SEALED STRIKE PLATE WHITE hermetically sealed

SEALED STRIKE PLATE WHITE For Magnetic Catches

SEALED STRIKE PLATE WHITE describes the SLJMP45 hermitically sealed strike from Sugatsune America, so installers get a defined strike point when using MC-JM sealed magnetic catches. This part is classified as a strike in the Locks and Latches category, so it serves as the mating component for the matching sealed magnetic catch in door, panel, or access applications. The strike is hermitically sealed in white plastic, which isolates the internal magnetic surface and helps eliminate metal particles in use, valuable where stray metal debris would interfere with motion or cleanliness. The white plastic exterior presents a neutral surface that visually ties in with light-colored surfaces. The product carries manufacturer part number MC-JMP45, so it can be ordered and referenced consistently on drawings or job schedules whenever this specific sealed strike is needed.

Key Sealed Strike Details For Daily Work

• Hermitically sealed construction surrounds the strike in plastic, which helps eliminate metal particles during operation, useful where loose ferrous dust would affect other hardware.
• Designed to be applied with MC-JM sealed magnetic catches, creating a matched catch-and-strike set that simplifies specifying parts for a given opening.
• White plastic exterior gives a clean-looking strike surface, helping the component blend with white or light-colored cabinetry and panels.
• Product is identified as SLJMP45 and MC-JMP45, so purchasing and site teams can match orders, prints, and installation locations without confusion.
• Classified under Locks and Latches as a strike, so it drops naturally into lock accessory schedules where a magnetic strike component is required.

Strike Plate Setup With Sealed Magnetic Catches

The SLJMP45 hermitically sealed strike is intended for use with MC-JM sealed magnetic catches, so layout revolves around aligning this strike face with the matched catch body. Because the strike is fully encased in white plastic, the contact surface presented to the MC-JM catch remains consistent over time, which supports repeatable holding behavior across multiple doors or panels on the same project. Being part of the Locks and Latches lock accessories group, this strike integrates into typical cabinet or enclosure layouts that already specify magnetic catches, enabling installers to assign a fixed location for each MC-JM catch and then position the SLJMP45 strike on the mating surface so engagement is reliable.

Using Hermitically Sealed Plastic Magnets On Projects

Where This Sealed Strike Plate Is Applied

The Hermitically Sealed Plastic Magnets Pull Force 6.6 lb White description highlights a sealed magnetic component with a 6.6 lb pull force, which supports light-to-moderate holding of doors, hatches, or panels where magnetic retention is preferred over mechanical latches. When paired with MC-JM sealed magnetic catches, the SLJMP45 strike serves as the target surface that the magnet engages, so every opening gains a defined close position. The hermetically sealed plastic body keeps the working portion of the strike enclosed, which helps prevent loose metal particles from the strike surface, an advantage in woodworking, cabinetry, or similar environments where metal dust could interfere with other components. The white finish also ties into projects using white fronts or panels, allowing the strike area to remain visually discreet when the door is open.

Why This Strike Design Supports Consistent Results

Because the SLJMP45 strike is hermetically sealed in white plastic, the internal surfaces remain isolated from the surrounding environment, which helps maintain a predictable interface for the MC-JM sealed magnetic catches over repeated cycles. The association with a 6.6 lb pull force gives installers a clear sense of the holding behavior available when this hermetically sealed strike and corresponding magnetic catch are used together, so they can anticipate how firmly a door or panel will stay shut during normal use. Being identified as a strike within the Locks and Latches lock accessories class also clarifies its role in the hardware set, which streamlines hardware schedules by separating the catch body (MC-JM) from the mating strike (SLJMP45). The dedicated MC-JMP45 manufacturer part number further supports reordering and replacement tasks, because maintenance teams can match existing components exactly when a like-for-like strike is required.

Common Questions About The MC-JMP45 Sealed Strike

Selecting This Sealed Strike For Your Project

The SLJMP45 hermitically sealed strike plate from Sugatsune America provides a defined mating component for MC-JM sealed magnetic catches in the Locks and Latches category, combining a 6.6 lb pull force description with a white plastic exterior that suits light-colored installations. The sealed construction helps eliminate metal particles around the strike area, valuable in woodworking or cabinetry settings handled by Wurth Baer Supply customers. Using the MC-JMP45 part number on drawings and orders ties field installations directly to this specific sealed strike, so future work on matching doors, panels, or access points can repeat the same configuration confidently.