1/4 inch NPS female connections at each end, the hose ties into circuits built around 1/4 inch NPS fittings. The Ergoflex description of 40% lighter weight and more flexibility than standard air hose supports smoother movement around workpieces. For spray equipment setups built around these dimensions and connections, this hose can serve as a primary air run in shop or booth environments.
Sold In: 1 Each